Used Machine Tools in Scotland, United Kingdom

Kintek Axial Driven Tool

Kintek Axial Driven Tool BMT 45 – ER25 6000 RPM With Internal Coolant Suits Doosan Lynx Unused

Eppinger Preci Flex Radial Driven Tool

• Manufacturer: Eppinger

Eppinger Preci Flex Radial Driven Tool BMT 45 6000 RPM Suits Doosan Machines Unused

Eppinger Preci Flex Axial Driven Tool

• Manufacturer: Eppinger

Eppinger Preci Flex Axial Driven Tool BMT 45 6000 RPM Suits Doosan Lynx Unused

HPC Laser Model: RC2412 Laserscript Table CNC Router Lab

• Manufacturer: Laserscript

HPC Laser Model: RC2412 Laserscript Table Router Lab This item was removed from a university where it was surplus to requirement. It is in good cosmetic condition and working order. This item also includes: 1 x C...

Walter 4C Cutter Grinder

YOM: 1973

MistMaster Air Purification System

• Manufacturer: MistMaster

Code: The MistMaster is easily fitted to all CNC Machines. HSE generally recommends using LEV on all CNC machine tools as the most effective way of controlling contaminated air at source. Protect your workforce f...

300 mm Dia 4- Jaw Chuck

300 mm Dia 4- Jaw Chuck Plaine Back Bore: 70 mm

SMW Autoblock Power Chuck

SMW Autoblock Power Chuck 3 Jaw x 315mm Diameter £1750.00

3 – Point Stationary Roller Steady (unused)

3 – Point Stationary Roller Steady (unused) 10 – 150 mm Capacity Suits a Colchester VS 2500

300 mm Dia. 4 – Jaw Chuck

300 mm Dia. 4 – Jaw Chuck Camlock Fitting Bore: 70 mm

MGA Deep Hole Borer 250 x 10,000mm Capacity

• Manufacturer: Safan

MGA (Romanian) Deep Hole Boring Machine Machine had a complete retrofit in 2007 to enable CNC or manual mode operation Electric Drives Software Winstudio At the moment the machine is set to bore 3000mm length Has...

300mm Dia 4 Jaw Chuck

300mm Dia 4 Jaw Chuck 70 mm Bore Camlock Fitting (no pins)

630mm 4 – Jaw Chuck

630mm 4 – Jaw Chuck Camlock Fitting

630 mm Dia. 3 – Jaw Chuck

630 mm Dia. 3 – Jaw Chuck Plain Back Bore: 240 mm

2003 Kitchen and Walker G50 x 1600

• Manufacturer: Walker

Kitchen and Walker G50 x 1600 Radial Arm Drill Radius of arm: 1600mm | Spindle taper: MT5 | Spindle speeds: 25 – 2000 RPM | Max. drilling capacity: 75mm iron / 50mm steel