Building Filters

New Cosmac Processing

COSMAC KERF
- Manufacturer: Cosmac
MACHINE FOR LATERAL INCISIONS KERF AND SLOT. 3+3 SIDE MANDRELS WITH AUTOMATIC POSITIONING AND DRIVING. MAXIMUM WORKING WIDTH 1800MM
Formigine, Italy
COSMAC GIGA
- Manufacturer: Cosmac
CUTTING MACHINES for ceramic slabs. Multiblade cuts up to 20 tools. Automatic positioning of the cutting tools.
Formigine, Italy
COSMAC LTC
- Manufacturer: Cosmac
The band conveyor line has been purposely designed to carry the material from one processing stage to another, by rotating the direction to a set angle. The belts slide on rollers that limit the belt friction, so...
Formigine, Italy
COSMAC ASP
- Manufacturer: Cosmac
The group of water suction is used to draw the water after a cutting machine or profiling. This group is available individually, to be applied to an existing line or with rollers of different sizes.
Formigine, Italy
COSMAC S16 1700
- Manufacturer: Cosmac
Linear belt cutting machine with hot galvanized and stainless steel structure, with three cutting heads with supported shafts; the diamond cutting discs are mounted on chromium-plated and retified shafts allowing...
Formigine, Italy
COSMAC DRY CUTTING MACHINE
- Manufacturer: Cosmac
The DRY CUTTING MACHINE exploits a dry cutting system of the material applied to a rugged simple and versatile belt conveyor that allows the user to get a constant daily production. A well dimensioned incoming gu...
Formigine, Italy
COSMAC TMJ90
- Manufacturer: Cosmac
This semiautomatic machine is designed to make a 45 degree cut on pieces having a width surface of 600mm. Thanks to its retractable roller conveyor, which is ideal for supporting material during the processing an...
Formigine, Italy
COSMAC 3 Teste / 3 Heads
- Manufacturer: Cosmac
Linear cutting machine with belt and hot galvanized structure in stainless steel. It\'s equipped with three cutting heads with supported shafts; the diamond disks for the cutting are assembled on chromium plated ...
Formigine, Italy
COSMAC 2 Teste / 2 Heads
- Manufacturer: Cosmac
Linear cutting machine with belt and hot galvanized structure in stainless steel. It\'s equipped with two cutting heads with supported shafts; the diamond disks for the cutting are assembled on chromium plated gr...
Formigine, Italy
COSMAC MTDJ4T
- Manufacturer: Cosmac
The MTDJ4T machine is used to make a 45 degree cut on both sides of skirting tiles. This machine works in the same way as the other machines, but it gives you the possibility to make a 45 degree cut on both the r...
Formigine, Italy
COSMAC MB2T
- Manufacturer: Cosmac
The machine MB2T is used to chamfer costa retta steps on both the lower and upper sides where corners may be sharp or not perfect. The machine has an upper head and a lower one with the ability to perform a bevel...
Formigine, Italy
COSMAC MB4T
- Manufacturer: Cosmac
The MB4T machine is used to chamfer costa retta steps on both the lower and upper sides where corners may be sharp or not perfect. The two upper and lower heads of the machine allow for the execution of a more or...
Formigine, Italy
COSMAC BR6T
- Manufacturer: Cosmac
The machine has been devised to calibrate and bevel porcelain stoneware liners and glass. The material is conveyed by means of width adjustable timing belts. The belts variable speed towing device is equipped wit...
Formigine, Italy
COSMAC MT3TS
- Manufacturer: Cosmac
Cutting machine for big sizes. The slab is cut and square depending on the size of the tiles desired. Sheets can be used with a maximum size of 3000 x 1600.
Formigine, Italy
COSMAC MT4TS
- Manufacturer: Cosmac
Cutting machine for big sizes, with shipping tape available in various sizes. The machine can support 4 to 6 cutting heads, each of which has a power of 4kW. On the machine, as an option, you may require the auto...
Formigine, Italy