Building Filters

Used CTD Saws

Trusted Seller
CTD F426 Straight Cut-Off Saw 16" Blade 2700 RPM 5 Hp 3Ph Air Foot Control 90°
- Manufacturer: CTD
Used, in Good Working Condition, Tested OK. 90° cut only. Has backstop set at an angle. Blade and saw head can not turn. Working height is 32-1/4" Foot pedal controls. Air powered. Auto oiler. Setup for metal cut...
$1,800 USD
Millersburg, IN
Trusted Seller
CTD F255 Straight Cut off Chop Saw 10" Blade 3450RPM 3Hp 3Ph Aluminum Metal
- Manufacturer: CTD
Used, in Good Working Condition, Tested OK. Hand operator. Both hands have to be used to operate. Has oiler for the blades. Blade is 10". 3 hp motor. 230/460V. Wired for 480V. If this item ships as Flat Rate Frei...
$1,080 USD
Millersburg, IN
Trusted Seller
CTD F426 Straight Cut-Off Saw 16" Blade 3450 RPM 5 Hp 3Ph Air Foot Control 90°
- Manufacturer: CTD
Used, in Good Working Condition, Tested OK. 90° cut only. Working height is 32-1/4" Foot pedal controls. Air powered. Auto oiler. Setup for metal cutting. Probably aluminum. 3450 RPM. 5Hp motor. 3Ph 230/460V. Man...
$1,800 USD
Millersburg, IN
CTD DM-200
- Manufacturer: CTD
Cutting Capacity with 12” Blade, 45 Degree Miter: 2-1/2” High x 5-3/8” Wide Equipment (2) Swivel Cutting Heads (2) Inside Vertical Clamps Tripped by Foot Valve Maintained Contact Safety Control Works with Down Fe...
$3,950 USD
Charlotte, NC
Trusted Seller
CTD ABRASIVE COLD SAW #86559
- Manufacturer: CTD
NOTES: SPECIFICATIONS SUBJECT TO VERIFICATION DELIVERY: IMMEDIATE, SUBJECT TO PRIOR SALE
Ames, IA
Trusted Seller
CTD UCS222 #85533
- Manufacturer: CTD
SPECIFICATIONS: 2,800 RPM 25 strokes per minute EQUIPPED WITH: Straight cut off up cut saw Magnetic StarterTwo hand control for safety NOTES: SPECIFICATIONS SUBJECT TO VERIFICATION OPTIONAL FEATURES: 6' Extended ...
Ames, IA
Trusted Seller
CTD UCS218 #84844
- Manufacturer: CTD
SPECIFICATIONS: 2,900 RPM 25 strokes per minute EQUIPPED WITH: Straight cut off up cut saw Magnetic StarterTwo hand control for safety NOTES: SPECIFICATIONS SUBJECT TO VERIFICATION OPTIONAL FEATURES: 6' Extended ...
Ames, IA
Trusted Seller
CTD M225R #82079
- Manufacturer: CTD
SPECIFICATIONS: 90 DEGREE 2 1/2 in X 7 1/2 in EQUIPPED WITH: BALDOR INDUSTRIAL MOTOR - SN F0303212252 COOL MIST COOLANT SYSTEM GENERATOR CUTLER-HAMMER CONTROL SWITCH - 240 VOLTS - 30 AMPS - 60 HZ SPECIFICATIONS ...
Ames, IA
Trusted Seller
CTD M225R #83110
- Manufacturer: CTD
SPECIFICATIONS: NOTES: SPECIFICATIONS SUBJECT TO VERIFICATION DELIVERY: IMMEDIATE, SUBJECT TO PRIOR SALE
Ames, IA
Trusted Seller
CTD CDM60 #79162
- Manufacturer: CTD
OPTIONAL FEATURES: DELIVERY: 10-14 WEEKS Blade capacity: 16" OD (406mm); saw blades not included | Motor: 3 H.P., 3 Phase, 480 Volts | Cutting capacity: 90° Cutting: 4" (102mm) High x 10-1/2" (267mm) Wide; 45° Mi...
Ames, IA
Trusted Seller
CTD PF200M #83109
- Manufacturer: CTD
SPECIFICATIONS: NOTES: SPECIFICATIONS SUBJECT TO VERIFICATION DELIVERY: IMMEDIATE, SUBJECT TO PRIOR SALE
Ames, IA
Trusted Seller
CTD M225R #83111
- Manufacturer: CTD
SPECIFICATIONS: EQUIPPED WITH: COOLANT TANK NOTES: SPECIFICATIONS SUBJECT TO VERIFICATION DELIVERY: IMMEDIATE, SUBJECT TO PRIOR SALE
Ames, IA
Trusted Seller
CTD M225R #82054
- Manufacturer: CTD
SPECIFICATIONS: 90 DEGREE 2 1/2 in X 7 1/2 in EQUIPPED WITH: BALDOR INDUSTRIAL MOTOR - SN 50303222032 AB QUALITY START/STOP SWITCH NOTES: SPECIFICATIONS SUBJECT TO VERIFICATION DELIVERY: IMMEDIATE, SUBJECT TO VER...
Ames, IA
MITRE SAW - DOUBLE - CTD
- Manufacturer: CTD
PART: 12105 - MITRE SAW - DOUBLE - CTD Used - Good Condition 230/460V, 60 Cy, 3 Phase .09 Cubic Meters At 5.2 KG/ CM Squared Based on 10 Strokes per Minute Saw Heads Swivel From 90 Degrees-45 Degrees Toward Each-...
Chihuahua, Mexico
14" CTD MODEL N90 DUAL BLADE HIGH SPEED COLD SAW: STOCK #76406
- Manufacturer: CTD
VERTICAL FRAME & NOTCHING SAW .. YES Stock#: 76406 | Capacity toe notch: 5.5 X 5.5 X 3" DEEP | Blade diameter: 14" | Arbor: 5/8" | Speed: 3450 RPM | Floor to table: 36" | Dual palm button: YES | Electric foot ped...
Holland, OH