Used Lathes in Saxony, Germany

Steel holder for lathes and planes #B15617

Steel holder, tool holder, workpiece holder, support used Manufacturer unknown Steel holder, turning tool holder, tool holder, workpiece holder, support for machine tools used angle adjustable Changes and errors ...

Spare parts for lathes FAT, WAFUM, PONAR, Poland TUR, TUD, TUM

• Manufacturer: TuR

for example Clutch plates and clutches, V-belt pulleys, gear parts, gears, spindles

Spare parts for lathes Stankoimport, Krasnij Proletariy, Efremow 16K20

• Manufacturer: Stankoimport

for example Clutch plates and clutches, V-belt pulleys, gear parts, gears, spindles

1954 VDF WOHLENBERG VDF

• Manufacturer: Wohlenberg
• Model: VDF
• Spindle bore: 80 millimeter

Type of control: Konventionell | Control: n/a | Machine-no.: 27XXX | Turning length: 4000 mm | Spindle diameter: Ø 80 mm | Faceplate speeds i: 355 RPM | Turning diameter over cross slide: Ø 1000 mm | Max. turnin...

1957 VDF W 40

• Manufacturer: VDF - Boehringer

Type of control: Konventionell | Machine-no.: 030XXXX | Turning diameter: Ø 960 mm | Turning length: 4500 mm | Spindle speeds: Ø 105 RPM | Turning diameter over cross slide: Ø 600 mm

1970 VDF BOEHRINGER T 11

• Manufacturer: VDF - Boehringer
• Spindle bore: 750 millimeter

Type of control: Konventionell | Control: n/a | Machine-no.: 40XXX | Turning diameter: Ø 700 mm | Turning length: 3000 mm | Spindle diameter: Ø 750 mm | Spindle bore: 70 mm | Swing diameter over cross slide: Ø 4...

2008 SPINNER TC77 MCY

• Manufacturer: Spinner
• Model: TC77 MCY

Further information: Y axis + C axis. Machine can be inspected under power by arrangement.

1990 EST TICINO 520 x 1500

• Manufacturer: EST Ticino
• Spindle bore: 160 millimeter

Further information: - Made of cast iron - Hardened and ground guideways The machine can be viewed under power by appointment.

2010 DMG CTV 160

• Manufacturer: DMG Mori
• Model: CTV 160
• Spindle bore: 100 millimeter

Type of control: CNC | Control: SIEMENS SINUMERIK 840D ERGOline | Turning speeds: 20 - 6000 RPM | C-axis: Yes | Chuck diameter: 160 - 200 mm | C-axis speed: 0 - 100 RPM | C-axis division accuracy: 0,02° Degree |...

1984 DECKEL GILDEMEISTER MD 3S

• Manufacturer: Deckel / Maho
• Model: GILDEMEISTER MD 3S
• Spindle bore: 73 millimeter

Type of control: CNC | Control: ELTRO MPULS | Turning diameter: 400 mm | Turning length: 600 mm | Swing diameter: 600 mm | Spindle bore: 73 mm

Lunettes, pegs

• Manufacturer: Unknown

various steady rests, setting sticks, revolving or stationary for lathes

1968 WMW EB 40-300

• Manufacturer: WMW
• Model: EB 40/300
• Power requirement: 5 kilowatt

Relieving lathe This machine can also be used as a milling head (as a side support). Designation: horizontal unit drilling machine with EB 40 Design: drilling other technical features: Headstock: - Speed 22 - 200...

POTISJE PA 22

• Manufacturer: POTISJE
• Power requirement: 7.8 kilowatt

DLZ Lathe 4000 x 500 mm Turning diameter above the bridge: 480 mm Turning diameter without bridge: 670 mm Turning diameter over support: 280 mm Turning length: 4000 mm Main spindle bore: 62 mm Front bearing bore:...

1970 GEMA LZ 160

• Manufacturer: Gema
• Model: LZ 160
• Spindle bore: 40 millimeter
• Power requirement: 2.2 kilowatt

Threading possible: Metric, Withwort and modular thread Equipment: - 3-jaw chuck Ø 200mm with internal clamping jaws - Multifix quick-change steel holder - Foot brake - Cooling water pump (exclusive feed)

2007 HAAS SL 30

• Manufacturer: Haas
• Model: SL-30

Equipment: 3-jaw power chuck KITAKAWA Ø 250 mm (without jaws) 4200 rpm. Operable via 2-position foot switch. Tool turret with powered tools available. Electric coolant system provided. Tool measuring system avail...