Used Processing in Indiana, USA

Wipotec OCS EC Checkweigher High Speed Belt Weigh Conveyor 100Lb 43"W x 71"L

• Manufacturer: Wipotec
• Model: EC

Wipotec Model EC. Mfg Date 2019. Condition & Set-Up: In Good Used Condition, Removed from a Working Environment. Includes 115V Control panel with Main control board 26400162. Load cell IW-B-150K-FS-8-10-12-2...

Dematic 39"x 10' Gapper Conveyor 34" Belt 2-Speed Package Gapping 90/160fpm

• Manufacturer: Dematic

Motor & Gearbox: 1Hp 230/460V 3PH 30:1 Gearbox. Voltage tested and wired for:: 460V If this item ships as Flat Rate Freight please see details in Shipping tab

Dematic 39"x 10' Gapper Conveyor 34" Belt 2-Speed Package Gapping 90/165fpm

• Manufacturer: Dematic

Note: Unit has transition roller shown in images, but is not included Motor & Gearbox: 1Hp 230/460V 3PH 30:1 Gearbox. Voltage tested and wired for:: 460V If this item ships as Flat Rate Freight please see details...

Transnorm TS1500/140 90° RH Curve 32" Belt Conveyor 420 FPM Belt Drive 460V 3PH

• Manufacturer: Correa

Conveyor Section In Good Used Condition. Tested in our shop. Transnorm Slider Bed Belt Drive. TS1500/140. 90° Right Hand Curve Section. Drive is on the outside of curve. Sew-Eurodrive Gearmotor 3Hp 230/460V 3PH...

Dayton 3C414B Tubeaxial Fan 36" Belt Drive 5 Hp Motor 208-230/460V Ventilation

• Manufacturer: Dayton
• Model: 3C414B

Used, in Good Working Condition, Tested OK. This unit has a 5 Hp motor 208-230/460V. Tested at 460V. Clean unit. Aluminum fan has some oxidation. 36" ID 29" long housing If this item ships as Flat Rate Freight pl...

Hytrol 914.24430T Belt Conveyor Take-Up Pulley 8-5/8"x 43"BW 1-15/16"Shaft XT35

• Manufacturer: Hytrol

New surplus. Crowned take-up pulley with XT35 bushings. 8-5/8" Dia. 42" Roller tube length. (rolling surface) 43" Conveyor bed width. 1-15/16" Shaft dia. 2-7/16" XT35 Bushings. 50-1/2" Overall width. (End to end ...

Automotion 24"x 10' Gravity Roller Conveyor 21.5"BF 1.9" Rollers 7-Sections 70'

• Manufacturer: Automotion

Rollers set high on frame or below frame?: High If this item ships as Flat Rate Freight please see details in Shipping tab

40"W x 48"L Pallet Conveyor 36" Grip Belt with Live Roller On Ramp 3PH 205FPM

Drive Type: Direct drive belt section with Slave driven roller section used for on ramp. Drive is on left hand side. Frame Width: 40" Belt conveyor frame width. 51" Roller section frame, 45-3/4" Between frame. ...

Magnetic Chip Conveyor Scraper Chain w/Coolant Filters 41-44"H 96"L 230/460V 3PH

Drive type, motor specs: Chain drive. 0.2kw 230/460V 3PH 200:1 Reducer Voltage tested at and wired for:: 230V 3PH If this item ships as Flat Rate Freight please see details in Shipping tab

UMD 8' 8"W x 15' MatTop Plastic Roller Belt Conveyor 98"BF 3PH Belt Drive 112FPM

• Manufacturer: Correa

Voltage tested and wired for:: 460V Ship weight is approximate. Product Videos If this item ships as Flat Rate Freight please see details in Shipping tab

UMD 8' 8"x 15' MatTop Plastic Roller Belt Conveyor 98"BF 3PH Belt Drive 112FPM

• Manufacturer: UMD

Voltage tested and wired for:: 460V Ship weight is approximate. Product Videos If this item ships as Flat Rate Freight please see details in Shipping tab

Eurosort Sorter Conveyor Flex Drive .75kw 230/460V Gearmotor G50BB111MHAR2C00

• Manufacturer: Eurosort

In Good Used Condition. Unit has the inverter removed from the motor. Drive is off a Eurosort tray tipper sorter system. .75kw 3PH Gear Motor 10.46 Ratio Reducer. If this item ships as Flat Rate Freight please se...

Hytrol 914.8490 Belt Conveyor Idler Pulley 8-5/8"x 49"BW 1-15/16"Shaft XT35

• Manufacturer: Hytrol

New surplus. Crowned take-up pulley with XT35 bushings. 8-5/8" Dia. 48" Roller tube length. (rolling surface) 49" Conveyor bed width. 1-15/16" Shaft dia. 2-7/16" XT35 Bushings. 57-1/2" Overall width. (End to end ...

New London Engineering 11"x 5' Incline Conveyor 8"Belt .33Hp 115/230V 1PH 90FPM

• Manufacturer: New London Engineering

Motor & Gearbox: .33Hp 1750 RPM 115/230V 1PH Motor 20:1 Gearbox Bed Height (From Floor): Has a taller leg at drive end for incline use, 28-1/2" minimum flat height. Tail end: 25" to 33" Drive end: 28-1/2" to 3...

New London Engineering 21"x 10' Incline Conveyor 12" Cleated Belt .5Hp 3PH 25FPM

• Manufacturer: Correa

Motor & Gearbox: 1/2Hp 1750 RPM 230/460V 3PH Motor 60:1 Gearbox Bed Height (From Floor): Infeed: 31" min to 52" Max. Discharge: 45" to 58" Current Height is 31" at low end, 56" at top. Bracing will need remov...