Used controller

Trusted Seller
24" x 12"
Used 24" Wide 3-Roll Down-Stack Cooling Roll Stack (3) 12" diameter rolls Approximately 5' cooling conveyor Rbber to metal pull roll assembly Chill rolls driven by a 5HP DC motor without drive Pull rolls are driv...
Hainesport, NJ
Trusted Seller
2006 Scheer Bay WAA300
- Manufacturer: Scheer
Used 13.5" wide Scheer Bay Model air knife. Model WAA300, Serial #WAA300-0582, new 2006. Driven by a 7.5 HP Baldor Super E motor, 460 volt 3 phase 60 hertz. Includes starter and controls. Caster mounted. Previous...
Hainesport, NJ
Trusted Seller
10" Stewart Bolling / Beringer Water Ring Pelletizing Line
- Manufacturer: Stewart Bolling
10" Stewart Bolling / Beringer Water Ring Pelletizing Line Used 10" Intercole Stewart Bolling / Beringer water ring pelletizing line consisting of: 10" Intercole Stuart Bolling single screw extruder, 10:1 l/d, el...
Cleveland, OH
57″ AUTOFLEX SHEET DIE 17858
Used 57″ wide (Cloeren?) Auto Flex sheet extrusion die with NDC thickness gauge including controls. Previously used on 64″ wide sheet extrusion line at approximately 30 mil thickness (for disposable hot/cold drin...
Elk Grove Village, IL
GLOUCESTER 6″ EXTRUDER 12088
Gloucester 6″ extruder. No model number and no serial number. 30:1 L/D electrically heated water cooled 6 zone vented barrel with screw and clamp. No motor. 42″ center line 1HP 6″ x 11″ oval in-feed bridge breake...
Elk Grove Village, IL
Trusted Seller
DAVIS STANDARD MODEL 100TH100D 10" 38:1 L/D EXTRUDER
- Manufacturer: Davis-Standard
Davis Standard Model 100TH100D 10" 38:1 L/D Extruder Eight (8) zone electrically, heated, water cooled and non-vented barrel at a nominal 44 center-line. Shop Order 03643. Gearbox has a reduction ratio of 15.08:...
Midwestern United States, USA
Trusted Seller
BERLYN CF4549
- Manufacturer: BERLYN
3.5'' BERLYN CONTINUOUS SCREEN CHANGER, MODEL CF4549, 4.9 SQ INCHES OF OPEN AREA. 1 HEATING ZONE,10.5 KW OF HEATING CAPACITY. WITH 2 HP HYDRAULIC POWER PACK AND CONTROLS
Valley Cottage, NY
Trusted Seller
BERLYN CF4549
- Manufacturer: BERLYN
3.5'' BERLYN CONTINUOUS SCREEN CHANGER, MODEL CF4549, 4.9 SQ INCHES OF OPEN AREA. 1 HEATING ZONE,10.5 KW OF HEATING CAPACITY. WITH 2 HP HYDRAULIC POWER PACK AND CONTROLS
Valley Cottage, NY
Leistritz ZSE 100 GLAAX 100mm Co-Rotating Twin Screw Extruder
- Manufacturer: Leistritz
10151570 Used Leistritz ZSE 100 GLAAX 100mm Co-Rotating Twin Screw Extruder, Driven by 330 kw (442 hp), 1600 rpm DC motor with SCR control. Has 300 rpm screw speed, rated at 5000 Newton meters per shaft torque c...
Belvidere, IL
Trusted Seller
1988 Welex 41''
- Manufacturer: Welex
Used Welex 41" sheet extrusion line: - 3.5" 30/1/ L/D Welex extruder. Has vented and plugged barrel, but includes 2 stage screw and spare screw. Has electrically heated water cooled system with water pump. Extrud...
Valley Cottage, NY
PARKER HANNIFIN/ZENITH MFG 5 HP 12582
- Manufacturer: Parker Hannifin
Parker Hannifin / Zenith Manufacturing 5HP melt pump model 60-20000-1550-4. Manufactured 4-23-99. Mounted on a stand. Five (5) zone heater controls. Last used on a 3.5″ extruder. 5HP 230/460-Volt 1,755 RPM motor....
Elk Grove Village, IL
Trusted Seller
1988 Welex 41''
- Manufacturer: Welex
Used Welex 41" sheet extrusion line:- 3.5" 30/1/ L/D Welex extruder. Has vented and plugged barrel, but includes 2 stage screw and spare screw. Has electrically heated water cooled system with water pump. Extrude...
Valley Cottage, NY
Trusted Seller
DAVIS STANDARD 1.5"
- Manufacturer: Davis-Standard
- Model: 15
Used 1.5" Davis Standard 28/1 L/D Non-Vented Air Cooled Extruder. New in 1989. Equipped with 6.53/1 gearbox ratio. Gearbox is belt driven through a 15 hp DC motor. Includes temperature control panel with motor dr...
Hainesport, NJ
Trusted Seller
1977 FIELDING & PLATT 1600mton Aluminum Extrusion Line
- Manufacturer: FIELDING & PLATT
Manufacture: - Fielding & Platt - New 1977 - Decommissioned 2013 in good running condition Scope - Press - complete and proper, installed and included - Press control cabinets installed and included - Billet hea...
Banner Elk, NC
GLOUCESTER 2.5″ 32:1 L/D EXTRUDER 17690
Gloucester 2.5″ extruder, 32:1 L/D five (5) zone air cooled and vented barrel at a 45″ centerline height. Top center feed throat. Driven by a 50 HP A/C 1750/2100 RPM motor, includes 6 zone temperature control pan...
Elk Grove Village, IL