Used Heat Exchangers in Utrecht, Netherlands

Alfa Laval M10

• Manufacturer: Alfa-Laval
• Model: M10

Current configuration: 1 Section. Connections: head: 2 up and 2 down, follower 0.

1995 Alfa Laval CLIP10-RM

• Manufacturer: Alfa-Laval

Pressure: 10 bar. Current configuration: 1 Section. Connections: head: 2 up, follower 2 up.

N.N. Monotube

• Manufacturer: N.N.

Monotube. 1 Tube with internal spiral. Length: 150 cm, outside diameter 70 mm, inside diameter 50 mm. Connections, product: DN50 Clamp and service: DN16, DIN.

2010 Alfa Laval C8

• Manufacturer: Alfa-Laval

Plate cooler, 2 sections, 90-36 plates. Connections: Head 2 Up, Follower 2 down.

2015 Tetra Pak Hot water set / MT-108

• Manufacturer: Tetra Pak

Hotwater set with tubular heat exchanger, steam valve (Samson) and piping. Pressure: shell 0-15 bar, tubes 0-40 bar. Temperature: shell 0-180 °C, tubes 0-180 °C. Volume: shell 9,3 liter, tubes 6,1 liter.

N.N. SS insulated lab holding

• Manufacturer: N.N..

Laboratory insulated mobile holding with 3 loops. A.) 1.66 l - 1 min. 100 l/h. B.) 3.32 ltr - 2 min - 100 l/h. C.) 3.23 ltr - 2 min - 100 l/h. Connections: 2 x 1" Din - 2 x 15 mm Din. Total dimensions: 80x43x105 ...

N.N.. SS

• Manufacturer: N.N..

Double jacketed pin mixer. Shaft diameter 85 mm, 3 rows with 14 pins (42 pieces total) - cylinder diameter 250 mm with 2 rows with 19 and 20 (total 39) pieces. Cylinder length 195 cm. Connections: 2 x 2" Din and ...

Tubular Heatexchanger

Monotube, inner diameter (product) 23mm outer diameter (water) 40mm, 42 tubes x 3 mtr each. total dimensions: Length 3.00 mtr x Width 1.30 m, Height 1.50 mtr. On a stainless steel frame. Flexible in using, many l...

1972 Paasch & Silkeborg H-3575

• Manufacturer: Paasch & Silkeborg

Tubular Heatexchanger 36 tubes, total dimensions: L 320cm X W 80cm X H 140cm

2006 Alfa Laval C10-SR

• Manufacturer: Alfa-Laval

Design pressure: 10.0 bar, design temperature: -10 / 110 ° C, test pressure (Gauge): 13.0 bar

2008 Tetra Pak MS10-SR

• Manufacturer: Tetra Pak
• Model: MS10SR

Pressure: 10 bar / Beam length: 1000 mm, connections: 97 mm / 4 "SMS Currenct configuration: 1 Section: 44 plates - Connections head: 2 up, follower 2 down Total dimensions: lxwxh: 125 cm x 67 cm x 130 cm.

2009 Tetra Pak Hot water set / MT-108

• Manufacturer: Tetra Pak

Hotwater set with tubular heat exchanger, steam valve (Samson) and piping. Pressure: shell 0-15 bar, tubes 0-40 bar. Temperature: shell 0-180 °C, tubes 0-180 °C. Volume: shell 9,3 liter, tubes 6,1 liter.

1995 Tetra Pak Spiraflow TTF-38s/16c-3-1

• Manufacturer: Tetra Pak
• Model: TTF38

Monotube, outer diameter 38 mm (smouth) and inner diameter 16 mm (coagurated). 6 Tubes of 3 meter. Product side: pressure up to 60 bar - temperature up to 160 °C - volume: 1 liter per tube, total volume 6x 1 = 6 ...

1959 Stork DS

• Manufacturer: Stork

Stork DS Pre-sterilizer no: 13384 Capacity: 2000 liters per hour

2005 APV Crepaco SSHE

• Manufacturer: Crepaco

Scraped heater - cooler set, used as sterilizer, including 3 holding tubes 30 - 30 - 210 seconds (various options possible on swingbend panel). Each scraped heaterexchanger has a temperature indicator on water an...