Used controller

DYNISCO 20 HP MELT PUMP 17583
- Manufacturer: Dynisco
One (1) used Dynisco melt pump last used with a 4.5″ 30:1 250 HP extruder. Includes 20 HP D/C motor with gearbox and drive shaft. No controls.
Elk Grove Village, IL
Trusted Seller
2014 Davis-Standard Super Blue 75MM
- Manufacturer: Davis-Standard
Used 3″ Davis-Standard Super Blue 75MM Extruder with BPM Bay Plastics Machinery WBX1210-15 Water Bath, EVAK-06 Vacuum Air Knives, and SB 100 Pelletizer, 2014: DS Super Blue Single Screw Extruder: – 3″ (75MM) – L/...
$69,900 USD
Chicago, IL
Trusted Seller
ATD 8"
- Manufacturer: ATD
One (1) used 8" ATD flex lip sheet die, flexible upper lip, fixed lower lip on die stand with control panel.
Valley Cottage, NY
Trusted Seller
ATD 8"
- Manufacturer: ATD
One (1) used 8" ATD flex lip sheet die, flexible upper lip, fixed lower lip on die stand with control panel.
Valley Cottage, NY
Trusted Seller
LEISTRITZ 30mm
- Manufacturer: Leistritz
Used 30mm Leistritz counter-rotating twin screw extruder, 42/1 L/D vented barrel. New 1987. Has 11kw motor, 2200 rpm, 422 volt input. Gearbox rated at 13.5kw at 60hz. Barrel is electrically heated and air cooled ...
Hainesport, NJ
Trusted Seller
RANDCASTLE Ø19 мм, L/D 24:1
- Manufacturer: RANDCASTLE
Used Randcastle Laboratory Sheet Extrusion Line Consiting of the Following Items: - .75" Randcastle 24/1 L/D extruder with temperature control panel, model RCP0750, serial #J2271. - 2" O.D. x 8" wide chill roll s...
Hainesport, NJ
DAVIS STANDARD 15INDS20 1.5″ EXTRUDER 12754
- Manufacturer: Davis-Standard
Davis standard model 15INDS20 1.5″ extruder S/N K-9754. SO# 02359. 24:1 L/D. Powered by a fan cooled 15 HP 500-Volt 1750/2300 RPM DC motor through a 6.53:1 gearbox 152 RPM screw speed. Electrically heated and fan...
Elk Grove Village, IL
Trusted Seller
Extru-Tech Model E-325 Single Screw Extruder.
- Manufacturer: EXTRU-TECH
Used Extru-Tech Model E-325, Single Screw Extruder. Unit designed primarily for research and development purposes. 3.25", Approximately 40 HP motor, Can process between 150 to 800 pounds per hour (68 to 363 kilog...
Decatur, IL
WAYNE 8″ X 5″ HORIZONTAL 16359
Wayne horizontal roll stack, S/N 9545. Five (5) 8″ wide x 5″ diameter rolls. Three (3) chrome and two (2) rubber. Each roll has a rotary union for cooling. Powered by two gearhead motors. Operator controls and on...
Elk Grove Village, IL
Trusted Seller
Rifenhauser Sheet line 4.72''
- Manufacturer: Rifenhauser
120 mm diameter screw. (4.72”) Sheet width is 900 mm (35.4”) rollstack controls See photos, still in plant for inspection This machine is sold "AS IS, WHERE IS", buyer responsible for removal and shipping cost.
Valley Cottage, NY
Gloucester 2522 R2 2.5" Extruder – 60 HP, 32:1 L/D, Reconditioned
- Manufacturer: GloucesterGloucester
10755143 Used Gloucester Model 2522 R2 2.5" 32:1 L/D Extruder with an electrically heated, water cooled (closed loop) vented and plugged barrel at approximately a 72" centerline height. Gearbox has a reduction ra...
Belvidere, IL
Trusted Seller
Extruder 38.1 mm (1.5 in) Aluminum - IPP# 78337
- Manufacturer: Sterling
Sterling Having 3-zone electrically heated water cooled non-vented Xaloy 306 lined barrel. Barrel water cooling system utilizes cast aluminum heaters in a closed loop system including reservoir pump and heat exch...
Princeton Junction, NJ
WAYNE 1.250″ 30:1 L/D EXTRUDER 16355
- Manufacturer: Wayne
Wayne 1.25″ extruder, S/N 9414-832. 30:1 L/D electrically heated, air cooled, vented (venting is plugged), barrel driven by a 7.5HP DC motor with SCR control 230-Volts input power. Includes track wheel base and a...
Elk Grove Village, IL
JOHNSON 1.5″ 8786
- Manufacturer: Johnson
Johnson 1-1/2″ extruder 24:1 L/D, non-vented barrel mounted on base for co-extrusion. 10HP DC motor with no controls. 11.32:1 gear box rating at 41HP with a 1.25 service factor. No barrel cooling. S/N 7621-15
Elk Grove Village, IL
JOHNSON 1.5 8891
- Manufacturer: Johnson
Johnson 1-1/2″ extruder, 24:1 L/D. Non-vented barrel mounted on a base for co-extrusion. 10HP DC motor with no controls. S/N 7619-15. 11.32:1 gear box, 41 HP with a 1.25 service factor. No barrel cooling.
Elk Grove Village, IL