Used Crown Wire Machinery in Jiangsu, China

Crown Coaxial Wire Stripping Machine
- Manufacturer: Crown
Processing cable diameter: 0.64-4.0mm | Wire cutting capacity: 22mm-9999mm | Stripping length: right end max200mm, left end max45mm | Cutting depth unit: 0.01mm | Maximum number of stripping layers: 6 layers | W...
Suzhou, China
Crown Ultrasonic Wire Welder Machine
- Manufacturer: Crown
Control method: PLC | Input voltage: 220V | Maximum output power: 8000W | Working frequency: 20HZ | Welding time range: 0.5S - 2S | Welding area range: within 80 mm² | Operating humidity: 0 - 40° | Working air p...
Suzhou, China
Crown Wire Shielding Cutting Machine
- Manufacturer: Crown
Cable: 4-70mm (shielding layer outer diameter 3-16mm) | Shielding net cut-off length: 2-70mm (with reserved length) 2-110mm (without reserved length) (can be customized) | Air control method: pneumatic control |...
Suzhou, China
Crown Wire Coiler Pan
- Manufacturer: Crown
Function: Wire winding and coiling | Control mode: Main machine follow-up control (optional: winder can be used independently) | Winding disk diameter: 500mm | Coiling diameter: 200-480mm | Coiling speed: 1.5m/s...
Suzhou, China
Crown Dual Wire Stripper and Twister
- Manufacturer: Crown
Dimensions: 420mm×345mm×297mm | Weight: 28KG | Display method: 4.3-inch touch screen | Power supply: AC175V－250≤50/60HZ | Power: 120W-220W | Cutting length: 0.1mm-99999.9mm | Stripping length: side A: 0.1-50mm ...
Suzhou, China
Crown Ultrasonic Wire to Connector Splicer Machine
- Manufacturer: Crown
Input voltage: 220V | Maximum output power: 5000W | Working frequency: 20KHZ | Welding time: 0.5S-2S | Welding area: ＜ 30mm² | Operating humidity: 0-40° | Working air pressure: 0.2-0.8MPa | Ambient temperature: ...
Suzhou, China
Crown Machine to Crimp Two Wires into One Tubular Terminal
- Manufacturer: Crown
Production capacity: approximately 2.5 seconds per cycle | Applicable wire diameter: 0.5 mm² - 4 mm² | Processing length: outer sheath length: approximately 40 mm | Peeling length: 5 mm - 17 mm | Blade value er...
Suzhou, China
Crown 2D Wire Forming Machine
- Manufacturer: Crown
Total power: 7.5KW | Number of reducers: 3 | Wire feeding servo power: 3.0KW | Cut off servo power: 1.5KW | Bending servo power: 3.0KW | Processing wire diameter: 2-6mm | Number of motors: 3 | Air pump required:...
Suzhou, China
Crown Automatic Wire Coiling Machine
- Manufacturer: Crown
Function: wire take - up and coiling | Control method: host-following control | Diameter of take-up reel: 1000mm | Coiling diameter: 200 - 960mm | Wire reel load - bearing: 30KG | Coiling speed: 2.5M/s | Driving...
Suzhou, China
Crown Active Wire Prefeeder Machine
- Manufacturer: Crown
Driving method: Three-phase motor + reducer | Rated rotational speed: 1450 | Maximum rotational speed: 2200 | Outer diameter of reel: 400 - 1000 | Through - hole diameter: No Limit | Height (width) of reel: With...
Suzhou, China
Crown Five-wire Laser Peeling Machine
- Manufacturer: Crown
Wire gauge: 16 - 30/AWG | Cutting length: 55 - 950mm | Stripping length: 12 - 14mm | Display method: Industrial Computer | Dimensions: L2080mm×W930mm×H1830mm | Power: Approx. 3KW | Weight: Approx. 400KG
Suzhou, China
Crown Wire Both Ends Laser Stripping Machine
- Manufacturer: Crown
Power supply: AC220V/50HZ | Dimensions: L753 x W1189 x H1653mm (excluding protrusions) | Weight: Approximately 180kg | Peeling length: Front end: 0 - 300mm Rear end: 0 - 90mm | Guiding pipe control method: ...
Suzhou, China
Crown Ultrasonic Multiple Wire Splicer Machine
- Manufacturer: Crown
Input voltage: 220V | Maximum output power: 4200W | Working frequency: 20HZ | Welding time range: 0.5S-2S | Welding area range: 3x18mm | Operating humidity: 0-40° | Working air pressure: 0.2-0.8MPa | Ambient tem...
Suzhou, China
Crown Ultrasonic Wire Welder Splicer Machine
- Manufacturer: Crown
Control mode: single chip microcomputer | Input voltage: 220V | Maximum output power: 3000W | Working frequency: 20HZ | Welding time range: 0.5S-2S | Welding area range: 0.5-28mm² | Operating humidity: 0-40° | W...
Suzhou, China
Crown 5-wire Crimping and Tinning Machine
- Manufacturer: Crown
Wire range: 18AWG-32AWG (customizable if beyond the range) | Cut length: 40-1000mm (customizable if beyond the range) | Stripping length: Front end 0-6mm (customizable if beyond the range) Rear end: 0-12mm ...
Suzhou, China