Used Cosmac Processing in Italy

COSMAC RMC25

• Manufacturer: Cosmac

This system allows you to dose, mix, and apply 2-COMPONENT resins using a manual dispensing gun. In the version equipped with a "color option," the resin can be colored with a third component (pigment) directly o...

COSMAC RMC25

• Manufacturer: Cosmac

This system allows you to dose, mix, and apply 2-COMPONENT resins using a manual dispensing gun.

COSMAC ALIMENTATORE AUTOMATICO

• Manufacturer: Cosmac

COSMAC OMEGA 45 2T

• Manufacturer: Cosmac

COSMAC MT 600 3T

• Manufacturer: Cosmac

MT 600 3T Power: 3 X 11KW

COSMAC PRAGMA 50 1T

• Manufacturer: Cosmac

COSMAC FRESA A PONTE PER TAGLI VERTICALI E A 45° Formato massimo 1500x 3000mm

• Manufacturer: Cosmac

COSMAC TM90

• Manufacturer: Cosmac

The small cutter �??TM 90�?� comes with a 600x600 mm anticorodal aluminium trolley to allow for highest-precision cutting of small or big formats, as well as for any type of grading, including bevel. Height...

COSMAC LAR

• Manufacturer: Cosmac

The LAR resin application line has been designed and developed for applying a fibreglass net on the rear side of tiles, using a special two-component resin. These tiles are used for the construction of ventilated...

COSMAC MIG1200

• Manufacturer: Cosmac

In order to glue the COSTA RETTA steps or the "V-CAP" elements obtained from the 45 degree-cut skirting tiles, it is necessary to use this accessory which reduces the processing time to the minimum and gives you ...

COSMAC GIGA DRY RECTIFY

• Manufacturer: Cosmac

COSMAC MTJ3T

• Manufacturer: Cosmac

Jolly cutting machine with 3 heads, for large sizes. The tape width is 1600. The cutting heads (3) have an output of 4kW each. The machine is supplied abutment, with powered belt, to facilitate the transport of t...

COSMAC dry cut

• Manufacturer: Cosmac

COSMAC MT400

• Manufacturer: Cosmac

Linear cutting machine with belt and hot galvanized structure in stainless steel. It\'s equipped with two cutting heads with supported shafts; the diamond disks for the cutting are assembled on chromium plated gr...

COSMAC TMFG 90

• Manufacturer: Cosmac

The new model of manual cutting machine TMFG 90, with the motor housed in the back part of the machine, allows the user to cut big sizes with no length limitation. This option is a big advantage since the market ...