Used Processing in Baden-Württemberg, Germany

Trusted Seller
AZO MX 250
- Manufacturer: AZO
MIXOMAT Horizontal design, open mixing tool, 3-wing; pneumatic discharge flap.
Mannheim, Germany
Trusted Seller
Lödige Pflugscharmischer M5 GRE
- Manufacturer: Lödige
laboratory mixers Material: Edelstahl / stainless steel | Drive: 0,37 kW | Content: 5 ltr | Material: Edelstahl / stainless steel | Engine: 0,37 kW | Content: 5 ltr
Mannheim, Germany
Trusted Seller
MINOX Maschinenhandels GmbH PSM 2000
- Manufacturer: Minox
Furnishing : 2 x cleaning flaps 550 x 450 mm - Mixing tool plowshares, welded to mixer shaft - Shaft sealing on both sides with air gap device - Pneumatic motor for bottom flap - Locking magnet for the clean...
Mannheim, Germany
Trusted Seller
AMK Schräglagenmischer
- Manufacturer: AMK
mixer Material: product-contact areas in stainless steel | Content: 600 liters | Material: Edelstahl / stainless steel | Content: 600 ltr. ltr
Mannheim, Germany
Trusted Seller
AMK Schräglagenmischer
- Manufacturer: AMK
Mixer --> Mixer equipped with heating jacket. Material: product contact stainless steel | Content: 300 liters | Material: product contact stainless steel | Content: 300 ltr
Mannheim, Germany
Trusted Seller
2013 MINOX Siebtechnik GmbH MTS 2400 / 2
- Manufacturer: Minox
MINOX tumbler screening machine: - 2 x ball knock cleaning - Safety clamping screws - Lifting device, --> Machine completely grounded.
Mannheim, Germany
Trusted Seller
Unbekannt 400 x 400
- Manufacturer: Unbekannt
Rotary valve; - closed rotary valve Material: Edelstahl / stainless steel | Content: 25 ltr | - square inlet and outlet: 400 x 400 mm | - rotor width: 300 mm | - rotor diameter: 300 mm | - square inflow and outf...
Mannheim, Germany
Trusted Seller
Alpine Kolloplex-Stiftmühle Typ 630 Z / Kolloplex-pin mill type 630 Z
- Manufacturer: Alpine
Mill Drive: 55 kW | Mass: 1100 kg | Pin disc diameter on housing and door side: 630 mm; | Engine: 55 kW | Weight: 1100 kg | Pin disc diameter housing and door side: 630 mm;
Mannheim, Germany
Trusted Seller
1990 AMK Doppel-Z-Kneter
- Manufacturer: MINOX Maschinenhandels GmbH
Double Z kneader with squeezing screw Material: Edelstahl / stainless steel | Drive: 10 kW | Content: 80 ltr | Pressure inside: -1 bar | Max operating temperature: 250 ° C. | Drive for squeezing screw: 6,8 KW | K...
Mannheim, Germany
Trusted Seller
1982 Werner & Pfleiderer GK 90 N
- Manufacturer: WP
high performance internal mixer, --> Hydraulic insertion device.
Mannheim, Germany
Trusted Seller
1990 Lauda 350 S
- Manufacturer: Lauda
Heating processor, heating output: 10.5 KW; Max. filling volume: 12 ltr | Heating capacity: 10.5 kW / 50 Hz / 380 V / 3 / PE | Degree of protection: IP 54. | Permissible flow temperature: 350 ° C | Pressure vesse...
Mannheim, Germany
Trusted Seller
Netzsch RB
- Manufacturer: Netzsch
circular feeder Material: Stainless steel
Mannheim, Germany
Trusted Seller
1980 Vrieco S 10 RV 2
- Manufacturer: Vrieco
Conical screw mixer Volume: 1000 liters Volume: 1000 liters | Material: stainless steel | Drives: Wave: 6.8 KW | Material: Edelstahl / stainless steel | Content: 1000 ltr | Weight: 350 kg | Length x width x hei...
Mannheim, Germany
Trusted Seller
1987 Mozer KG TT 90/6 OB
- Manufacturer: Mozer KG
rotary kiln, used machine Type: TT 90/6 OB, two-track Drive: 7.5 KW --> Temperature up to max. 180 ° C; Weight: approx. 8.5 tons
Mannheim, Germany
Trusted Seller
Gericke GMS 1200 Multiflux-Chargenmischer
- Manufacturer: Gericke
Volume: 1200 ltr. Material: product-contact areas in stainless steel --> Mixer mounted on base frame.
Mannheim, Germany