Used controller

BRABENDER 3/4″ LAB EXTRUDER 18623

• Manufacturer: Brabender

Used C.W. Brabender Independent Table Top Extruder. S/N 1067/4. Type IND/EXTR/16-04-000. 3/4″ diameter 25:1 L/D ratio barrel. Four (4) zone temperature control panel. Extruder driven by a 1 HP D/C motor with SCR ...

CLOEREN / PRODUCTION COMPONENTS 70″ 18339

One (1) used Cloeren / Production Components model Master-flex HD-40 sheet die with a 58″ slot opening. Heavy duty body. Integral upper flexible lip and fixed lower lip. Adjusting bolts on 1″ centers. 0.040″ flex...

PRODUCTION COMPONENTS 66″ SHEET DIE 18328

One (1) used Production Components Master Flex HD-40 sheet die with a 66″ slot opening. Heavy duty body. Integral upper flexible lip and fixed lower lip. Adjusting bolts on 1″ centers. 0.040″ flex adjustment. Coa...

NRM/DAVIS STANDARD 3.5PMIV RH/WC VTD/PLGO 12733

• Manufacturer: Davis-Standard

NRM / Davis Standard model 3.5PMIV RH/WC VTD/PLGO, 3.5″ extruder, S/N 19222. 24:1 L/D water cooled 7 zone vented and plugged barrel. Approximately 100-150HP DC motor into a belt driven 15.12:1 gearbox with a 1.25...

CLOEREN / PRODUCTION COMPONENTS 68″ 18332

One (1) used Cloeren / Production Components model Master-Flex HD-40 sheet die with a 68″ slot opening. Heavy duty body. Integral upper flexible lip and fixed lower lip. Adjusting bolts on 1″ centers. 0.040″ flex...

CLOEREN 58″ SHEET DIE 18329

One (1) used Cloeren sheet die with a 58″ slot opening. Heavy duty body. Integral upper flexible lip and fixed lower lip. Adjusting bolts on 1″ centers. 0.040″ flex adjustment. Coat-hanger manifold. 1″ back cente...

CLOEREN 50″ SHEET DIE 18326

One (1) used Cloeren / Production Components model Master-Flex HD-40 sheet die with a 50″ slot opening. Heavy duty body. Integral upper flexible lip and fixed lower lip. Adjusting bolts on 1″ centers. 0.040″ flex...

CLOEREN / PRODUCTION COMPONENTS 58″ 18338

One (1) used Cloeren / Production Components model Master-flex HD-40 sheet die with a 58″ slot opening. Heavy duty body. Integral upper flexible lip and fixed lower lip. Adjusting bolts on 1″ centers. 0.040″ flex...

PRODUCTION COMPONENTS 54″ SHEET DIE 18327

One( 1) used Production Components Master Flex HD-40 sheet die with a 54″ slot opening. Heavy duty body. Integral upper flexible lip and fixed lower lip. Adjusting bolts on 1″ centers. 0.040″ flex adjustment. Coa...

EDI 52″ AUTO-FLEX CONTOUR DIE 16438

• Manufacturer: EDI

Extrusion Dies, Inc. Auto-Flex AF6R HM40 – 52″ wide contour die. S/N 11-30268. Manufactured in 2011. 14 heater zones. 480V/1ph/60Hz operation. Chrome plated flow surfaces 52 each AF6R lip adjustments. 0.500″ lip ...

GLOUCESTER COOLING ROLL STACK 18352

One (1) used Gloucester heavy duty cooling and polishing stand having three (3) 55″ face x 24″ diameter chrome plated rolls mounted in a 45-degree angle arrangement for down stack operation at a 62″ center line h...

American Kuhne AK120mm 30:1 Single Screw Extruder 2013

• Manufacturer: Kuhne

American Kuhne AK120mm 30:1 Single Screw Extruder 2013 Screw Size: 120 mm 30:1 L/D Ratio 200 HP motor Digital Controls 42″ Centerline Height Electrically heated – Air Cooled Barrel 480v

2.5″ Akron/EDS Akron 36:1 Extruder Reconditioned

2.5″ Akron/EDS Akron 36:1 Extruder Reconditioned 42″ Centerline – 36:1 L/D Ratio – 6″ x 3.5″ feed throat, Belt Driven through a 13.95:1 Koellman PEZS 360/3.5 Gearbox, Rated to 125 HP, 75 HP Baldor DC Motor with R...