Used Drilling Rigs

SOOSAN JD1400E

• Manufacturer: Soosan

2017 Year – Junjin Soosan JD1400E serial # 67 – Rock Commander Unit has approx.. 6,552 total hours & 2,123 percussion hours.YH135 Drifter, 400 CFM @ 150 PSI onboard GHH-Rand Air Compressor, Rod Changer, Dust Coll...

1985 CME 45B AUGER DRILL RIG #2347T

(Rig has been modified to a CME 55), manufactured 1985, new diesel deck engine (less than 200 hours), mounted on rubber tire articulating ATV with gas engine, no angle capability Price: $82,500

1999 CME 45C AUGER DRILL RIG #3298Tc

Manufactured 1999, 3 cyl 57 hp Duetz air cooled diesel engine, 2 winches, cathead, 140 # CME auto hammer, Moyno 3L6 pump, slide base, 300 gal water tank, front winch, toolbox mounted on 1995 Markooka MST 1100, 24...

1991 MOBILE B-57 AUGER DRILL RIG #8195T

Manufactured 1991, gas deck engine, 250 gal water tank, cathead, in/out and side to side slide base, no pump, no autohammer, mounted on 1995 Ford F700 single axle truck (not 4 x 4) with gas engine Price: $39,500

2014 Atlas Copco PowerROC T50

• Manufacturer: Atlas-Copco
• Model: POWERROC T50

– CAT C9 Tier4 – 492CFM/152PSI Air – COP 3060ME Drifter – Setup for GT60 Current Hours: 6,329 engine & Approx. 2,215 percussion. Recent Repairs: Last Drifter Service was @ 5,596 engine hrs & 1,966 percussion hrs ...

FAILING 1500 DRILL RIG #2826T

• Model: 1500
• Gearbox type: Manual
• Mast Height: 0.9398 meter

FAILING 1500 DRILL RIG

2000 GARDNER-DENVER 400

• Manufacturer: Gardner Denver

3.5” – 4.5” Inch Class CAT Diesel Engine Cab & Rod Changer – Hydraulic Drill 4600 total hours New Hydraulic Rotation Pump

2013 FURUKAWA DCR20

• Manufacturer: Furukawa
• Model: DCR20
• Horsepower: 439.8552451407689 horsepower
• Machine weight: 20,100 kilogram

DTH Class CAT C-13 Tier III Diesel Set Up For 4 Drill Pipe Joystick Operated Rod Changer Carousel Water-Injection System Cyclone Dust Collector

2005 REEDRILL 345

• Manufacturer: Reedrill

3.5 – 4.5 Inch Class HPR1H-ATW Hammer CAT C9 Diesel Engine Low Hours Set up for T45 and long feed for 20′ drill steel Excellent Condition

1978 GARDNER DENVER 15W DRILL RIG #4863T

• Manufacturer: Gardner Denver

Beefed up to a GD 2000, manufactured 1978, 750/300 air compressor, 5 x 8 Gardner Denver 172XX high pressure piston mud pump (new hose, sprockets, chains), heavy duty mast 48’ mast x 80,000 lb pullback, 10” retrac...

1997 INGERSOLL-RAND DMLSP

• Manufacturer: Ingersoll Rand

DTH Class Single Pass Drill Rig – 55’ft – 60’ft Mast Cummins QSK19 Diesel Engine High Pressure – IR HR2.5 – 1050 CFM @ 350 PSI Onboard Air Compressor CAT 330L&S Undercarriage

2007 ATLAS COPCO CM780D

• Manufacturer: Atlas-Copco
• Model: CM 780D
• Horsepower: 439.8552451407689 horsepower
• Drilling depth: 31 meter

DTH Class C-13 Cat Power 3.5” Drill Pipe 8961 frame/engine hours New Bean Pump-water injection New hose chain in 2016 New compressor oil cooler New windshield to be installed

2007 INGERSOLL-RAND CM780D

• Manufacturer: Ingersoll Rand
• Model: CM-780D
• Horsepower: 475 horsepower
• Drilling depth: 31.3944 meter

DTH Class C-13 Cat Power 3.5” Drill Pipe 8961 frame/engine hours New Bean Pump-water injection New hose chain in 2016 New compressor oil cooler New windshield to be installed

2007 INGERSOLL-RAND ECM720

• Manufacturer: Ingersoll Rand
• Model: ECM-720
• Horsepower: 385 horsepower
• Drilling depth: 30 meter

4.5” – 5.5” Inch Class CAT C11 Diesel Engine HC200A Drifter set up for GT60 Rods Caterpillar C11 Diesel Engine Montabert HC200A drifter. Recent new hydraulic Pump Aprox. 11800 total frame hours Unit is set up for...

ARDCO 4 X BUGGY DRILL RIG AND TRANSEQUIP WATER #4038Ta

Rig has Cummins 5.9 diesel engine Price: $115,000 for both

Ingersoll Rand ECM-720 Drilling Rig

• Manufacturer: Ingersoll Rand
• Model: ECM-720

Good condition Ingersoll Rand ECM-720 Drilling Rigs manufactured in 2003. Located in USA and other countries. Click request price for more information.