Used controller

DAVIS STANDARD 130mm 32:1 L/D 18935

• Manufacturer: Davis-Standard

One (1) used Davis Standard 130mm (5.1″) model 130IN45HT extruder. S/N U7644. Shop order 58491. Extruder has 32:1 L/D ratio with a seven (7) zone electrically heated, air cooled, and non-vented barrel at a 42″ ce...

DAVIS STANDARD 3.5″ 34:1 L/D 17735

• Manufacturer: Davis-Standard

One (1) Used Davis Standard model 35IN35SR 3.5″ extruder, S/N K2191. 34:1 L/D barrel having a seven zone electrically heated and water cooled (closed loop) barrel at a 56″ centerline height. Gearbox has a 5.67:1 ...

BELLAFORM BH25-25D 25mm EXTRUDER 14768

Bellaform co-extrusion package consisting of the following:Bellaform model BH25-25D 25mm extruder. S/N P19-330877, 10.5 kW AC motor with tachometer and drive, 220-Volt operation. 25:1 L/D air cooled barrel with 3...

DAVIS STANDARD 130mm 32:1 L/D 18933

• Manufacturer: Davis-Standard

One (1) used Davis Standard 130 mm (5.1″) model 130IN45HT extruder. S/N 14844. Shop order 70693. Extruder has 32:1 L/D ratio with a seven (7) zone electrically heated, air cooled, and non-vented barrel at a 42″ c...

DAVIS STANDARD 1.5″ 34:1 L/D 17542

• Manufacturer: Davis-Standard
• Model: Thermatic

one (1) used Davis Standard model Thermatic 150 1.5″ extruder, S/N 62570, 34:1 L/D barrel having a five (5) zone electrically heated, air cooled, and non-vented barrel at approximately a 42? centerline height. Ge...

4.5″ CRAMMER FEEDER 18765

One (1) Used Egan heavy duty crammer feeder having a nominal 4.5″ diameter screw. Screw is belt driven by a 30 hp dc motor through a Nuttal oversize gear reducer. Motor and gearbox have been updated. Includes ada...

KILLION 1″ 24:1 L/D EXTRUDER 16305

24:1 Killion pedestal extruder. S/N N6598 with a three (3) zone electrically heated air cooled barrel. Gearbox has a reduction ratio of 30:1 and is direct driven by a 3HP 1750/2050 RPM DC motor. Barrel can be rai...

HPM 3.5″ 30:1 L/D EXTRUDER 17578

One (1) used 3.5″30:1 HPM extruder having an electrically heated water cooled (closed loop) vented and plugged barrel at a 51 ½” centerline height. Koellmann gearbox is driven by a 100 HP D/C motor with a Eurothe...

DAVIS STANDARD 3.5″ 30:1 L/D 16399

• Manufacturer: Davis-Standard

Used Davis Standard model MV35IN35SR, 3.5″ extruder, S/N K2187, SO# 99878. 30:1 L/D barrel having a seven zone electrically heated and water cooled (closed loop) and side vented barrel at a 52″ centerline height....

BRABENDER 25mm TWIN SCREW EXTRUDER 16813

• Manufacturer: Brabender

Brabender model 088 twin screw extruder, air cooled. Includes DC motor and temperature control panel.