Used stacker

Cut to length line LDM Spotti 1500x6x25t (two levelers, flying shear)

Cut to length line LDM Spotti 1500x6x25t is used for sheet metal cutting up to 6mm metal thickness. CTL line is equipped with two levelers and flying shear LDM CUT TO LENGTH LINE 1500X6 YEAR OF CONSTRUCTION 2000 ...

LDM Spotti Cut to length line 1500x6x25t (two levelers, flying shear)

• Manufacturer: LDM Spotti

Cut to length line LDM Spotti 1500x6x25t (two levelers, flying shear) Make: LDM SPOTTI YEAR OF CONSTRUCTION 2000 TYPE 1500X6 THICKNESS 0.5 mm – 6.0 mm WIDTH 390 mm – 1500 mm SPEED 30 m/min UNCOILER CAPACIT...

SABILA 1500x4mm CTLL (Used) #4916

• Manufacturer: SABILA

€ 260.000 1500mm x 4mm / 20ton Flying shear type - speed: 14m / minute INSTALLED & UNDER POWER Line footprint: about 20m x 10m Decoiler Coil loading saddle Peeler station Leveler Flying shear Evacuation...

F&P 12mm CTL Lines (New) #3395

• Manufacturer: Floreani & Partners

New Flying Shear Cut To Length Lines 2100mm x 12mm HR, Galv., Pickled Steel CUSTOM DESIGNED -- 12m / 10 Tonne Sheet Stacker Speed max. 30m / min -- The process material -dry or oiled- is: galvanized, pickled st...

F&P 1500mm Multi-Blanking & "Combo" Lines #4915.1

• Manufacturer: Floreani & Partners

< LT15 < a) LT25 -- b) 5ton decoiler -- c) tension pad, recoiler and coil off-loading car < a) various details -- b) example of loop pit equipment -- c) a coiled strip < LT25 details --- click and then click...

cut to length

INTRODUCTION ［Uncoiling Unit ］ ［Leveler ］ ［Feeder and Shear］ ［Stacking Unit］ Cut to Length Line A cut to length line is generally used for jobs like uncoiling, straightening, measuring, cross-cutting to length an...

3x1600 OSCILLATING CUT TO LENGTH LINE

I. GENERAL SPECIFICATION 1. INPUT MATERIAL 2. PRODUCTS 3. SPEEDS 4. OTHERS II. DETAILED SPECIFICATION 1. COIL SKID Note : Coils of diameter less than 900mm should be stocked directly on the coil car 2. COIL CAR 3...

1500mm x 3mm Bonak Loop Cut to Length Line with Electromagnetic Stacker

• Manufacturer: Bonak

Coil Weight 20 tons Width 1550 millimeters Thickness 3 millimeters Manufacturer: Bonak Line Direction: Right to Left Line Speed: 120 m/min Thickness Range: 0.4mm to 3mm Coil Width Range (Entry and Exit): 150mm...

76" x .100" x 72K AUTOMATIC FEED TRAPEZOID CUT-TO-LENGTH LINE - UPGRADE 2020

• Manufacturer: AUTOMATIC FEED COMPANY

LINE OVERVIEW: THIS IS AUTOMATIC FEED COMPANY TRAPEZOID CUT TO LENGTH LINE HAD A MULTIMILLION DOLLAR CONTROLS, MOTOR AND STACKER UPGRADE IN 2020 BY AUTOMATIC FEED COMPANY THE LINE IS RUNNING AND IN OPERATION I...

72" x .125" x 64,000# BRONX MULTIBLANKING LINE

Make: Bronx / Alcos Material: CRS, Galv, Stainless, Satin Coat, Aluminum Material Width: 8" - 72" Weight: 64,000 Lb ( entry turnstile 40,000Lb) Material Thickness: .020" - .125" Coil ID: 20" - 24" Coil OD: 72" Yi...

60" (1525MM) x .078" (2.0MM) x 30,000#(15 TON) DREHER CUT TO LENGTH LINE, NEW

• Manufacturer: Dreher

Manufacturer - Dreher Year - 2007 Strip width - 8"-60" (200mm-1525mm) Coil capacity - 30,000# (15 ton) Strip thickness - .015"-.078" (.4mm-2.00mm) Flattener - 9 Rolls w/ 2 pinch rolls (11 total rolls) Shear SPM -...