Used controller

DELTAPLAST 5 HP PEDESTAL EXTRUDER 18675
One (1) used 30mm Deltaplast model DVH 30.125:24 pedestal extruder. S/N WO281:1.91. Having a 24:1 L/D ratio. Unit has a three (3) zone electrically heated, air cooled, and non-vented barrel. Radicon (David Brown)...
Elk Grove Village, IL
Theyson TSK 060-44D-EXH 1500 Twin Screw Extruder | 60mm | 55 kW | 44:1 L/D | ATEX Motor
- Manufacturer: TheysohnTheysohn
54072001 Unused Theyson TSK 060-44D-EXH 1500 Twin Screw Extruder | 60mm | 55 kW | 44:1 L/D | ATEX Motor. 44:1 L/D. Maximum screw speed 500 RPM via a gearbox by a 55 Kw (73.75hp)1500 RPM-380volt/50cycle/3Ph Ex-pro...
Belvidere, IL
Trusted Seller
BUSS 200 HP
- Manufacturer: Buss
Used 100mm Buss kneader with 9/1 L/D barrel. Driven by 200 hp DC motor, includes 5.94/1 gearbox, jacketed barrel and clam shell barrel opening. Includes operator control panel. Kneader will discharge into approxi...
Hainesport, NJ
Trusted Seller
Cincinnati Argos 112P-65-20-1150-UL
- Manufacturer: Cincinnati
Used 112mm Cincinnati model Argos 112P-65-20-1150-UL parallel counter rotating twin screw plastic extruder. Screw length approximately 3020mm long x 112mm diameter screw, L/D ration of 27:1. Barrel is electricall...
Hainesport, NJ
Trusted Seller
Aeromatic Fielder Extruder / Spheronizer
- Manufacturer: Aeromatic-Fielder
Aeromatic Fielder Extruder / Spheronizer Used Aeromatic Fielder Nica Extruder Spheronizer set ,model E-140 radial extruder, stainless steel product contact surfaces, variable speed feeder and impeller drives, on ...
Massachusetts, USA
Leistritz 60mm ZSE MAXX Twin Screw Extruder – High-Performance Industrial Extruder
- Manufacturer: Leistritz
52546001 Used Leistritz 60mm ZSE MAXX Twin Screw Extruder, Type ZSE60MAXX-20D. (2) Co-rotating screws approximately 2.44" diameter x 62" long. Speed 400 rpm. Approximate 20 to 1 L/D ratio. 4 Barrel sections, 1 fe...
Belvidere, IL
Trusted Seller
1957 HERLAN P6
- Manufacturer: Herlan
- Model: P6
Herlan P6 Impact Extrusion Press: IEX-048 Manufacture: - Herlan P6 / 1957 Capacity: - 270 mton rating Stroke: - 13.8" / 350 mm Strokes per Minute: - 85 maximum Maximum Diameter: - 45 mm (aluminum) Minimum W...
Banner Elk, NC
Davis Standard 10" Extruder, Model 100TH100D. 38:1 L/D ratio; (8) zone electrically heated, water cooled
- Manufacturer: Davis-Standard
10755162 Used Davis Standard 10" Extruder, Model 100TH100D. 38:1 L/D ratio; (8) zone electrically heated, water cooled and non-vented barrel at nominal 44" center-line. 15.08:1 Gearbox reduction ratio; Rated at 1...
Belvidere, IL
Trusted Seller
2005 WELEX 41" (2) Fixed Position
- Manufacturer: Welex
Used Welex two-position winder. Both positions are fixed and include 3" air shafts for approximately 36" OD finished rolls. Included are operation controls, 6" shafts and gear head motor for each winding position...
Hainesport, NJ
EDI / NORSDON 50″ SHEET 18832
- Manufacturer: EDI
One (1) used Nordson/ Extrusion Dies Inc Model Ultra-100 heavy duty sheet die with a 50″ slot opening. Integral upper flexible lip and fixed removable lower lip. Adjusting bolts on 1″ centers. 45 degree restricto...
Elk Grove Village, IL
EDI / NORDSON 56″ SHEET 18833
- Manufacturer: EDI
One (1) used Nordson/ Extrusion Dies Inc Model Ultraflex HRMC-100 heavy duty sheet die with a 56″ slot opening. Integral upper flexible lip and fixed removable lower lip. Adjusting bolts on 1″ centers. 45-degree ...
Elk Grove Village, IL
Trusted Seller
Used Processing Technologies International LLC Model G6500 Trident Series Single Screw extruder
- Manufacturer: International
Used Processing Technologies International LLC Model G6500 L/D ratio 32:1Trident Series Single Screw extruder. S/N 16709-4480. Gear Drive Info: PTI Model ZPE2-360-B B7 S/N 15258, Ratio: 12.50:1, Driver: 1800, Dri...
Salisbury, NC
Trusted Seller
1985 HOLTON ALUMINUM CONFORM EXTRUSION LINE
- Manufacturer: HOLTON
Holton Conform Extrusion Rod Line: EX-482 Manufacture: - Holton Conform Inc. - New 1985 +/- - Model: C300H Equipment: - 9.5 mm diameter Wire Rod Uncoiler Reels - Wire Rod Straightener - Cleaning Unit (new rotat...
Banner Elk, NC
Lleal AME-2600 SF-H Double Sigma Extruder Kneader | 350 Gal Working | Vacuum Rated | 300 HP
- Manufacturer: Sigma
54020001 Used Lleal Model AME-2600 SF-H Double Sigma Extruder Kneader, 316 Stainless Steel. Useful volume 350 gallon, total volume 2,600 liter (680 gallon). Vacuum Rated 356 degrees F at 60psi. Sigma blades. Hyd...
Belvidere, IL
3.4″ Davis Std. Extruder (Recently Rebuilt)
- Manufacturer: Davis-Standard
3.4″ Davis Std. Extruder (Recently Rebuilt) 50 HP AC Motor with AC Drive – rated up to 100 HP 24:1 L/D Ratio – Non-Vented Eurotherm Controllers Screw in Good Condition NOTE: Rebuilt and painted 2 years ago, never...
Rockville Centre, NY