Processing » Coating & Laminating » Coating

Search By Manufacturer

Search By Country

Building Filters

3616

Used Coating

  • 1980 60" (1525 MM) WIDE

    1980 60" (1525 MM) WIDE WEAN/CCI CONTINUOUS HOT DIP GALV LINE

    • Manufacturer: Wean

    Inventory id: 20034000000 | Entry coil width max: 60 | Years when upgrades performed: 2011 | Description of upgrades: GALVANIZING SECTION BY CCI | Capacity: 250,000 | Material: GALVANIZED STEEL COILS | Type (no...

    Pittsburgh, PA
  • Trusted Seller
    ITW Gema 100/150 lb Powder

    ITW Gema 100/150 lb Powder Coating Hopper w/ 14 Gema Powder Pumps

    • Manufacturer: Gema

    ITW Gema 100/150 lb Powder Coating Hopper Includes: 2 – Level Sensors 14 – Gema Powder Pumps System will arrive cleaned, refurbished, and fully tested **We will work with you if pick up is not an option. We will ...

    Berlin, WI
  • Trusted Seller
    Wagner Powder Coating Collector/Color Module

    Wagner Powder Coating Collector/Color Module 4 Cartridge 8 Filter, 4,000 CFM cap

    • Manufacturer: Wagner

    Wagner Reclaim Powder Coating Collector/Color Module 4 Cartridge – 8 Filter Approx. 4,000 CFM capability Includes fluidizing plates and powder transfer kits We also carry spare collectors/color modules for all ot...

    Berlin, WI
  • Trusted Seller
    Complete Powder Coating Line: (1)

    Complete Powder Coating Line: (1) Nordson Powder Coating Booth, (2) TEC Bake Ovens, Jervis Webb Conveyor Line w/ Mighty Lube Automatic Lubrication System

    • Manufacturer: Nordson

    Product Description General Info Stock #: 114250196 Location: Decatur, GA Skidding Fee: Skidding Unavailable Specifications Approximate Total Footprint: 175′ L x 50′ W x 25′ H Equipped With NORDSON 524 Reclaim Po...

    Stone Mountain, GA
  • Trusted Seller
    Vector VPC-1255

    Vector VPC-1255

    • Manufacturer: Vector

    Used Vector VPC-1355 48" Coating System

    Hainesport, NJ
  • Trusted Seller
    1993 FREUND-VECTOR HC90

    1993 FREUND-VECTOR HC90

    • Manufacturer: Freund-Vector

    Used Vector Freund HC90 Hi-Coater Stainless Steel Coating Pan Manufacturer: Victor Freund Model: HC90

    Hainesport, NJ
  • Trusted Seller
    1993 FREUND-VECTOR HC-48

    1993 FREUND-VECTOR HC-48

    • Manufacturer: Freund-Vector

    Used Vector Freund HC48 Hi-Coater Stainless Steel Coating Pan Manufacturer: Vector Freund Model: HC48 Year: 1993

    Hainesport, NJ
  • Trusted Seller
    FREUND-VECTOR HC-130

    FREUND-VECTOR HC-130

    • Manufacturer: Freund-Vector

    Used Freund-Vector HI-coater stainless steel coating pan model HC-130 with intergrated plenum. (4) spray guns. Pan diameter 1300 mm. In wall design. Volume min/max 112-210 liters, batch size 157 KGS. 3 HP motor 3...

    Hainesport, NJ
  • Trusted Seller
    O'HARA LabcoatIIX

    O'HARA LabcoatIIX

    • Manufacturer: O’Hara

    Used O'Hara Technologies model Labcoat IIX 316 stainless steel coating pan system. Unit has (1) 762mm diameter perforated drum, (1) 482mm diameter drum & (1) 381mm diameter drum. Approx batch sizes range from 1kg...

    Hainesport, NJ
  • Trusted Seller
    THOMAS ACCELA-COTA 26" DIA.

    THOMAS ACCELA-COTA 26" DIA.

    • Manufacturer: Thomas

    Used Thomas Accela-Cota coater Approximately 26" diameter polished internals With removable screens Model CL36-NXR

    Hainesport, NJ
  • Trusted Seller
    Black Clawson 54" Wide

    Black Clawson 54" Wide

    • Manufacturer: Black Clawson

    Unused 54" wide Black Clawson extrusion coating station. Station consists of a primary casting roll (not installed) approximately 36" O.D. X 54" wide with a 16" O.D. X 54" rubber stripper roll mounted with air cy...

    Hainesport, NJ
  • Trusted Seller
    2011 REIFENHAUSER 112" WIDE

    2011 REIFENHAUSER 112" WIDE

    • Manufacturer: Reifenhäuser

    Used Reifenhauser 3 Meter Wide (112" Finished) 5-Layer Cast Film Extrusion Line (less extruders). New 2011. Package previously used for EVA, ULDPE, LLDPE, LDPE, with a majority of the product last run on the PP. ...

    Hainesport, NJ
  • Trusted Seller
    Valmet Pilot Coater

    Valmet Pilot Coater

    • Manufacturer: Valmet

    System In Full has never been set up. Drawings available on request. Outline of Major Components below: -Main Framing -Rolls -Unwind -Main Pull Section -IQ Scanner #1 -Electric Preheat Dryer -Web Cutter -Opti-Con...

    $2,999,900 USD
    Chicago, IL
  • Trusted Seller
    Generic Drum Style Seed Coater

    Generic Drum Style Seed Coater

    • Manufacturer: Generic

    32″ Drum 5Hp 1/8hp to run atomizer Masterflex 77300-50 polymer pump for Atomzier 240v 3ph

    $29,900 USD
    Chicago, IL
  • Trusted Seller
    QUICK R-RCGS-1-48, 48" SINGLE TOP

    QUICK R-RCGS-1-48, 48" SINGLE TOP ROLL-COATER / GLUE-SPREADER

    • Manufacturer: QUICK

    QUICK R-RCGS-1-48, 48" SINGLE TOP ROLL-COATER / GLUE-SPREADER (230/460/60/3 electrics), H-1777 General Specifications: - 1-sided roller coater (applies glue to 1 side of each panel) - 0 to 45mm (0 to 1.77") work...

    Hickory, NC
1011121314

Overview

Coating and laminating machines are used in various industries to apply a layer of material onto a substrate, improving its durability, appearance, or functionality. These machines are essential in packaging, textiles, and printing industries, where they help create products with enhanced protective and aesthetic qualities. Coating can include adhesives, protective films, or decorative layers, while laminating involves bonding multiple layers together.

FAQ

What factors should I consider when buying a coating and laminating machine?

Consider the type of materials you will be working with, the machine's speed, the coating or laminating width, and the overall quality and reliability of the machine. Additionally, look for features like easy maintenance and user-friendly controls.

How do I ensure safe shipping of a coating and laminating machine?

Make sure to use a reputable shipping company that specializes in transporting heavy machinery. Ensure the machine is properly packed, secured, and covered to prevent any damage during transit.

What maintenance is required for coating and laminating machines?

Regular maintenance includes cleaning the rollers and other contact surfaces, checking and replacing any worn-out parts, and ensuring that all mechanical components are well-lubricated. Follow the manufacturer's maintenance schedule for specific guidelines.