- Trusted Seller

Crown electric kettle 40 gal model elt-40 1/2 jaketed #10527
- Manufacturer: Crown
40 gal Crown Electric Kettle Model ELT-40 1/2 Jaketed PSI 50, 298 F. S# 43252-1R-0376, 208 volts. 3ph.
Québec City, Canada - Trusted Seller

Crown tilting kettle s/s model klt-60g gas #10522
Crown Tilting Kettle S/S Model KLT-60G Gas MAWP 50 PSI AT 298F. MDMT32F, at 50 PSI, YR 2011,
Québec City, Canada - Trusted Seller

Crown kettle klt-60g all in stainless steel #33121
- Manufacturer: Crown
Crown Tilt Kettle Model KLT - 60G, Serial Number 120911S5016-52, all in heavy 304 stainless steel body contsruction with interior liner in 316 stainless steel, on legs, 2 inch outletwith valve. Maximum pressure o...
Québec City, Canada Crown PCC-170 Supercardioid Condensor Boundary Microphone Open Box
- Manufacturer: Crown
Tested working microphones look to have never been used all have inventory numbers on the bottom. All have manuals except one. None come with mini XLR to full size XLR
$115 USDFayette, AL- Trusted Seller
CROWN IRON WORKS 374 Sq. Ft
- Manufacturer: Crown
Unused from new Crown Iron Works approximately 374 square foot (35 square meter) horizontal condenser. Has (119) 3/4" (19.05 mm) diameter X 16' (4877 mm) long 304L stainless steel tubes rated -15/75 psi (-1.03/5....
Hainesport, NJ - Trusted Seller
CROWN IRON WORKS 1950 Sq. Foot
- Manufacturer: Crown
Unused from new Crown Iron Works approximately 1950 square foot (181 square meter) stripper condenser. Has (414) 3/4" (19.05 mm) diameter X 24' (7315 mm) long 304 stainless steel tubes rated 45 psi (3.1 bar). Has...
Hainesport, NJ - Trusted Seller
CROWN IRON WORKS 5013 Sq. Foot
- Manufacturer: Crown
Unused from new Crown Iron Works approximately 5013 square foot (466 square meter) 1st stage evaporator. 304 stainless steel tubes has (1064) 3/4" (19.05 mm) diameter X 24' (7315 mm) long 304 stainless steel tube...
Hainesport, NJ - Trusted Seller
CROWN IRON WORKS 9498 Sq. Foot
- Manufacturer: Crown
Unused from new Crown Iron Works approximately 9498 square foot (882 square meter) 304 stainless steel horizontal evaporator condenser. Has (2016) 3/4" (19.05 mm) diameter X 24' (7315 mm) long 304 stainless steel...
Hainesport, NJ - Trusted Seller
CROWN IRON WORKS 5088 Sq. Foot
- Manufacturer: Crown
Unused from new Crown Iron Works desolvent toaster condenser. Approximately 5088 square foot (473 square meter) heat transfer area. Has (1080) 3/4" (19.05 mm) diameter X 24' (7315 mm) long 304 stainless steel tub...
Hainesport, NJ 
PUMP, CENTRIFUGAL, 3 X 3 X 7, CROWN MDL.B30-7X, SELF PRIMING, 100GPM, 60'HD, DI, 3HP, HORIZONTAL
- Manufacturer: Crown
PUMP, CENTRIFUGAL, 3 X 3 X 7, CROWN MDL.B30-7X, SELF PRIMING, 100GPM, 60'HD, DI, 3HP, HORIZONTAL Centerline supported casing. Single mechanical seal or similar, Carbon or tungsten face. Designed for a Fulton ther...
Alvin, TX- Trusted Seller

Crown Food Service Equip. DLT-20
- Manufacturer: Crown
All stainless steel steam jacketed kettle. The kettle is 21" diameter x 18" deep. With a lid. It has a hand crank tilt that's when fully tilted is 11.75" from the floor. The kettle is on a stainless frame with le...
Barrie, Canada - Trusted Seller

CROWN EL-60 - 60 GAL (227 L) Electric steam kettle
- Manufacturer: Crown
- Model: EL-60
The Crown Steam EL-60 Electric Kettle is the perfect equipment for preparing soup, chili, pasta, and stew. This self-generating, stationary kettle with 60 Gallon capacity makes it spacious enough to cook large ba...
- Trusted Seller

12" Single Screw Crown/CDL Dump Extruder, Model RPU2E400, 10:1 L/D Ratio
- Manufacturer: Crown
30" L x 12" W Water Cooled Feed Throat With Pneumatic Ram Stuffer Water Cooled Screw, 4 Downstream Zones, Non-Vented Closed Loop System With Pump, Tank, And Heat Exchanger Approximate 48" Centerline Height 500 V...
United States - Trusted Seller

2004 Crown Iron Works .
- Manufacturer: Crown
Crown Iron Works condenser, NEW, Old Stock. Surface area 5088 sq ft (473 sq m) with (1080) 3/4 inch (19.05 mm) diameter x 24 ft (7315 mm) long ss304 stainless steel tubes rated 45 psi (3.1 bar) design pressure. C...
United States - Trusted Seller

12" Single Screw Crown/CDL Dump Extruder, Model RPU2E400, 10:1 L/D Ratio
- Manufacturer: Crown
30" L x 12" W Water Cooled Feed Throat With Pneumatic Ram Stuffer Water Cooled Screw, 4 Downstream Zones, Non-Vented Closed Loop System With Pump, Tank, And Heat Exchanger Approximate 48" Centerline Height 500 V...
United States

