- Trusted Seller
Bemis Case Taper
- Manufacturer: Bemis
Item is a used, Bemis, automatic case taper. This is a Packomatic, Series 1130. It is a top only taper and is approximately 8 feet long. This machine was recently removed from serviced in a beverage packaging fac...
Portland, OR - Trusted Seller
Cornell Pump
- Manufacturer: Cornell
Item is a used, Cornell, centrifugal pump having 3" X 3" flanged ports. It is powered with a 5 HP Baldor motor, 1750 RPM, 230/460 volt-3 phase. Pump is cart mounted. The pump is cast iron and was utilized in a di...
Portland, OR - Trusted Seller
Inoxpa Flexible Impeller pump
- Manufacturer: Inoxpa
Item is a previously owned, 3" flexible impeller pump. The pump was only run tested with water (otherwise unused). The pump is an Inoxpa pump model RF 50/80 (tag indicates A Line pump). It has 3" ports and is cur...
Portland, OR - Trusted Seller
NS Letina 20hl Brewhouse
Item is a new stock 20 hl brewsystem fabricated in Europe by Letina. Included are the following components: - 2000 lit - skid mounted Brewkettle - steam jacketed, insulated, stainless clad - top manhole door Laut...
Portland, OR - Trusted Seller
Krones Campac Case Packer
- Manufacturer: Krones
Item is a used Krones Campac case packer with (4) Krones PLC cabinets. Manufactured 1995. Change parts to include 12 oz long neck, 12 oz. stubby, 16 oz. and 22 oz. Max motor amps = 4.3 - Full load amps 55.0 460/3...
Portland, OR - Trusted Seller
Sandpiper Double Diaphragm pump
- Manufacturer: Sandpiper
Item is a used, Warren Rupp, Sandpiper, heavy duty, flap valve, stainless steel, double diaphragm pump w/2" ports. Pump is mounted on cart
Portland, OR - Trusted Seller
Scrap Saver Plastic Strap Chopper
Used Scrap Saver Series 100 plastic strap chopper. The machine was manufactured by TriTec Corp in Portland, Oregon. Electrics are 220/60hz/1phase. Serial Number 114. The machine is located in our Portland, Oregon...
Portland, OR - Trusted Seller
Hinds Bock 128 oz. depositor/PUMP
- Manufacturer: Hinds Bock
Item is a used, Hinds Bock 128 oz., pneumatic drive, piston depositor/pump. Machine has all S/S contact parts and 3" ports. Machine is mounted on a S/S table with casters for portability.
Portland, OR - Trusted Seller
NS Letina 3.5 bbl Steam Combi Brewhouse
Item is a new stock Letina 3.5 bbl steam combi brewhouse. This system is very similar to our Letina 7 bbl combi brewhouse and includes motorized rake, tank lights, dual stage heat ex, two pumps with vfd's, and mi...
Portland, OR - Trusted Seller
WS Packaging Label Applicator
- Manufacturer: WS Packaging
Item is a used, WS Packaging model ASD Compact label applicator set up for a #3 label wind, RH machine. The machine has been integrated with a new, S/S, variable speed conveyor, wrap station and back plate on a c...
Portland, OR - Trusted Seller
G&D 27h Multi Stage Glycol Chiller
- Manufacturer: G&D
Item is a new G&D 27h dual stage glycol chiller. -2 complete refrigeration circuits for redundancy and load control -ETL 508A listed complete control panel with single point electrical connection, breakers, start...
Portland, OR - Trusted Seller
NS BSV custom 15 bbl MLT
Item is a New Stock 15 bbl BSV MLT -15bbl Mash/ Lauter tun - Insulated, stainless clad, #4 finish, side manway door for grain out, top manway door. Integrated false bottom (removable), tank light, four legs with ...
Portland, OR - Trusted Seller
new stock - 40cm x 40cm filter (30 plates)
Item is a new stock plate and frame filter. This is a 40cm x 40 cm plate and frame filter with 30, black noryl plates. This is a new stock machine fabricated in Europe. Machine includes valves, sight glass and sa...
Portland, OR - Trusted Seller
Weil McLain EGH85 Steam Boiler - New Stock
- Manufacturer: Weil-McLain
New Stock - Item is a Weil McLain model EGH85 gas fired low pressure steam boiler. Key Features- -Medium capacity cast iron commercial gas boiler -Combination Gas Valve and Regulator -Non-Linting Pilot Burner -Fa...
Portland, OR - Trusted Seller
Elliott HMT Mini Case Sealer
- Manufacturer: Elliott
Item is a used, Elliott, hot melt, top only, automatic case sealer. It is a model HMT Mini 79-10-10. It is equipped with a Nordson ProBlue glue system. Case size range is 8"x18" L; 6"x16" W; 3"x16" H. Machine is ...
Portland, OR