Used Processing in Illinois, USA

YOUNG 6INHC AIRLOCK / DIVERTER 17428

• Manufacturer: Young

Young model 6INHC 6″ airlock / diverter combination unit, .5 HP 1750 RPM motor driving 25:1 ratio gearbox on airlock for a 70 RPM speed, 6″ ID inlet with 11″ OD flanged mount, diverter with two 6″ ID outlets

CONAIR/GATTO HS-2-4 PROFILE SAW 4715

• Manufacturer: Conair

CONAIR/GATTO MODEL HS-2-4 PROFILE SAW, 2 HP 480 VOLTS 3 PHASE, 10″ HIGH SPEED STEEL BLADE, PNEUMATIC HOLD-DOWNS, TUBING CAPACITY 0 – 2 3/8″ OR UP TO PROFILES 2″ X 4″ WIDE, 10″ TABLE TRAVEL, DIMENSIONS ARE 43 3/4″...

YOUNG INDUSTRIES 6-IN 6″ AIRLOCK 14295

• Manufacturer: Young Industries

Young Industries model 6-IN airlock, S/N HG-8687, powered by a 1/2 HP 1780 RPM motor directly driving the gearbox chain sprocket steel vanes, square bolt on flange mount

TRIA TRAINO D210 FEED ROLLS 14597

• Manufacturer: Tria

Tria model Traino D210 feed rolls. S/N 33202959. Code 886.000.161, 2003 model year. 8.25″ diameter x 56″ wide knurled steel rolls powered by a 3.7 kW (5HP) 208-230V/460V 1,725 RPM motor through a gearbox. Pneumat...

PADDLE FEED ROLL 10249

Used paddle feed roll. 5″ diameter x 24″ wide 110V/1ph/60Hz 1/4HP motor air clutch chain and sprocket drive no controller.

VORTEX SA06-RS.0007 PNEUMATIC SLIDE GATE 12497

• Manufacturer: Vortex

Vortex model SA06-RS.0007, pneumatic slide gate, S/N 38478-004. 6″ square gate.

CONAIR EXF-450 3 AXIS PICKER 12243

• Manufacturer: Conair

Conair model EXF-450, 3 axis picker. S/N 011761. Job no. 101340, manufactured in April 1995. Pneumatic operation controller is not included.

CONAIR POWER FILL PUMP STATION 15005

• Manufacturer: Conair

Conair power fill pump station model B779901W, S/N B41865, 3 HP (1.75 kW) 480V/3ph/60Hz operation. The pump station receivers in the photo are not included.

NOVATEC 2 CUBIC FOOT VACUUM 18735

• Manufacturer: Novatec

Novatec model 04338-20 vacuum receiver. S/N 12-784. Manufactured 11/99. Approximate 2 cubic foot capacity. 16″ OD x 22″ chamber plus bottom taper. Includes flapper valve. 2″ OD line size.

SMOOT 9″ ROTARY AIRLOCK 19010

Smoot 9″ rotary airlock. S/N 10292. 9″ x 9″ throat opening with 11″ x 11″ bolt flange. Powered by a 3/4 HP 208-230/460-volt motor thru a gearbox. Has 5″ OD blow-thru mounted on under-side discharge.2 Available

PRODUCT DESIGN & DEVELOPMENT 2 18703

One (1) used Product Design and Development two lane profile notcher. Air actuated. 5″ x 2 ¼” cylinder. Two post design. Stand mounted.

TECHNO-PLAST PULLER / TRAVELING SAW 18683

• Manufacturer: Techno-Plast

Used Techno-Plast model TRZ-240SA/300 Puller/Traveling Saw Combination. S/N 7010750. 9 1/4″ wide cleats with 96″ belt contact length. Chain driven with dual pneumatic gap adjustment. Air traveling with nominal 14...

GREINER 80/9 PULLER / SAW 18515

• Manufacturer: Greiner

Used Greiner model 80/9 Puller / Traveling Saw Combination. S/N R9804350. Utilizes nominal 9 1/4″ wide cleats with 108″ belt contact length. Chain driven with dual pneumatic gap adjustment. Air traveling saw with...

GOODMAN CUTTER / PULLER 18397

One (1) used Goodman puller / cutter combination. S/N 6498. Nip roll puller has 3.5″ wide x 4″ diameter rolls. Puller driven by approximately a 3 HP A/C motor. On demand cutter can handle up to a 3″ OD bushing. C...

PAIR MEYER 5.5″ ID AIRLOCKS 18432

• Manufacturer: Meyer

Pair of incomplete William J. Meyer HDX series 5.5″ airlocks. S/N 291105-010B and 292545-010A. Both have 11″ OD bolt flange mount with 5.5″ OD airlock inlet and outlet. Cast iron airlock housing with replaceable ...

Nabertherm LF60 Industrial Furnaces & Oven

• Manufacturer: Nabertherm
• Model: LF60

Good condition Nabertherm LF60 Industrial Furnaces & Ovens manufactured in 2017. Located in USA and other countries. Click request price for more information.