Machine Tools » Crank Presses » Czech Republic

Building Filters

15

Used Crank Presses in Czech Republic

  • Hot forging press line Inver

    Hot forging press line Inver Press Lecco - 100 ton

    • Manufacturer: Inver-Press

    Hot forging press line Inver Press Lecco - 100 ton Forging line 100 ton Forging press 100 ton Hot forging line

    Czechia
  • Trusted Seller
    2019 ŠMERAL Trnava LKT 250

    2019 ŠMERAL Trnava LKT 250 D

    • Manufacturer: Šmeral Brno
    • Model: LKT 250

    In 2019, the LKT 250D press underwent a complete overhaul, only the frame of the machine remained, everything else is new and documented. Only a few tens of hours have been worked on the machine after GO. The mac...

    Prague, Czech Republic
  • Trusted Seller
    1972 KRUPP PDqV 4-500

    1972 KRUPP PDqV 4-500

    • Manufacturer: Krupp

    After the GO in 2008 the press was in operation for a maximum of 100 hours. In the years 1972-208 the press was in operation for two shifts.

    Brno, Czech Republic
  • Trusted Seller
    1987 SMERAL LDC 250

    1987 SMERAL LDC 250

    • Manufacturer: Šmeral Brno
    • Model: LDC 250

    Pressing force: 245 t | Maximum number of strokes: 38 1/min | Adjusting the ram: 120 mm | Ram stroke: 200 mm | Machine weight: 29800 kg

    Brno, Czech Republic
  • Trusted Seller
    1963 METALPRESS LKT 250

    1963 METALPRESS LKT 250

    • Manufacturer: Metalpres

    Ram stroke: 120 mm | Adjusting the ram: 100 mm | Machine weight: 2700 kg

    Brno, Czech Republic
  • Trusted Seller
    1956 ŠMERAL LKO 315

    1956 ŠMERAL LKO 315

    • Manufacturer: Šmeral Brno
    • Model: LKO 315

    Characteristic: Lenght: 3600 mm Width: 1750 mm Height: 4600 mm Ram stroke: 180 mm Number of strokes: 60 / min Weight: 17 000 kg Engine power: 25 kW Voltage: 380 V Frequency of oscillation: 50 Hz

    Brno, Czech Republic
  • Trusted Seller
    1987 ERFURT PKnT 315

    1987 ERFURT PKnT 315

    • Manufacturer: Erfurt
    • Model: PKNT 315

    Pressing force: 315 t | Length of the table: 1400 mm | Width of the table: 1400 mm | Maximum number of strokes: 15 1/min | Ram stroke: 670 mm

    Brno, Czech Republic
  • Trusted Seller
    1987 ERFURT PKnT 160

    1987 ERFURT PKnT 160

    • Manufacturer: Erfurt

    Pressing force: 160 t | Maximum number of strokes: 15 1/min | Power demand: 21 kW | Ram stroke: 265-425 mm | Adjusting the ram: 130 mm | Machine weight: 21000 kg

    Brno, Czech Republic
  • Trusted Seller
    1974 METALPRESS LKT 250

    1974 METALPRESS LKT 250

    • Manufacturer: Metalpres

    controlled electronically Pressing force: 250 t | Length of the table: 1150 mm | Width of the upper working table: 1580 mm | Maximum number of strokes: 7-25 1/min | Ram stroke: 250 mm | Adjusting the ram: 100 mm ...

    Brno, Czech Republic
  • Trusted Seller
    1977 SMERAL LKT 250

    1977 SMERAL LKT 250

    • Manufacturer: Šmeral Brno
    • Model: LKT 250

    Machine dimensions: 2800 x 1240 x 4450 mm Length of the table: 1575 mm | Width of the table: 1150 mm | Ram: 1380 x 850 mm | Ram stroke: 250 mm | Adjusting the ram: 100 mm | Grip: 750 mm | Power input: 28 kW | Ma...

    Brno, Czech Republic
  • Trusted Seller
    2019 PRESSMONT LKT 250D

    2019 PRESSMONT LKT 250D

    • Manufacturer: PRESSMONT

    Pressing force: 2500 kN | Ram stroke: 250 mm | Machine weight: 21000 kg

    Brno, Czech Republic
  • 1984 Šmeral LKT 250 A

    1984 Šmeral LKT 250 A

    • Manufacturer: Šmeral Brno
    • Model: LKT 250 A

    Table dimensions: 1575 x 1150 mm Nominal forming force: 250 t Good technical condition, under power. Ram stroke 250 mm Number of strokes 12 /min Adjustment of ram 125 mm Passage between racks 1600 mm Closed heigh...

    Sedliště, Czech Republic
  • Šmeral LKT 250 D

    Šmeral LKT 250 D

    • Manufacturer: Šmeral Brno
    • Model: LKT 250

    Nominal forming force: 250 t Table dimensions: 1575 x 1150 mm Machine weight: 27,000 kg ram clamping surface: 1380x850 mm Number of strokes: 20 strokes/min. Machine dimensions: 4615x2980x1500mm Good technical con...

    Sedliště, Czech Republic
  • no-image_en.png

    Šmeral Brno LKT 250 A Crank Press

    • Manufacturer: Šmeral Brno
    • Model: LKT 250 A

    Good condition Šmeral Brno LKT 250 A Crank Presses manufactured in 1987. Located in Czech Republic and other countries. Click request price for more information.

    Czech Republic
  • no-image_en.png

    Šmeral Brno LKT 250 Crank Press

    • Manufacturer: Šmeral Brno
    • Model: LKT 250

    Good condition Šmeral Brno LKT 250 Crank Presses available between 1974 and 1981 years. Located in Czech Republic and other countries. Click request price for more information.

    Czech Republic

Overview

Crank presses are industrial machines used primarily for stamping, punching, and forming metal sheets. These presses operate via a crank mechanism that converts rotary motion into linear motion, providing high force for precision tasks. They are essential in manufacturing processes for automotive parts, appliances, and various metal components.

FAQ

What should I consider when buying a used crank press?

Consider the machine's age, overall condition, press capacity, and any previous maintenance or repair records. It's also important to inspect the crank mechanism for any signs of wear or damage.

How do I ensure the crank press is shipped safely to my location?

Use a reputable transport service that specializes in heavy machinery. Ensure the press is properly secured and protected during transit to prevent any damage.

What is the maintenance schedule for a crank press?

Regular maintenance includes checking lubrication levels, inspecting the crank mechanism, and ensuring all moving parts are free of wear and tear. Refer to the manufacturer's manual for specific maintenance intervals and procedures.