Used Processing in Canada

2,410 Litres stainless steel tank

-On 4 stationary legs that are adjustable, rughly 42” tall -Cone bottom with dimples -Port on very bottom is 3”, two other drains on the bottom both 2” -Tri clamp ports at the bottom side are 2” -Cone top -Man ho...

Cone Bottom Carbon Steel Hopper Tank

-Diameter: 9ft -Top opening: 36" x 36" -Two bottom openings: 20" x 20" -Length of legs: 73" or 6.1 ft -Attached to the hopper bottom is a Vibco 250 -Monitor: -Model: KA -Power: 115 V~50/60 Hz -UL listed -Total di...

Read co. Continuous Mixer

-master motor:1/3 HP -1 Phase -.4 AMPS -1725 RPM -115 v -z blades

Hibon blower

• Manufacturer: Hibon

-Model 2051-HCZ -Serial 5V015-63 -230/460 volt @ 1750 rpm -3 IN STOCK

590 Litres Closed top plastic tank

-Closed top with manhole opening -Flat bottom -Measurements on side in us gallons -2"nipple on the side at the bottom -1" nipple on the side at the top 53.5" tall -30" diameter -130 imp gall

1,100 Litres Sanitary Variable Capacity Stainless-steel Tank (VCT)

-Lid inlet : 1-3/8” -Bottom outlet : 1-3/8” -Valve mid way : 3/8” -Inside dimensions: 45” deep by 45” inside diameter -3 in stock -Shipping dimensions: -Height: 61”-Diameter: 51” -Weight: 150 pounds

454 Litres tank with mixer

• Manufacturer: Lightnin

-40" tall x 31" diameter -Jacketed stainless steel -Lightnin mixer on top -Max 50 PSI at 350 -3 legs 16" -Manhole top -3" nipple at the bottom

Fischer Porter Flowmeter

• Manufacturer: Fischer

-Manufacturer: Bailey Fischer Porter -Model: 10A3555S -SN: 443592 01 01 -CRN #: OF2766.5 -Max design pressure: 690 kPa. gauge -(100 psig) @ 38 degrees C (100 degrees F)

260 Litres stainless steel open top tank

-Dome bottom -Drain on bottom is 2” diameter -Four stationary legs 15” tall -Open top -Tank dimensions: 38” tall x 23.5” wide

Motor with Dual Blowers

HP: 1/2 Volt:575 Phase:3 RPM: 1165 Characteristics: Industrial Process + Tanks, Stainless Steel, Used | Price (cdn$): $400.00

Spencer Blower

• Manufacturer: Spencer

-Shipping dimensions: 50" L x 36" W x 42" H -Inlet/outlet: 4 3/4" -Volt: 230/460 -RPM: 3500 -HP: 15 -375S CFM -Type UT TE

Sifter table Lid

-Shipping dimensions: Height 7" x Width 48" x Length 48" -Top diameter: 14 3/4" -3 in stock

Shaker table riser

-Shipping dimensions: Height 10" X Width 58 1/2" X Length 69 1/2" -Side shoot diameter: 8" -3 in stock -50" diameter

DAF System

• Manufacturer: DAF

MGM Motor -330 Volt -60 Hz -3 Phase -1680 RPM Characteristics: Industrial Process + Tanks, Water Treatment, Used | Price (cdn$): $16,380.00

Hoshizaki KM-520 Ice Machine

• Manufacturer: Hoshizaki
• Model: KM-520

Good condition Hoshizaki KM-520 Ice Machines. Located in USA and other countries. Click request price for more information.