Used Machining Centers in Hesse, Germany

2017 DMG Mori CMX 70 U 3+2
- Manufacturer: DMG Mori
- Model: CMX 70 U
Control: Heidenhain TNC 620 | 5. axis: 3 + 2 Achsen nicht simultan | X-axis [mm]: 750 | Y-axis [mm]: 600 | Z-axis [mm]: 520 | Rapid motion (x/y/z) [m/min.]: 30 | Max. revolution [rpm]: 12.000 | Spindle power [kw...
Oestrich-Winkel, Germany
2002 DMG DMC 100 V HI-DYN
- Manufacturer: DMG Mori
- Model: DMC 100
Control: Heidenhain iTNC 530 | X-axis [mm]: 1.000 | Y-axis [mm]: 800 | Z-axis [mm]: 600 | Spindle speeds [rpm]: 18.000 | Tool: SK 40 | Toolchanger: 30 | Table size [mm]: 1.250 x 800
Oestrich-Winkel, Germany
2006 DMG DMC 635 V
- Manufacturer: DMG Mori
- Model: DMC 635
Control: Heidenhain iTNC 530 | X-axis [mm]: 635 | Y-axis [mm]: 460 | Z-axis [mm]: 510 | Rapid motion (x/y/z) [m/min.]: 30 / 30 / 30 | Spindle speeds [rpm]: 20 - 10.000 | Spindle motor [kw]: 9 / 13 | Tool: SK 40 ...
Oestrich-Winkel, Germany
2022 DMG DMF 360 / 11 linear
- Manufacturer: DMG Mori
- Model: DMF 360
Control: Heidenhain TNC 640 Celos | X-axis [mm]: 3.600 | Y-axis [mm]: 1.100 | Z-axis [mm]: 900 | Amount of controlled axes: 5 | Rapid motion (x/y/z) [m/min.]: 80 / 60 / 60 | Spindle speeds [rpm]: 20 - 10.000 | S...
Oestrich-Winkel, Germany
1998 DMG DMC 103 V
- Manufacturer: DMG Mori
Control: HEIDENHAIN TNC 426 | X-axis [mm]: 1.000 | Y-axis [mm]: 600 | Z-axis [mm]: 600 | Rapid motion [m/min.]: 30 | Spindle speeds [rpm]: 20 - 8.000 | Tool: ISO 40 | Tool capacity: 24 | Table size [mm]: 1.200 x...
Oestrich-Winkel, Germany
2006 DMG DMC 100 H
- Manufacturer: DMG Mori
- Model: DMC 100
Control: Siemens 840D powerline + Shopmill | X-axis [mm]: 1.000 | Y-axis [mm]: 1.000 | Z-axis [mm]: 1.000 | Spindle speeds [rpm]: 8.000 | Transmission ratio: 2 | Tool: HSK 100 | Tool capacity: 270 / 360 | Amount...
Oestrich-Winkel, Germany
2007 DMG DMC 60 T RS 3
- Manufacturer: DMG Mori
- Model: DMC 60 T
Neue B-Achslager Geometrieprotokoll vorhanden Control: Siemens 840 D | New spindle: 2024 | X-axis [mm]: 780 | Y-axis [mm]: 560 | Z-axis [mm]: 560 | B-axes: +30 / -120° | Spindle speeds [rpm]: 12.000 | Tool: SK 40...
Oestrich-Winkel, Germany
Trusted Seller
Clamping plate
Addition Well-preserved clamping plate (machining center table) Further information Surface clean and flat, sides machined all around, center hole 40 mm Ø, various M 16 threaded holes
Wiesbaden, Germany
Trusted Seller
DECKEL GK 1
- Manufacturer: Deckel / Maho
- Model: DECKEL GK 1
Additional Used older engraving machine Accessories 6 mm collet and numbers and letters of your choice
Wiesbaden, Germany
Trusted Seller
Deckel G 1 U
- Manufacturer: Deckel / Maho
- Model: DECKEL G1 U
Well-maintained engraving milling machine Accessories: Letter and number set, workpiece clamp, spare belt
Wiesbaden, Germany
Trusted Seller
Parallel vice
Add-on Used parallel vise for use on a magnetic chuck, ground on all sides
Wiesbaden, Germany
Trusted Seller
RÖHM UH 3
- Manufacturer: Röhm
Additional Barely used and very well-preserved machine vise on a rotating plate Accessories Smooth clamping jaws
Wiesbaden, Germany
Trusted Seller
HILMA (wahrscheinlich) PWO-001896
- Manufacturer: Hilma
Add-on Used hydraulic machine vice on a rotating plate Accessories Smooth clamping jaws
Wiesbaden, Germany
Trusted Seller
HILMA (wahrscheinlich) SM 160
- Manufacturer: Hilma
Add-on Used hydraulic machine vice, on a rotating plate Accessories Pull-down clamping jaws No. 372204
Wiesbaden, Germany
Trusted Seller
1979 ALLMATIC 125
- Manufacturer: ALLMATIC
Add-on Little-used and very well-preserved mechanical high-pressure machine vice, pneumatically operated (instead of a hand crank) Accessories Built-in rotating plate, two longitudinal support surfaces for securi...
Wiesbaden, Germany