
160 70K Chain for Drill Rig
- Manufacturer: Aftermarket
New 160 70K Chain for Drill Rig For 70,000 lbs of pullback Chains Set of 2 Chains is recommended to ship together 8 Sets in stock as of 3/2021 Located in Mifflinburg, PA yard USA
Mifflinburg, PA
1985 Ingersoll-Rand TH60 Drill Rig
- Manufacturer: Ingersoll Rand
- Model: TH-60
- 1985 Ingersoll-Rand TH60 Drill Rig - S/N: 0848 - Mounted on an International Paystar 5000 Truck - VIN #2HTTGDWT6FCA161151985 - Detroit 8V71 diesel engine (6673+ hours) - IR 750 cfm / 250 psi Air Compressor (685...
Mifflinburg, PA
6" Chisel Bit for Cable Tool Drill Rig
- Manufacturer: Aftermarket
- 6" Chisel Bit for Cable Tool Drill Rig - Used - 2-1/4" x 3-1/4" API pin for water well rig. - Presumably American manufactured with carbon and/or alloy steels, but unsure if this is Acme, Spang, Gill Rock Drill...
Mifflinburg, PA
2004 Atlas Copco T4 Drill Rig
- Manufacturer: Atlas-Copco
Pending Sale 2004 Atlas Copco T4 Drill Rig – SN 6867 Specifications: - Hours: 6,128 Hours On Meter - Cummins QSK19760 Diesel Deck Engine - rated 760HP – Only 5 Hours Since Rebuild (Completed in 2023) - IR HR2....
Mifflinburg, PA
6" Chisel Bit for Cable Tool Drill Rig
- Manufacturer: Aftermarket
- 6" Chisel Bit for Cable Tool Drill Rig - 2-1/4" x 3-1/4" API pin for water well rig. - Used - Presumably American manufactured with carbon and/or alloy steels, but unsure if this is Acme, Spang, Gill Rock Drill...
Mifflinburg, PA
Driltech Filter Housing for a Driltech or Similar Drill Rig
- Manufacturer: Driltech
Used Filter Housing for a Driltech or Similar Drill Rig Located in Mifflinburg, PA USA
Mifflinburg, PA
1991 Mobile B61 HDX Drill Rig
- Manufacturer: Mobile
- 1991 Mobile B-61 HDX Drill Rig - S/N: 91009 - PULLMASTER Main & RKI Secondary Winches - 30'H Hydraulic Raised Stiff Mast - Integrated Table - Hydraulic Tong Assembly - 2005 CUMMINS 3.9L Diesel Engine - HPU - MO...
Mifflinburg, PA
Combination Socket Fishing Tool for Cable Well Drill Rig.
- Manufacturer: Aftermarket
- Combination Socket Fishing Tool for Cable Well Drill Rig. - Over 8" Diameter. - No Slips Included. - Wrench Squares. - Approximately 34" length. - Tool Joint Connection: 2-1/4" x 3-1/4" API Pin - (Can Be Rethre...
Mifflinburg, PA
Ingersoll-Rand Tower/Mast for IR TH60/T3W Drill Rig
- Manufacturer: Ingersoll Rand
- Model: TH-60
- Tower/Mast for Ingersoll-Rand TH60/T3W Drill Rig - Includes Tower - Feed Cylinder - Jib Boom Cylinders - Parts/Components as pictured - No top head (has been removed) - Tower was bent and being sold "as is", fo...
Mifflinburg, PA
1976 Ingersoll-Rand Cyclone TH60 Drill Rig
- Manufacturer: Ingersoll Rand
- Model: TH-60
- Mid-1976 Ingersoll-Rand / Cyclone TH60 Drill Rig - Mounted on a newer 2012 International Workstar 7600 Truck - VIN: IHTGSSHT5CJ647725 - MaxxForce Rated 425hp Diesel Engine - 10 Speed Eaton transmission - Centri...
Mifflinburg, PA
2014 Atlas Copco T45-11 Drill Rig
- Manufacturer: Atlas-Copco
- Model: T45-11
Pending Sale - 2014 Atlas Copco T45- 11 Drill Rig - S/N AVO14A1033/8992 0090 - 1 Flexroc With Smart Roc Software Installed - 13,120 Hours - 2560 Drifter - T- 51 Rods - Located in Mifflinburg, PA USA
Mifflinburg, PA
1974 Ardco K10 4X4 Drill Rig
- Manufacturer: Ardco
PENDING SALE - 1974 Ardco K10 4X4 Drill Rig - 4X4 Carrier S/N: K420 - Detroit 4-53T diesel engine (locked up does not run) - Eaton FS5005A 5 speed transmission - Winch on front - Drill is a predecessor to the C1...
Mifflinburg, PA
Spang & Company Latch Jack Fishing Tool for Cable Well Drill Rig.
- Manufacturer: Spang & Company
- Spang Latch Jack Fishing Tool for Cable Well Drill Rig. - Ideal For Retrieving Lost Bailers, Lost Sand Pumps, Or Similar in Boreholes Over 6" Diameter. - 4-1/4" Wrench Square. - Approximately 62" Length. - Tool...
Mifflinburg, PA
2008 Atlas Copco Roc L8-30 Drill Rig
- Manufacturer: Atlas-Copco
- Model: ROC L8-30
- 2008 Atlas Copco Roc L8-30 Crawler Drill Rig - S/N: AVO08A1240 - Set up for 4” drill pipe - 4.5" - 8" DTH Class - CAT C15 Diesel Engine - Rebuilt on 3-21-20 at 15,132 hours - Current frame hours 17,863 Rotary h...
Mifflinburg, PA
Spang & Company Center Rope Spear for Cable Tool Drill Rig
- Manufacturer: Spang & Company
- Center Rope Spear for Cable Tool Drill Rig - Ideal For Fishing Wire Rope in Boreholes Over 5-1/2” Diameter - Length 72” - Tool Joint Connection: 2-1/4” x 3-1/4” API Pin - (Can Be Rethreaded to Another Size Loca...
Mifflinburg, PA
Comacchio MC-F04.1 Drilling Rig
- Manufacturer: Comacchio
- Model: MC-F04.1
Good condition Comacchio MC-F04.1 Drilling Rigs manufactured in 2007. Located in United Kingdom and other countries. Click request price for more information.
United Kingdom

