Used Plate Heat Exchangers in Utrecht, Netherlands

Plate heat exchanger

Plate heat exchanger, not sanitary. 1 section with 19 plates. 4 in- / outlets of 22 mm. Total dimensions 40 x 25 x 50 cm.

1993 Alfa Laval plate heat exchanger

• Manufacturer: Alfa-Laval

Alfa Laval plate heat exchanger. 1 section - 50 plates - max 30 bar - Capacity 6.00/ 6.25.

Alfa Laval Contherm 6x9"

• Manufacturer: Alfa-Laval
• Model: CONTHERM 6X9

1x Scraped surface heat exchanger, dismanteled, excluding hydroset elevator construction, drive motor or frame. including Rotor and plastic scraper blades, cast product heads and Nickel plated cylinder. (Suitable...

Armfield FT 43-A-A

• Manufacturer: Armfield

Armfield Laboratory Pasteurizer FT 43A. With controls. Set consists out of feed tank, pump, plate heat exchanger, hot water tank, pump, holding and diverter valve. Total dimensions: 76x55x65 (lxwxh) cm - weight ...

2019 Kelvion NT50X CDL-S-16

Plate heat exchanger, sanitary (PHE). Test pressure: 13.0 bar - beam length: 150 cm, connections: 8x 2" Din. Currenct configuration: 2 Sections: 121-151 plates (total 272) - Connections head: 2 up, follower 2 up....

2009 Alfa Laval Front 8-RH

• Manufacturer: Alfa-Laval

Plate heat exchanger, sanitary (PHE). Pressure: 16,0 bar, Beam length: 120 cm, connections: 4x3" DIN. Current configuration: 1 sections: 81 plates. Design temperature 0/120 °C. - Connections head: 2 down, followe...

2013 Alfa Laval Front 8 RM

• Manufacturer: Alfa-Laval

Plate heat exchanger, sanitary (PHE). Pressure: 10,0 bar - beam length: 180 cm, connections: 8 x 3" Din. Currenct configuration: 3 Sections: 37-48-36 plates (total 121 plates) - Connections head: 2 up and 2 down,...

2001 Tetra Pak/Alfa Laval C6-SR

• Manufacturer: Alfa-Laval
• Model: C6-SR

Plate heat exchanger, sanitary (PHE). Dessign pressure: 10,0 bar. Beam length: 240 cm, connections: 16x 2" SMS. Current configuration: 4 Sections: 108-50-10-10 plates, total 178 plates. Connections head: 2 up, fo...

1993 Alfa Laval CLIP 8-RM

• Manufacturer: Alfa-Laval
• Model: CLIP 8-RM

Plate heat exchanger, sanitary (PHE). Pressure: 10,0 bar. Beam length: 180 cm. Connections: 2x 2" Din and 10x 3" SMS. Current configuration: 4 Sections: 17-18-18-24 plates, in total 77 plates. Connections head: 2...

1995 Alfa Laval M6

• Manufacturer: Alfa-Laval
• Model: M6

Skid mounted milk pasteurizer: Capacity: 7.000 l/h. Thermal cycle: in 4 → 55 (separator)→72 holding → 30°C. Balance tank, filter, pumps, heat exchanger Alfa-Laval M6, year: 1995, valves, control valve steam. Insu...

2007 APV N35

• Manufacturer: APV - Gaulin
• Model: N35

Milk pasteurization unit. complete skid mounted unit with all piping, valves on 1 stainless steel frame. Temperature scheme of milk: in 4°C -＞ outlet to homogeniser and/or separator (homogeniser/separator exclud...

1995 Alfa Laval Clip 10

• Manufacturer: Alfa-Laval
• Model: CLIP 10

Milk thermisator/pasteuriser for Full fatt milk, full automatic. Exisiting out of: Centrifugal pump feed pump to the pasteuriser, inlet filter, Balance tank with 3 level sensors, spraybowl for cip, 3 level senso...

2010 Alfa Laval C8

• Manufacturer: Alfa-Laval

Plate cooler, 2 sections, 90-36 plates. Connections: Head 2 Up, Follower 2 down.

2006 Alfa Laval C10-SR

• Manufacturer: Alfa-Laval

Design pressure: 10,0 bar, design temperature: -10/110°C, test pressure (Gauge): 13.0 bar

2008 Tetra Pak MS10-SR

• Manufacturer: Tetra Pak
• Model: MS10SR

Pressure: 10 bar / Beam length: 1000 mm, connections: 97 mm / 4 "SMS Currenct configuration: 1 Section: 44 plates - Connections head: 2 up, follower 2 down Total dimensions: lxwxh: 125 cm x 67 cm x 130 cm.