Used Forging

Trusted Seller
3.15 tons Hammer Forging Hydraulic Lasco KH315
- Manufacturer: Lasco
- Model: KH315
Capacity : 3.15 tons, Energy of blow : 3150 kgm, Falling height : 1100 mm, Weight of falling ram : 2900 kg, Max. weight of die : 530 kg, Way between slides : 700 mm, Motor power : 40 KW, Total height : 682...
Europe
Trusted Seller
2 tons Hammer Forging Open Die Pneumatic Romanian
- Manufacturer: Romanian
Capacity : 2 tons, Ram weight : 2000 kg, Max. ram working : 1200 mm, Height of the working area : 530 mm, Distance between three uprights : 2300 mm, The distance from the level the lower anvil from the groun...
Europe
Trusted Seller
2.5 tons Hammer Forging Pneumatic Huta MPM2000A
- Manufacturer: Huta Zygmunt, Polish
Forging Hammer CM2500 made by Progresul Braila - Romania Capacity : 2.5 tons, Weight of the ram : 2480 kg, Ram stroke : 950 mm, No. of stroke per min : 90, Shut height till ram : 650 mm, Shut height till ta...
Europe
Trusted Seller
3.5 tons Hammer Forging Pneumatic Huta MPM3000
- Manufacturer: Huta
Capacity : 3.5 tons, Weight of the ram : 3570 kg, Ram stroke : 1000 mm, No. of stroke per min : 90, Shut height till ram : 750 mm, Shut height till table : 1050 mm, Min. height of the models : 350 mm, Max....
Europe
Trusted Seller
1 tons Hammer Forging Pneumatic MPM3150B Huta
- Manufacturer: Huta Zygmunt, Polish
Capacity : 1 ton, Energy of blow : 3600 kg.m, Weight of falling ram : 1250 Kg, Max. Tup stroke : 800 mm, Guideway spacing : 550 mm, Length of die steam in the tup : 500 mm, Length of die steam in the cushio...
Europe
Trusted Seller
3 tons Hammer Forging Open Die Pneumatic Romanian
- Manufacturer: Romanian
Capacity : 3 tons, Ram weight : 3150 kg, Total height above the foundation : 6185 mm, Height above the ground : 5975 mm, Width of the hammer : 2500 mm, Length of the hammer : 4935 mm, Table of the gabot : 4...
Europe
Trusted Seller
1 ton Hammer Forging Pneumatic Huta MPM3150C
- Manufacturer: Huta Zygmunt, Polish
U-Frame Capacity : 1 tons, Energy of blow : 3600 kg.m, Weight of falling ram : 1250 Kg, Max. Tup stroke : 800 mm, Guideway spacing : 550 mm, Length of die steam in the tup : 500 mm, Length of die steam in ...
Europe
Trusted Seller
0.75 tons Hammer Forging Pneumatic Huta MPM1600B
- Manufacturer: Huta Zygmunt, Polish
Capacity : 0.75 tons. Energy of blow : 18.4 KJ, Weight of falling part (without die) : 690 kg, Max weight of upper die : 200 kg, Weight of anvil block without die holder : 12.5 tons, Weight of hammer with an...
Europe
Trusted Seller
1 ton Hammer Forging Pneumatic Huta Zygmunt, Polish MPM1000
- Manufacturer: Huta Zygmunt, Polish
Capacity : 1 ton, Falling part weight : 1230 kg, Blow energy : 3500 kgm, Stroke per min. : 110, Max. ram stroke : 900 mm, Approx die size : 460 x 700 mm, Approx. weight of anvil in : 22.5 ton, Approx. tota...
Europe
Sakamura
- Manufacturer: Sakamura
Name: Sakamura | Age: 1996 | Hydraulics: — | Force: 1000 ton | Pressure: —
Schilde, Belgium
Trusted Seller
1 ton Hammer Forging Open Die Pneumatic Stanko M418
- Manufacturer: Stanko
- Model: M418
Capacity : 1 ton, Blow energy : 2700 mkg (27 kJ), Ram stroke : 950 mm, Number of strokes per minute : 95 1/min, Overhang : 800 mm, Ram weight : 1000 kg, Anvil weight : 11.8 tons, Driving power : 45 kW, 380...
Europe
Sakamura
- Manufacturer: Mitsui Seiki
Name: Sakamura | Age: 2007 | Hydraulics: — | Force: 800 ton | Pressure: 0.6 MPa | —: 32
Schilde, Belgium
Trusted Seller
75 Kg STANKO M41-29A SELF-COMPRESSING DRUM HAMMER
- Manufacturer: Stanko
Weight of falling ram: 75 Kg | Energy of blow: 140 Kg/m | Stroking rate: 210 s.p.m. | Max. stroke: 365 mm | Depth of throat: 300 mm | Striking surface: 145 x 65 mm | Working height above ground: 775 mm | Motor: ...
Peschadoires, France
Trusted Seller
COLD FORGING CARLO SALVI 246/TR 2 DIE 4 BLOW Operational
- Manufacturer: Carlo Salvi
- Model: 246
CARLO SALVI 246TR PERFECTLY WORKING 2 DIES - 4 BLOW 2 DIES - 4 PUNCHES CUT Ø 8 max CUTTING LENGTH 75 max SPEED 250 ppm FULLY FUNCTIONAL
Calolziocorte, Italy
Double blow header and threading Sacma KSP 01R
- Manufacturer: Sacma
Double strike press with rolling station SACMA KSP 01 R Year 1995 Number of dies 1 Cutting diameter (500N/mm²) 5 Cutting length (max) mm 57 Die ejection (max) mm 40 Punch ejection (max) mm 6 Thread (max) 8...
France