Used controller

Hartig SHJ-72 Plastic Extruder Package

• Manufacturer: Gentec

Extruder Guards Heater Control Box: Phase Convertor Motor: Quenching Trough:

45MM Theysohn Twin Screw Extruder, 60 HP, 36:1 L/D

• Manufacturer: Theysohn Extrusion

45MM Theysohn Twin Screw Extruder, 60 HP, 36:1 L/D Used 45mm Theysohn Twin Screw Extruder, model TSK-N-045, co rotating screw, 36:1 L/D ratio, electrically heated, water cooled barrel, (1) feed, (2) top and side ...

3.5" Davis Standard Cold Feed Rubber Extruder

• Manufacturer: Davis-Standard

3.5" Davis Standard Cold Feed Rubber Extruder Used 3.5" Davis Standard cold feed rubber extruder, model 35IN35, electrically heated, water cooled barrel, powered roller strip feeder section, Thermatic gearbox, 17...

4.5" NRM Extruder, 20:1 L/D, 150 HP

• Manufacturer: NRM

4.5" NRM Extruder, 20:1 L/D, 150 HP Used 4.5" NRM Pacemaker extruder, 20:1 L/D, electrically heated, air cooled, 150 HP DC motor with SCR, control panel with 4 barrel, 1 die zone with temperature controllers.

18 MM Leistritz Twin Screw Extruder, Model MIC18PH/GL-35D

• Manufacturer: Leistritz

18 MM Leistritz Twin Screw Extruder, Model MIC18PH/GL-35D Used Leistritz twin screw extruder, model MIC18PH/GL-35D, 18 mm screws, co-rotating screws, 35:1 l/d, 500 rpm screw speed, electrically heated, water cool...

Davis Standard 6" Single Screw Extruder System

• Manufacturer: Davis-Standard

The Davis Standard 6" Single Screw Extruder System is a robust piece of used recycling equipment, ideal for processing tasks. It operates with a powerful 400 HP DC motor and drive, facilitating efficient performa...

2.5" Davis Standard Extruder, 24:1, 50 HP

• Manufacturer: Davis-Standard

2.5" Davis Standard Extruder, 24:1, 50 HP Used 2.5" Davis Standard extruder, model 25IN25H, 24:1 L/D, electrically heated, air cooled, jacketed feed section, top vented and plugged barrel, 17.2:1 gearbox ratio, 1...

0.375" Randcastle Microtruder Extruder, Model RCP-0375

• Manufacturer: Randcastle

0.375" Randcastle Microtruder Extruder, Model RCP-0375 Used 0.375" Randcastle Microtruder extruder, model RCP-0375, .375" diameter singled screw, 24:1 l/d, electrically heated, air cooled barrel, jacketed feed se...

4.5" Davis Standard Extruder, 30:1 L/D, 150 HP

• Manufacturer: Davis-Standard

4.5" Davis Standard Extruder, 30:1 L/D, 150 HP Used 4.5" Davis Standard Thermatic extruder, model 45IN45HT, 30:1 L/D, air cooled barrel, jacketed feed section, vented barrel, gearbox rated 365 hp, 17.4:1 gearbox ...

Tinius-Olsen Extrusion Plastometer

• Manufacturer: Tinius-Olsen

Tinius-Olsen Extrusion Plastometer Used Tinius-Olsen extrusion plastometer, benchtop design, with heater and controls, serial# 172911-3.

Tinius-Olsen Extrusion Plastometer

• Manufacturer: Tinius-Olsen

Tinius-Olsen Extrusion Plastometer Used Tinius-Olsen extrusion plastometer, benchtop design, with heater and controls, serial# 172911-1.

48" Winder

48" Winder Used winder, for 48" long rolls, driven by 0.5 DC motor, with controls and SCR on frame, with extra spindle.

0.375" Randcastle Microtruder Extruder, Model RCP-0375

• Manufacturer: Randcastle

0.375" Randcastle Microtruder Extruder, Model RCP-0375 Used Randcastle RCP-0375 3/8" Single Screw ExtruderUsed .375" Randcastle Microtruder extruder, model RCP-0375, .375" diameter singled screw, 24:1 l/d, electr...