Used Crown Machine Tools in Jiangsu, China

Crown Fully-auto Flat Cable Two Ends Crimping Machine
- Manufacturer: Crown
Good at crimping small terminals Good at crimping super soft flat cables Good at crimping long flat cables Innovative design without wire slitting blade
Suzhou, China
Crown Automatic Cable One End Housing Inserting and Tinning Machine
- Manufacturer: Crown
Wire size: AWG#20 - #30（Wire diameter below 2.5mm） | Wire color: 10 colors（Optional 2～10） | Cutting length: 50 mm - 1000 mm (set unit as 0.1mm） | Cutting tolerance: Tolerance 0.1 mm + | Stripping length: 1.0mm-8...
Suzhou, China
Crown Double-end Crimping and Housing Connector Assembly Machine
- Manufacturer: Crown
Power supply: AC 220v | Maximum power: 4.8KW | Air pressure: 0.4~0.6 MPa | Weight: 800KG | Dimensions: 2400L*1500W*1850H (excluding wire feeder and vibrating plate part) | Function: A end: stripping, crimping, h...
Suzhou, China
Crown Wire Cut Strip Crimp Seal Machine on Two Ends
- Manufacturer: Crown
Power supply: AC220V/50/60HZ(110V/60Hz optional) | Capacity: 3000 pieces/hour(Length within 100mm) | Wire size: AWG#28-AWG#16 | Cutting length: 50-9999mm | Cutting tolerance: within 1mm + cutting length x 0.2% |...
Suzhou, China
Crown Cable Double-ended Rubber Seals Crimping Machine
- Manufacturer: Crown
Max. capacity: 4000 pieces/hour (L=100mm, seals insertion at both ends) | Applicable wire diameter: 0.2-2.5mm² (3.0mm² or above optional) | Cutting length: 35-9999mm (99999 optional) | Cutting precision: (0.2+0....
Suzhou, China
Crown Automatic O-Ring Seal Ring Assembly Machine
- Manufacturer: Crown
Speed: 1piece/time, ＜1.5 seconds / piece | Feeding method: automatic feeding of O-rings, manual feeding of pipe fittings | Total air source requirements: constant pressure ≥ 0.8MPa and test pressure +0.15MPa (dr...
Suzhou, China
Crown Cable Labeling System
- Manufacturer: Crown
Adopt PLC control system to make the whole machine run stably and at high speed; Touch man-machine interface, simple and intuitive operation, complete functions; Use famous brand electrical components...
Suzhou, China
Crown Pneumatic Wire Ferrules Terminal Crimping Machine
- Manufacturer: Crown
Different terminals can be crimped with different crimping modules Normal or pressure-protected foot switch is available Equipped with a pressure regulator to ensure precise crimping Lightweight...
Suzhou, China
Crown Pneumatic Big Wire Cutting-off Machine
- Manufacturer: Crown
Use high-power cylinder to provide strong output force for cutting The large-capacity oil-water classifier makes the cylinder run stably and not easily damaged Using tungsten steel blade, sharp and du...
Suzhou, China
Crown High-efficiency Multi-Roll Tape Cutting Machine
- Manufacturer: Crown
Easy change out of tape rolls Sturdy metal unit Keep your tape rolls organized and ready to use
Suzhou, China
Crown Automatic Wire Coil Winding and Cable Tie Tying Machine
- Manufacturer: Crown
This semi automatic wire coil winding and cable tie tying machine is suitable for winding and tying USB cable, headphone cable, AC/DC power cable, network cable, telephone cable, audio/video cable, HDMI cable, wa...
Suzhou, China
Crown 1-16mm2 Wire Cutting and Stripping Machine
- Manufacturer: Crown
Function: fully automatic wire cutting and stripping Applicable wire sizes: 1-16 square mm Strip outer sheath of single conductor cables Drive mode: 16-wheel drive (silent hybrid stepper motor, ...
Suzhou, China
Crown Pneumatic Large Gauge Cable Stripping Machine
- Manufacturer: Crown
This machine is mainly used for stripping large gage cables. It is a special equipment for processing of new energy DC cables; High precision rotating and strong stripping; Maximum wire diameter 25mm,...
Suzhou, China
Crown Pull Force Tester
- Manufacturer: Crown
Function: peak force, non-destructive test, UL test values for pull out. Motor driven, color touch screen operation, automatic measurement and display of the tension value, simple operation and accurate mea...
Suzhou, China
Crown New Energy Connector Nuts Screwing Machine
- Manufacturer: Crown
Scope of application: φ5-30mm | Torque range: 10-300% | Torque frequency: 10-80000hz | Power: 200-240V, 50Hz/60Hz, 400W | Capacity: 15-20pcs/min | Dimensions: 550 x 320 x 350 mm | Weight: 80 kg
Suzhou, China