Used controller in Indiana, USA

CTD F426 Straight Cut-Off Saw 16" Blade 2700 RPM 5 Hp 3Ph Air Foot Control 90°

• Manufacturer: CTD

Used, in Good Working Condition, Tested OK. 90° cut only. Has backstop set at an angle. Blade and saw head can not turn. Working height is 32-1/4" Foot pedal controls. Air powered. Auto oiler. Setup for metal cut...

CTD F426 Straight Cut-Off Saw 16" Blade 3450 RPM 5 Hp 3Ph Air Foot Control 90°

• Manufacturer: CTD

Used, in Good Working Condition, Tested OK. 90° cut only. Working height is 32-1/4" Foot pedal controls. Air powered. Auto oiler. Setup for metal cutting. Probably aluminum. 3450 RPM. 5Hp motor. 3Ph 230/460V. Man...

Omga T521ST 18-20" Wood Cut Off Saw 5.6kw Upcut Pneumatic Control 230/460V 3Ph

• Manufacturer: Omga

Used, in Good Working Condition, Tested OK. This is for a 18" blade but 20" blade is optional. This unit comes with a 500mm blade which is basicly a 20" blade. Pneumatic foot pedal to activate cutting. 12-5/8" cr...

Omga T521ST 18-20" Wood Cut Off Saw 6 Hp Upcut Pneumatic Control 230/460V 3Ph

• Manufacturer: Omga

Used, in Good Working Condition, Tested OK. This is for a 18" blade but 20" blade is optional. This unit comes with a 20" blade. Pneumatic foot pedal to activate cutting. 12-5/8" cross cut max. This is for straig...

Sampson MN150-10 Double 45° Miter Saw 10" Blade 1.5Hp Motor 230/460V 3Ph Notche

• Manufacturer: Sampson

Used, in Good Working Condition. Tested. Pneumatic air foot pedal controls. Motors are both wired for 480V 3 phase. This was setup to cut plastic window frames. If this item ships as Flat Rate Freight please see ...

LeTarte EM11KA Aluminum Double Miter Saw 1.5HP Motors Dual Blades 230/460V 3Ph

• Manufacturer: LeTarte

Used, in Good Working Condition, Tested OK. 11" and 10.5" blades. Wired for 230V. If this item ships as Flat Rate Freight please see details in Shipping tab

Omga 600 P3S Radial Arm Saw 14" Blade 5Hp Motor 24" 600mm Rip 230/460V 3Ph

• Manufacturer: Omga
• Model: 600 P3S

Used, in Good Working Condition, Tested OK. This saw does not come with a blade This saw is wired for 480V. Missing one guard bolt. This is not in new condition. Well used would better describe this unit. Was use...

Delta Rockwell Vintage Radial Arm Saw 12" Blade 3Hp Motor 20" Rip 230/460V 3Ph

• Manufacturer: Rockwell

Used, in Working Condition, Tested OK. This saw does not come with a bench top. This saw is wired for 480V. Motor can be wired for 220/440V. 1" arbor No all adjustments are free. Main ones are. If this item ships...

Sampson SC Metal Cut Off Chop Saw 3500RPM 12" Blade 3Hp 230/460V Aluminum

• Manufacturer: Sampson

Used, in Good Working Condition. Removed From a Working Environment. This was used to cut aluminum. This is wired for 460V. Blade is carbide. The RPMs are close to 3500. Foot pedal operator. Air cylinder to cycle...

CTD F255 Straight Cut off Chop Saw 10" Blade 3450RPM 3Hp 3Ph Aluminum Metal

• Manufacturer: CTD

Used, in Good Working Condition, Tested OK. Hand operator. Both hands have to be used to operate. Has oiler for the blades. Blade is 10". 3 hp motor. 230/460V. Wired for 480V. If this item ships as Flat Rate Frei...

CTD Machine Double End Compound Miter Pneumatic Trim Saw 3HP 460V 3PH 16' Rail

• Manufacturer: CTD Machine

Miter Saw in good working condition. CTD Machine 2DC-02. Recently upgraded to 3Hp motors and added Powerflex VFD drive. 10" Blades. 16' Rail length, 36" work height. 28" Base depth. If this item ships as Flat Rat...

Elumatic MGS72 Elu Miter Cut Off Saw 12" Circular Blade 3Ph 230V 3460RPM Mitre

• Manufacturer: Elu

Used, in Good Working Condition, Tested OK. For 230V. Only Heavy duty stand 45 cuts. Pneumatic air hold down clamps If this item ships as Flat Rate Freight please see details in Shipping tab

Cut Off Abrasive Metal Saw 18" Blade 2485RPM Cast Iron Base 7.5Hp 230/480V Chop

Used, in Good Working Condition. Model 18 No brand. Made in Japan. 18" Blade. Made for abrasive blade. Looks like they were cutting aluminum with a carbide blade. Can cut angles. Cast iron base. This has a brake ...

Everett 16-MIT Cut Off Abrasive Metal Saw 16" Blade Exhaust Blower 10Hp 3210RPM

• Manufacturer: Everett

Used, in Good Working Condition, Tested. This is a working cut off saw. 16" blade. 230/460V 10 Hp main motor. Has a blower motor. 1 hp motor with a 16" centrifugal fan. Inside of cabinet is rusting through the bo...

Delta Rockwell 28-350 Vertical Bandsaw 20" Wheel 1Hp 230/460V 3Ph Metal Wood

• Manufacturer: Rockwell
• Model: 28-350

Used, in Good Working Condition. Wired for 480V 1Hp 3Ph motor. Older unit. May need a tune-up Top is 20x24" If this item ships as Flat Rate Freight please see details in Shipping tab