Used Extruders

20mm Werner & Pfleiderer Model ZSK20 Co-Rotating Twin Screw Extruder

• Manufacturer: WP
• Model: ZSK20

10151389 Used 20mm Werner & Pfleiderer Model ZSK20 Co-Rotating Twin Screw Extruder. Has 40/1 L/D barrel at 43" centerline height driven through a 3:1 gearbox with a 37-Newton meter torque capacity per screw shaft...

6″ NRM PM III -30:1 VENTED – AIR COOLED EXTRUDER

• Manufacturer: NRM

6″ NRM PM III -30:1 VENTED – AIR COOLED EXTRUDER REBUILT – approximately 43″ centerline height, gearbox having new bearings and seals with cooling system – new heat exhanger and pump, 30:1 L/D 8 zone barrel, cast...

Werner & Pfleiderer ZSK40 Twin Screw Extruder for Sale – 40mm, 50 HP

• Manufacturer: WP
• Model: ZSK40

10151368 Used Werner & Pfleiderer Model ZSK40, 40mm Co-rotating twin screw extruder. 1990 Model year. 46:1 L/D vented barrel with 11-barrel sections and a 41" centerline height. Driven by 50 hp 500 volt 1750/2100...

Werner & Pfleiderer UK2000AEL Sigma Mixer/Extruder – 316 SS, 793 Gallon Capacity

• Manufacturer: WP

10131017 Used Werner & Pfleiderer Mixer/Extruder, Type UK2000AEL. 316 Stainless steel construction. Total capacity 793 gallon (3000 liter); working capacity 530 gallon (2000 liter). Bowl 56.6" x 65.5" x 54.6" dee...

Coperian ZSK-18 ML Twin Scrw Extruders New 2008 (3 available)

Coperian ZSK-18 ML Twin Scrw Extruders New 2008 (3 available) Screw Diameter: 18 mm/twin screw 15 HP Centerline – 1100mm/43.3″ Water Cooled 460 volt

3.5″ Davis Std. 24:1 Extruder Model 35IN35

• Manufacturer: Davis-Standard

3.5″ Davis Std. 24:1 Extruder – Model 35IN35 – New in 1995 – but Refurbished since and not been used since … 50 HP AC motor and Drive Air Cooled 5 Barrel Zones – 3 Die Zones

Dynisco LME-120 Laboratory Mixing Extruder 65140

• Manufacturer: Dynisco

Dynisco LME-120 Laboratory Mixing Extruder The Dynisco LME Laboratory Mixing Extruder is a laboratory tool developed to evaluate the processability of a variety of plastics and rubbers from very fine powders to...

Welex 3.5" 30:1 L/D Extruder – 150 HP, Vented Barrel, Melt Pump & Screen Changer

• Manufacturer: Welex

10755146 Used Welex 3.5" 30:1 L/D Extruder. Electrically heated water cooled (closed loop) and vented barrel at an approximate 69" center line height. Center line height can be reduced approximately 8" by removin...

Rebuilt Davis-Standard 6” Extruder Model 60IN60TPIH – 500 HP, 30:1 L/D

• Manufacturer: Davis-Standard
• Model: 60IN60TPIH

51068004 Used Rebuilt Davis-Standard 6" Extruder Model 60IN60TPIH 500 HP, 30:1 L/D. 5/98, 43" center line height, 13.4:1 gearbox having new bearings (less thrust) with cooling unit, heat exchanger, motor driven...

American Kuhne AK120mm 30:1 Single Screw Extruder 2013

• Manufacturer: Kuhne

American Kuhne AK120mm 30:1 Single Screw Extruder 2013 Screw Size: 120 mm 30:1 L/D Ratio 200 HP motor Digital Controls 42″ Centerline Height Electrically heated – Air Cooled Barrel 480v

Gloucester Model 35250R2 3.5" Diameter Single Screw Extruder – Industrial Used

• Manufacturer: GloucesterGloucester

10755151 Used Gloucester Model 35250R2 3.5" Diameter Single Screw Extruder. 3.5" diameter screw, 32:1 L/D. Has an electrically heated, air cooled, vented, and plugged barrel at approximately a 65? center line hei...

Gloucester 3.5" Single Screw Extruder – Model 35250R2, 32:1 L/D, 100 HP Motor

• Manufacturer: GloucesterGloucester

10755150 Used Gloucester 3.5" Single Screw Extruder, Model 35250R2. 3.5" diameter screw, 32:1 L/D. Having an electrically heated, air cooled, and non-vented barrel at approximately a 65" center line height. Barre...

Industrial Twin Screw Extruder – Krauss Maffei Model KMD90, Electrically Heated, Oil Cooled Barrel

• Manufacturer: Krauss-Maffei

52102001 Used 90mm Krauss Maffei Model KMD90 Counter-Rotating Twin Screw Extruder. Has electrically heated oil cooled barrel. Driven by 40HP DC motor with SCR control. Includes temperature control panel.

Werner & Pfleiderer Mixer/Extruder – Type UK12-AU3, 21 Gallon Capacity, Carbon Steel

• Manufacturer: WP

48594 Used Werner & Pfleiderer Mixer/Extruder, Type UK12-AU3. 21 Gallon (80 liter) working capacity, 29.1 gallon (110 liter) total capacity. Material of construction is carbon steel on product contact parts. 20-1...