Used Lathes in Netherlands

Trusted Seller
Assorts - Lathe Alignment Test Bar
- Manufacturer: Assorts
Manufactured from high precision alloy steel. Hear treated to a hardness of 58 +/-2 HRC. Precision ground & inspected for a contrcitiy within 0.0001" & parallelism. Ideal for aligning headstock & tailstock in Lat...
Mierlo, Netherlands
Trusted Seller
Assorts - Vertical Slide for Lathe - Fixed
- Manufacturer: Assorts
This is an accessory item compatible for Myford ML7 Lathes and other smaller mini lathes. Table size is 125 mm x 100 mm. It has a reading bush at the handle for calculating accurate travel of the bed and hence a ...
Mierlo, Netherlands
Trusted Seller
Rogi WM210V BRUSHLESS lathe
- Manufacturer: Rogi
- Spindle bore: 21 millimeter
Two speed bands allow maximum torque in the lower speed Infinitely variable from 50-2500 rpm Double vee bedway - hardened and ground Adjustable gibs to slideways Off set facility to tailstock Tailstock quill engr...
Mierlo, Netherlands
Trusted Seller
Rogi WM180V BRUSHLESS lathe
- Manufacturer: Rogi
- Spindle bore: 21 millimeter
Two speed bands allow maximum torque in the lower speeds Infinitely variable from 0-2500 rpm Double vee bedway - hardened and ground Adjustable gibs to slideways Off set facility to tailstock Tailstock quill engr...
Mierlo, Netherlands
Trusted Seller
Rogi WF290V-F INVERTER lathe
- Manufacturer: Rogi
- Spindle bore: 38 millimeter
1500W AC motor inverter drive DELTA inverter Extremely quiet vibration free operation Full torque throughout the speed range 50-1800 rpm Large 38 mm spindle bore Dedicated feed shaft for longitudinal and cross...
Mierlo, Netherlands
Trusted Seller
Rogi WF250V-Fx750 INVERTER lathe
- Manufacturer: Rogi
- Spindle bore: 26 millimeter
Delta inverter drive with AC motor Infinitely variable speed from 30 - 2200 rpm Double vee bedway - hardened and ground Adjustable gibs to slideways Offset facility to tailstock Tailstock quill engraved metr...
Mierlo, Netherlands
Trusted Seller
Assorts - 60 mm Steel Vice Mounted on Lathe Vertical Slide
- Manufacturer: Assorts
This is an accessory item compatible for Myford ML7 Lathes and other smaller mini lathes. It has a reading bush at the handle for calculating accurate travel of the bed and hence a precise job. The thread comes b...
Mierlo, Netherlands
Trusted Seller
Rogi WM1100 lathe
- Manufacturer: Rogi
- Spindle bore: 105 millimeter
Heavy duty industrial lathe The surface of the bedways is supersonic frequency handened Rapid feed structure is available on apron Clutch in headstock makes the lathe start smoothly and brake quickly Standard...
Mierlo, Netherlands
Trusted Seller
Rogi WM910 lathe
- Manufacturer: Rogi
- Spindle bore: 105 millimeter
Heavy duty industrial lathe The surface of the bedways is supersonic frequency handened Rapid feed structure is available on apron Clutch in headstock makes the lathe start smoothly and brake quickly Standard...
Mierlo, Netherlands
Trusted Seller
Rogi WM800 lathe
- Manufacturer: Rogi
- Spindle bore: 105 millimeter
Heavy duty industrial lathe Hardened and ground bed way and gears in headstock are with long life and low noise Clutch in headstock makes the lathe start smoothly and brake quickly Gear grooves are available o...
Mierlo, Netherlands
Trusted Seller
Rogi WM1000 lathe
- Manufacturer: Rogi
- Spindle bore: 105 millimeter
Heavy duty industrial lathe The surface of the bedways is supersonic frequency hardened. The guide rail of the bed is finely ground after ultra-light audio quenching. The spindle system is high in rigidity and...
Mierlo, Netherlands
Trusted Seller
Rogi WF250V-Fx750 DIG INVERTER lathe
- Manufacturer: Rogi
- Spindle bore: 26 millimeter
Delta inverter drive with AC motor Infinitely variable speed from 30 - 2200 rpm Double vee bedway - hardened and ground Adjustable gibs to slideways Offset facility to tailstock Tailstock quill engraved metric an...
Mierlo, Netherlands
Trusted Seller
Rogi WM630 lathe
- Manufacturer: Rogi
- Spindle bore: 105 millimeter
Heavy duty industrial lathe Hardened and ground bed way and gears in headstock are with long life and low noise Clutch in headstock makes the lathe start smoothly and brake quickly Gear grooves are available o...
Mierlo, Netherlands
Trusted Seller
Rogi WM500BX2000 lathe
- Manufacturer: Rogi
- Spindle bore: 80 millimeter
Heavy duty industrial lathe Hardened and ground bed way and gears in head-stock are with long life and low noise Spindle system is of high rigidity and precision Rapid feed structure is available on Apron Hea...
Mierlo, Netherlands
Trusted Seller
Rogi WM660x2000 lathe
- Manufacturer: Rogi
- Spindle bore: 105 millimeter
Heavy duty industrial lathe Hardened and Ground Gears Induction Hardened Bedways Wide Carriage for Stability Multi Position Longitudinal Stop Large Spindle Bore 105 mm Foot Brake Slow Start Clutch Leadscrew & Po...
Mierlo, Netherlands
Mazak INTEGREX 400 Lathe
- Manufacturer: Mazak
- Model: INTEGREX 400
Good condition Mazak INTEGREX 400 Lathes available between 2002 and 2008 years. Located in Japan and other countries. Click request price for more information.
Japan