Used machinery in Flanders, Belgium

A082 : Aggregate crushing value apparatus dia.150mm

Aggregate crushing value apparatus dia.150mm Standard: comparable to BS 812:110 Comprising 150 mm nominal diameter steel cylinder, plunger, base plate, tamping rod and measure 115 mm diameter x 180 mm deep. Used ...

A070 Flakeniss / Thickeness Gauge

FLAKINESS/THICKNESS GAUGE

ZFG-3.1 GPSKIT1015 Light weight deflectometer+ printer+ case + MS

ZFG-3.1 GPS KIT 10 15 Light weight deflectometer Composed out of - ZFG-3.1 GPS 10 kg - ZFG weight 15 kg - Webapp - Printer in Case - Magnetic Stand - Transport Case for all on wheels

ZFG-3.1 Light weight deflectometer ZFG-3.0 70MN/m°

• Manufacturer: ZORN

Light Weight Deflectometer ZORN ZFG 3.1 (10-300) according to TP BF-StB Part B 8.3 & 8.4, ASTM E-2835 ? Integrated GPS/ GNSS receiver for determination of measurement position (can be deacvtivated) ? Integrated W...

TU 80-0.01US Ultrasonic Thickness Gauge

TU 80-0.01US Ultrasonic Thickness Gauge

S165-KIT Cone penetrometer, dial, complete

Cone penetrometer, dial, complete

B056-01-KIT Standard digital bitumen penetrometer

Standard digital bitumen penetrometer

C408-03 Crack width gauge for levels (5 pcs)

Crack width gauge for difference in levels (5 pcs) Range 40 mm, readings per mm

CA408-01 Crack width gauge for corners (5 2 pcs)

Crack width gauge for corners (5*2 pcs) Range 40mm, readings per mm

Justification Automatic Pull off Tester

Rectification of an automatic Pull off tester DY-2 following ISO7500-1 (wièout annex C) èe tester will be ready for a calibration under ISO7500-1 after èie rectification (calibration not included)

Calibration Pull off Tester

Calibration for a Pull off tester with one channel under ISO17025 accreditation 327-CAL The calibration/testing services offered in this quotation are performed by European Lab Services site Sint-Niklaas. Europea...

Calibration Proctor Mould Small diam 100

• Manufacturer: Proctor

Calibration of a Proctor Mould: diameter and height The calibration/testing services offered in this quotation are performed by European Lab Services site Sint-Niklaas. European Lab Services is accredited accordi...

Calibration Ductilometer three lc

Calibration Ductilometer Apparatus with three load cells

Calibration Blaine Apparatus: k-factor EN196-6

Calibration Blaine Apparatus k-factor following EN 196-6

S166-03 Test gauge, 30° angle

Cone test gauge, 30° angle