Used Processing in New Jersey, USA

Mixer-Intensive 36 L (9.5 gallons) Stainless Steel 316 - IPP# 704420

• Manufacturer: Allen

Top: Bolt flat top Bottom: Weld cone bottom Agitator: 316SS worm type Shaft thickness: 3/4" (19mm) Worm diameter: 4 1/4" (107mm) varispeed gearbox. W/spare agit. Openings: top 1-12" (304mm) x 10 1/2" (266mm) feed...

Mixer-Intensive 40 L (10.6 gallons) Stainless Steel - IPP# 210344

• Manufacturer: Henschel

Unit has a 3" side bottom discharge with pneumatic flush valve

Mixer-Intensive 10 L (2.6 gallons) Stainless Steel 304 - IPP# 706465

• Manufacturer: Henschel

polished sanitary jacketed high intensity mixer highly polished, (3) sets of 2-blade on rotor manual s/steel plow non-flameproof motor. manual variable speed drive 1800 rpm to 3800 rpm c/steel straight jacket Hin...

Stainless Steel 321 Henschel FM-200-MB Mixer-Intensive - IPP# 706696

• Manufacturer: Henschel

clamped top with davit carbon steel jacket, Pneumatically operated discharge valve

Mixer-Intensive Stainless Steel Austenitic - IPP# 208448

• Manufacturer: Schugi Flexomix

400 Mixer Agglomerator capacity 17 m³/h air consumption 36 m³/h mixing chamber is Neoprene On each shaft are 2 sets with 6 knives each Knives at 360 degrees rotatable belt drive Motor: 100-58 A

Mixer-Twin Shell & Double Cone 3.3 m3 (116.5 ft3) Stainless Steel 316 - IPP# 704810

• Manufacturer: APV Mitchell

Type: Double cone mixer Cone dimensions: 2130mm diameter x 600mm straight side, with (2) 1020mm long cone sections Openings: cones 2-300mm, 1-36mm, 1-36mm, 1-12mm; straight side 1-36mm.

Double Arm Mixer JH Day Mogul Stainless Steel 304 - IPP# 103823

• Manufacturer: JH Day

jacketed double arm mixer Shell rated atmospheric Front mixing blade 45/30 rpm, rear mixing blade 30/20 rpm x-proof motor and starter box.

Mixer-Double Arm 6 L (1.59 gallons) Stainless Steel - IPP# 202706

• Manufacturer: Guittard

pilot size stainless steel double arm mixer Mixing bowl 200 x 200 mm x 150 mm deep. Sadivar type VCA variable speed drive. Top cover has 50 mm nozzle and 25mm sight glass.

Mixer-Double Arm 3,312 L (875 gallons) Carbon Steel - IPP# 202136

• Manufacturer: Baker Perkins

size 20 TUEM jacketed,no cover with unit Bowl tilting time 35 seconds. Mixing trough 58.5" . Front blade output speed 25.5 RPM. Rear blade output speed 14.5 RPM. Mixing arms V belt driven Main drive equipped with...

Mixer Double Arm Fritz Meili (Zurich) Stainless Steel 316 Clad - IPP# 92295

• Manufacturer: Fritz Meili (Zurich)

240 gal (900/1400 liter) sigma blade jkt mixer. Btm discharge. 1160mm wide x 810mm deep x 1160mm long. Geared both ends. W/Flander right angle gear reducer. Mixing arms speed 168/84 rpm. Btm valve pneumatically o...

Mixer-Double Arm 450 L (118.9 gallons) Stainless Steel 304 - IPP# 36127

• Manufacturer: Werner & Pfleiderer

jacketed vacuum blender. With hydraulic tilt discharge. Hydraulically operated compression plate. Geared both ends. 60/100 KW (78/130 HP), 3/50/380 volt motor, 740/1480 rpm Coupled to Wulfel gear reducer Mdl FVKA...

Mixer-Double Arm 750 L (198.1 gallons) Carbon Steel - IPP# 704851

• Manufacturer: JH Day

jacketed mixer Trough size 42" deep x 38" wide x 46" long. carbon steel "Z" blades. Packing glands. Full insulation on trough. Openings: top 24" x 20" manway with hinged cover, 1-1/2"; jacket 8-1", 1-1/2"; bottom...

Mixer-Double Arm 263 L (69.5 gallons) Stainless Steel 316 - IPP# 703785

sigma blade mixer Trough size 31" long x 27" wide x 30" deep. 316 stainless steel body, carbon steel endplates non-flameproof motor. Geared both ends. Unit has 90 degree tilt mechanism which is gear driven by 1.5...

Mixer-Double Arm 500 L (132.1 gallons) Stainless Steel 316 - IPP# 703787

Trough size 39 1/2" x 27" wide x 27" deep. 316 stainless steel body with carbon steel ends plates. (2) carbon steel sigma blades. Geared both ends Unit has 90 degree tilt mechanism which is gear driven by 1.5 KW,...

Carbon Steel Mixer-Double Arm - IPP# 212417

• Manufacturer: JH Day

Mogul line heavy duty design jacketed trough cored shafts with Double nobben blades for extra shearing actions, tangential shaft design, packing glands on shafts. Front agitator rated 30 RPM, rear agitator rated ...