Used Industrial Automation in Saxony, Germany

AUGUST STEINMEYER Ball screw spindle

Kugelgewindespindel mit Mutter, Kugelgewindetrieb AUGUST STEINMEYER GmbH 1516.523/20.63.936.1147 T5 Gewinde: Ø 62 mm Wellenstumpf: Ø 35 mm, Länge: 35 mm Gewinde: M40 x 1,5, Länge: 50 mm Wellenstück: Ø 40 mm, Läng...

GENUSTECH sheet metal centering pull-down unit

Sheet centering pull-down unit GENUSTECH PM4I2V395067T45C-052 Sensor unit: SENSTRONIC A1202R6K250111C 10 - 55 V DC approx. 0.2 m connection cable New !

SORTIMAT vibratory feeder

• Manufacturer: Sortimat

Vibratory feeder, sorting vibrator, with foot SORTIMAT SM 3 ( SM3 ) used, tested !

PAGUS trapezoidal threaded spindle

• Manufacturer: Pagus

Trapezoidal thread spindle, threaded spindle, with nut PAGUS Shaft thread: M20 x 1.0, thread length: 19 mm Shaft diameter: Ø 25 mm, length: 37 mm Shaft diameter: Ø 30 mm, length: 27 mm Shaft diameter: Ø 40 mm, le...

SLMATIC vibratory feeder

Vibratory feeder, sorting vibrator, SLmatic Type 2002 approx. 1.0 m connection cable with plug without cover and side panel ! used, tested !

MEHAG vibratory feeder

Vibratory feeder, sorting vibrator, MEHAG approx. 0.5 m connection cable with plug New !

THK ball screw with nut

Ball screw with nut, ball screw drive THK BLK2525D Thread: Ø 25 mm Shaft piece: Ø 15 mm, length: 27 mm, groove width: 5 mm Thread: M20 x 1.0, length: 14 mm, groove width: 5 mm Bearing seat: Ø 20 mm, length: 25 mm...

NSK ball screw with nut

• Manufacturer: NSK

Kugelgewindespindel mit Mutter, Kugelgewindetrieb NSK W4011-176D-C2Z 98L6-0067 Gewinde: Ø 40 mm Wellenstück: Ø 28 mm, Länge: 57 mm Gewinde: M30 x 1,5, Länge: 27 mm Lagersitz1: Ø 30 mm, Länge: 27 mm Lagersitz2: Ø ...

NSK ball screw with nut

• Manufacturer: NSK

Kugelgewindespindel mit Mutter, Kugelgewindetrieb NSK W4014-124D-C2Z 98L6-0035 Gewinde: Ø 40 mm Wellenstück: Ø 28 mm, Länge: 57 mm Gewinde: M30 x 1,5, Länge: 27 mm Lagersitz1: Ø 30 mm, Länge: 27 mm Lagersitz2: Ø ...

SCHUNK angular gripper

• Manufacturer: Schunk

Winkelgreifer, 2-Finger-Winkelgreifer SCHUNK GM 400 313098 gebraucht, geprüft !

REXROTH ball screw spindle

• Manufacturer: Bosch - Rexroth

Ball screw with nut, ball screw drive REXROTH 685 x Ø 24 mm Thread: Ø 24 mm Shaft stub: Ø 17 mm, length: 15 mm stub shaft: Ø 15 mm, length: 30 mm with ball nut: R51324014 used, tested !

SCHUNK robot module

• Manufacturer: Schunk

Robotermodul, Standard SCHUNK VERO-S NSR 160 471915 passender Spannbolzen: AT294 gebraucht, geprüft !

SCHUNK centric gripper

• Manufacturer: Schunk

Centric gripper, 3-finger gripper SCHUNK PZN+80/1 303311 2,0 - 8,0 bar used, tested !

KÄHNY vibratory feeder

Vibratory feeder, sorting vibrator KÄHNY SPECIAL MACHINES SG270L 3x electromagnet: WS 7/27 220 V 55 Hz, 156 VA approx. 0.6 m connection cable used, tested !

SMC universal gripper

Universal gripper, 2-finger parallel gripper SMC MHS2-63D 0,1 - 0,6 MPa ( 1 - 6 bar ) New !