Used machine tools in Ohio, USA

930H Four Station Wheel Hub Drill, Ream and Tapping Machine With Gantry Transfer

This machines takes a large steel wheel hub directly from the incoming conveyor, rotates the part into the on-car position, gantry transfers the part to be drilled and reamed for the lug holes. It also adds in t...

125H Custom Vertical Machine with (2) Servo Tapping Units.

The customer already had the fixtures for this self-feeding servo tapping machine. Hause design a new layout with 2-axis ballscrew unit. For other custom machine needs, contact 3″ stroke dual-axis servo ballscrew...

141H Drill and Tap Spider or U-joint

Servo units all the way around, this machine drills and counterbores the grease ports, and drills and pipe taps the Zerk Fitting hole. For other custom machine needs, contact (6) Servo Ballscrew drilling and ta...

965H Eight Station Trunnion For Machining Brass Fire Sprinkler Heads

Palletized conveyor with robotic load and unload, this machine produces a sprinkler head every 2.5 seconds. It completes an OD turning, OD taper pipe thread, taper ream, u-axis machining (programmable), drilling...

124H 8-Station Dial Index Machine For Drilling And Tapping Chain Shackles

This machine has 5 machining stations, 1 loading, and 1 unloading. Operator loads and actuates the machine, which then center drills, drills, and taps the chain shackles. The machine also unloads the parts auto...

8" OSTER MODEL #8R RAPID PIPE & BOLTS THREADER: STOCK #79931

• Manufacturer: OSTER

Stock#: 79931 | Erial: 1PX-114 | Bolt capacity: 2" TO 6" | Pipe diameter capacity: 2-1/2" TO 8" | Longitudinal carriage travel: 25" | Spindle hole: 10-1/4" | Spindle speeds: (6) 7 TO 42 RPM | Die-head design: ST...

4" RIDGID MODEL 124 BOLT AND PIPE THREADER: STOCK #77026

• Manufacturer: Ridgid
• Model: 1224

Stock#: 77026 | Pipe capcaity: 1/4" TO 4" | Bolt capacity: 1/2" TO 2" | Threading speeds: (2) 12 & 36 RPM | Reaming attachment: YES | Cutter attachment: YES | Forward / reversing: YES | Electric foot trip: YES |...

4" RIDGID MODEL #1224 BOLT & PIPE THREADER: STOCK 77035

• Manufacturer: Ridgid
• Model: 1224

Stock#: 77035 | Pipe capacity: 1/4" to 4" | Bolt capacity: 1/2" to 2" | Threading speeds: (2) 12 & 36 rpm | Reaming attachment: YES | Cutter attachment: YES | Forward / reversing: YES | Electric foot trip: YES |...

5' WILTON FLEX ARM PNEUMATIC TAPPING SYSTEM: STOCK #79635

• Manufacturer: Wilton

ADJUSTABLE TABLE HEIGHT .. YES Stock#: 79635 | Arm reach: 60" | Tap capacity: 1/2" | Rpm: 400 | Torque: 28 FT/;BS | Air: 90 PSI | Quick change chucks: 13 | Quick change 3/8" jacobs chuck: 1 | Area of table: 30" X...

FLEX ARM MODEL S-36 TAPPING ARM: STOCK #79471

• Manufacturer: Flexarm

**NO TABLE** Stock#: 79471 | Reach: 14" TO 51" | Tap capacity: #6-9/16" | Torque: 28FT/LB | Rpm: 400 | Air: 90 PSI/ 28 CFM | Tap/drill head included: YES