Used Processing in Missouri, USA

TAMROCK ZOOM TRACK HYDRAULIC DRILL 510118

• Manufacturer: Tamrock

Tamrock Zoom track model 600. Catt 3116 engine with approx 1000 hours. Unit has 8915 hours, drifter 7275 hours. Needs new seat and to be cleaned up. Drill runs and was working when parked.

2004 FURUKAWA 1200ED w/ 12,764 FRAME HRS (REMAN @ 6874HRS) & 6046 IMPACT HRS. 510140

• Manufacturer: Furukawa

(2004) FURUKAWA 1200ED w/ 12,764 FRAME HRS (REMAN @ 6874HRS) & 6046 IMPACT HRS. (2004) Furukawa 1200ED with 12,764 frame hours (Re-man engine @6874 hrs) and 6046 impact hrs (resealed @ 5724hrs). 5.9 Cummins engin...

2002 TAMROCK 700-2 HYDRAULIC DRILL WITH 6876 HRS & 2981 IMPACT HRS 510136

• Manufacturer: Tamrock

(2002) TAMROCK 700-2 HYDRAULIC DRILL WITH 6876 HRS & 2981 IMPACT HRS (2002) Tamrock 700-2 hydraulic drill with 6876 hrs on Cat 3126 engine and 2981 impact hours. Set up for T45 steel with rod changer. Overall, go...

SHOPBUILT 30″ X 50′ TRUSS CONVEYOR 162013

• Manufacturer: Shopbuilt

SHOPBUILT 30″ X 50′ TRUSS CONVEYOR Shopbuilt 30″x50′ truss conveyor with 3x3x1/4 main cord & 2x2x1/4 lattice. 45 degree idlers, 2-ply belt, lagged head pulley, wing-tip tail pulley, & gearbox (no motor). Good con...

JOY MS-2A 530020

• Manufacturer: Joy

Year: MS-2A air track drill with Joy VCR360 hammer, square boom, operator noise sheild, and operator controls. Includes dust collector, but not installed. Drill is ready for work.

BARBER-GREENE 30″ X 42 162009

• Manufacturer: Barber Greene

Year: 3 sets of legs and 20″ OD wing tail pulley. Conveyor has 20 degree Marco idlers and Dodge TD-7 gearbox and electric motor. Wiring and starters included. Good condition.

SHOPBUILT 30″ X 80′ TRUSS CONVEYOR 162012

• Manufacturer: Shopbuilt

SHOPBUILT 30″ X 80′ TRUSS CONVEYOR Shopbuilt 30″x80′ truss conveyor with 3″x5″ main cord & 3″x3″x1/4″ lattice. Has a 24″ 2-ply belt, gear box, but no motor. Wing tip tail pulley & lagged head pulley. 35 degree se...

SHOPBUILT 30″ X 16′ CHANNEL CONVEYOR 163074

• Manufacturer: Shopbuilt

SHOPBUILT 30″ X 16′ CHANNEL CONVEYOR Shopbuilt 30″x16′ channel conveyor with 35 degree idlers, 5″ cans, & 2-ply belt (good). Has gearbox, but no motor. Good condition.

Votator 6x72

• Manufacturer: Votator

Cherry Burrell Votator Scraped Surface Heat Exchanger 6x72 single barrel - Shown As Is but we can recondition if needed. S/N 3455353. Direct Driven by 20HP motor, 1755 rpm/230 rpm out. All wetted surfaces are ...

Filter Bag

Filter bags for polish filter, size #2. There are 6 boxes of 25 bags each. P2S Polyester Felt Filter Bag. Bags measure 2 ft 5 in long. Priced for the LOT.

1995 United Equipment Technologies XCEL 22

• Manufacturer: United Equipment Technologies

Gearbox and motor - inline. Was originally used for top entering agitator, United Equipment Technologies Model Xcel-22, S/N C1641-7B. Falk right angle gear box. Includes Motor 10HP, 1800 rpm. [Photos of sh...

1995 Heat Exchanger, Plate ss 280 sf

• Manufacturer: APV

APV stainless steel plate heat exchanger. MAWP 200 PSI @ 320 F. MDMT -20 F @ 200 PSI. Surface area: 280 sq. ft. with 2" inlets/outlets. Includes 153 ss316 plates at 0.6mm thick. S/N 30326.1. Last used as a prod...

Unknown 100 HP Blower

• Manufacturer: Unknown

This unit was blowing dust to a large baghouse in a large facility. There is also a 75 HP blower and baghouse available at the same location. Piping is available. Unit will be loaded on the truck.