Construction » New Jersey

Building Filters

17

Used module in New Jersey, USA

  • Gigatronics GT9000S

    Gigatronics GT9000S

    • Manufacturer: Gigatronics
    • Model: GT9000S

    A001: Cable Kit (SMA) | A003: Rack Mount without Slides | Freq range: 0.01 to 26 Ghz | 27: 60 dB Scan Modulation (w/o Opt 26), Factory Config | 28: Timebase, 5x10 E10 per day | 22a: Rear Panel RF Output Connecto...

    $11,687 USD

    Get financing

    Est. $230/mo

    Farmingdale, NJ
  • Gigatronics GT9000/ .01-20

    Gigatronics GT9000/ .01-20

    • Manufacturer: Gigatronics

    Synthesized Signal Sweep Generator, .01 to 20 GHz, 453 configuration

    $2,048 USD
    Farmingdale, NJ
  • Anritsu 69017B

    Anritsu 69017B

    • Manufacturer: Anritsu
    • Model: 69017B

    The Anritsu 69017B series are your best choice for A.T.E. applications. They pack the highest performance available in a single 13.3 cm package to minimize rack space. High output power assures adequate signal st...

    $15,847 USD

    Get financing

    Est. $311/mo

    Farmingdale, NJ
  • no-image_en.png

    Keytek ECAT-E501A

    • Manufacturer: Keytek

    EMC Test System with: E501A - Plug-in combination wave surge simulator to produce the combination waves required by IEC 6100-4-5, ANSI/IEEE C62.41 Cat. B and UL 1449 (8/98) at 3kA

    $8,395 USD

    Get financing

    Est. $165/mo

    Farmingdale, NJ
  • Agilent/Keysight E1440A

    Agilent/Keysight E1440A

    • Manufacturer: Agilent - Keysight
    • Model: E1440A

    The Agilent E1440A function/sweep generator is a C-size, 2-slot, message-based VXI module. It provides low-distortion sinewaves and a variety of waveforms for applications requiring high-frequency stability and r...

    $6,248 USD

    Get financing

    Est. $123/mo

    Farmingdale, NJ
  • no-image_en.png

    Anritsu 68077B

    • Manufacturer: Anritsu
    • Model: 68077B

    The Anritsu 68077B is your best choice for A.T.E. applications. It packs the highest performance available in a single 13.3 cm package to minimize rack space. High output power assures adequate signal strength to...

    $18,550 USD

    Get financing

    Est. $364/mo

    Farmingdale, NJ
  • Agilent/Keysight 83631B

    Agilent/Keysight 83631B

    • Manufacturer: Agilent - Keysight
    • Model: 83631B

    The Agilent 83631B is a dedicated source optimized for use with Agilent 8510 systems. It combines the high performance and accuracy of a synthesized source with the speed and versatility of a sweep oscillator. Th...

    $10,448 USD

    Get financing

    Est. $205/mo

    Farmingdale, NJ
  • Rohde and Schwarz 1066.4769.02

    Rohde and Schwarz 1066.4769.02

    • Manufacturer: Rohde & Schwarz

    Tracking Generator Option In the normal mode, the tracking generator sends a signal exactly at the input frequency of the instrument without a frequency offset. For frequency-converting measurements, it is possib...

    $1,995 USD
    Farmingdale, NJ
  • Adivic MP9000

    Adivic MP9000

    • Manufacturer: Adivic

    RF Station Wireless Communication Test System ADIVIC proudly introduces the new model - MP9000 RF Station. MP9000 provides a platform that adopts different wireless communication modules into variety of combinati...

    $2,995 USD
    Farmingdale, NJ
  • Agilent/Keysight E2900A (80000)

    Agilent/Keysight E2900A (80000)

    • Manufacturer: Agilent - Keysight

    The Agilent E2900A is an HP 8000 Data Generator System. The 80000 is of modular structure using plug-in cards with a wide range of data generation and stimulus characteristics. This allows the user to configure t...

    $2,048 USD
    Farmingdale, NJ
  • Agilent/Keysight 08592-60098

    Agilent/Keysight 08592-60098

    • Manufacturer: Agilent - Keysight

    The output signal from the A3A1 comb generator assembly, with the Step Recovery Diode Module (SRD) disconnected, is adjusted for maximum peak-to-peak voltage. A3A1C5 FREQ is centered, and the comb generator frequ...

    Farmingdale, NJ
  • Trimble S6 DR300+, TSC2, R8,

    Trimble S6 DR300+, TSC2, R8, TSCE, PDL4135, 58021019, 571-04-360 Kit

    • Manufacturer: Trimble Spectra
    • Model: R8
    • Machine weight: 1.52 kg
    • Ingress Protection (IP) rating: IP67

    Trimble GPS Kit 1x Trimble S6 DR300+ With Tripod 1x TSC2 Controller With Antenna 1x TSC2 Controller 2x TSCe Controller P/N 45185-20 1x PDL4135 (410-430Mhz) P/N 56651-42-01 1x Trimble robotic holder Global 5802101...

    $28,298 USD

    Get financing

    Est. $533/mo

    Farmingdale, NJ
  • no-image_en.png

    Varian CPI HFS-1000G/VA

    • Manufacturer: Varian

    1kW 13.56MHz Power Supply/Generator Module Rack System

    $4,195 USD
    Farmingdale, NJ
  • no-image_en.png

    Agilent/Keysight M9330A

    • Manufacturer: Agilent - Keysight
    • Model: M9330A

    Keysight's M9330A arbitrary waveform generator delivers unprecedented performance for creation of complex wideband waveforms. The combination of high sampling rate and high bit resolution in a single instrument e...

    Farmingdale, NJ
  • no-image_en.png

    Agilent/Keysight M9331A

    • Manufacturer: Agilent - Keysight
    • Model: M9331A

    Keysight's M9331A arbitrary waveform generator delivers unprecedented performance for creation of complex ultra-wideband (UWB) waveforms. The combination of high sampling rate and high-bit resolution in a single ...

    Farmingdale, NJ
12

Overview

Construction equipment encompasses a wide range of heavy-duty machines used for various tasks in construction projects. These include earthmoving machines like excavators and bulldozers, lifting equipment like cranes, and road-building machinery like pavers and rollers. This machinery is essential for tasks such as digging, lifting, demolition, and paving.

FAQ

What should I consider when buying used construction equipment?

Check the machine’s age, operating hours, and overall condition. Verify maintenance records and inspect for any wear or damage. It's also wise to consider the availability of spare parts and service support.

How can I safely transport construction equipment?

Use a specialized transport service experienced in heavy machinery. Ensure the equipment is properly secured and protected during transit, and comply with all local regulations regarding oversized loads.

What is the maintenance schedule for construction equipment?

Regular maintenance includes checking fluids, inspecting hydraulic systems, and ensuring all moving parts are lubricated. Follow the manufacturer’s maintenance guidelines for specific intervals and tasks.