Used Drilling Rigs

2024 SOOSAN JD800E-II

• Manufacturer: Soosan

New 2024 Soosan JD800E-II Rock Commander w/ QSB6.7 Series Tier 4 Final Equipped with JET9II Drifter 235 CFM @ 150 PSI Air Package Can be setup for T38, T45, or T51 – Customer Choice Unit starts a 14’ft starter st...

2019 Furukawa HCR1450EDII Stock# 4501

• Manufacturer: Furukawa
• Model: HCR1450EDII

Unit has 4,235 total hours Unit will be fully cleaned and freshly serviced. Excellent condition.

2006 Atlas Copco ROC D3

• Manufacturer: Atlas-Copco
• Model: ROC D3
• Hours: 3,979 hour

Equipped with COP 1240 Drifter 28 hours on machine since upgrades: New track chains New Ecm motor control New mast roller New cable New nose cone seals New accumulator diaphragms 2 new control switches at control...

1997 Ingersoll Rand ECM590

• Manufacturer: Ingersoll Rand
• Model: ECM-590

– Equipped with YH80A Drifter – Ready to work – Repairs needed are one door with broken hinges – Fuel stop solenoid – This machine has a new air end and has less than 200 hours on hydraulic pump

2005 Ingersoll Rand ECM590

• Manufacturer: Ingersoll Rand
• Model: ECM-590

– Equipped with YH80A – Ready to work – Repairs needed are inoperable fuel stop solenoid

2006 Ingersoll Rand ECM590

• Manufacturer: Ingersoll Rand
• Model: ECM-590

– Equipped with YH80A Drifter – Repairs needed or in the process of being repaired – Dust collector top new part has been fabricated need’s installed – Rod changer arm is broken have new parts to replace purchase...

2004 Ingersoll Rand ECM590

• Manufacturer: Ingersoll Rand
• Model: ECM-590

– Equipped with YH80A Drifter – Mechanic believes there is a broken pin in the fuel injection pump machine will idle but will not idle up. – Other repairs needed are inoperable fuel stop solenoid

2004 Ingersoll Rand ECM590

• Manufacturer: Ingersoll Rand
• Model: ECM-590

– Comes with YH70 not currently installed but will be mounted for transport – This unit has tracking issues will move but unknown if it’s the final drives or hydraulic motors. – Hammer needs to be mounted back on...

2000 Ingersoll Rand ECM590

• Manufacturer: Ingersoll Rand
• Model: ECM-590

– Equipped with YH80A Drifter – Unit needs nothing is currently running on a job at this time. – Has newer paint job – Manual rod changer – Long boom

Furukawa HD712 Hydraulic Drifter

• Manufacturer: Furukawa

HD712 Hydraulic Drifter / Hammer – Surplus / New For use on the following Furukawa machines: HCR1200ED HCR1200EDII

2005 INGERSOLL-RAND ECM660 III

• Manufacturer: Ingersoll Rand
• Model: ECM-660 III

Montabert HC160 Drifter Setup for T45 Cummins Diesel Engine Unit shows 2,307 engine hours, we estimate approximately 12,307 total frame hours 3,949 Percussion hours

2025 SULLIVAN PALATEK D185PIZ4

• Manufacturer: Sullivan - Palatek
• Model: D185PIZ4

D185 D185 PDZ Light-Weight Small Body Compressor Powered by: Deutz C 2.9 Liter T4 Final 49 HP Call For Pricing

2011 EPIROC FLEXIROC T35

• Manufacturer: Epiroc

COP1840 Drifter CAT C7.1 TIER 4 Diesel Engine Currently set up for T51 9620 total Engine Hours & 3755 Percussion Hours Holds up to 14″ ft Starter Dust Collector & Water Injections Very Good to Excellent Condition...

1979 INGERSOLL-RAND ECM350

• Manufacturer: Ingersoll Rand
• Model: ECM-350

2013 ATLAS COPCO FLEXIROC T45-10

• Manufacturer: Atlas-Copco
• Model: FLEXIROC T45

2013 Year – FlexiRoc T45-10 – GT60 Steel Equipped with the COP3060 Drifter 6300 total hours

Ingersoll Rand CM-672 Drilling Rig

• Manufacturer: Ingersoll Rand
• Model: CM-672

Good condition Ingersoll Rand CM-672 Drilling Rigs manufactured in 1999. Located in USA and other countries. Click request price for more information.