New Conow Dump Trailers in Germany

Conow tilting bridge with wide-wall superstructure 80 cm high, variant 2.1

• Manufacturer: Conow

Floor panel 4 mm thick Profiled laser-welded drop sides Front and rear wall and right-hand side are firmly welded to the tipper body Left-hand full-length pendulum dropside with full-length central locking, opera...

Conow

• Manufacturer: Conow

Conow tipper bridge with body 95 / 90 cm high

• Manufacturer: Conow

- left side tiltable (on request tiltable to the right side) - left sides with longitudinally divided profiled laser-welded drop sides, - left side is equipped with upper pendulum drop side and lower drop side - ...

Conow tipper bridge with combined body 95 / 90 cm high

• Manufacturer: Conow

- left side tiltable (on request tiltable to the right side) - right side with continuous side wall firmly welded - the left side with two longitudinally divided drop sides reinforced by 3 vertical - by 3 vertica...

Conow HW 60 V4

• Manufacturer: Conow

- tipping bridge with wide wall 120 cm high - left side tiltable - left side with 2 pendulum drop sides, center stanchion and central locking system, - right side with continuous drop sides, firmly welded, - fron...

Conow HW 80 V4

• Manufacturer: Conow

Tipping bridge with multi-purpose superstructure V4 - tipper bridge with wide wall body 120 cm high - left side tiltable (or right side tiltable on request) - left side with two pendulum drop sides, middle stanch...

Conow HW 80 V4.1

• Manufacturer: Conow

Tipping bridge with combined superstructure V4.1 - Tipping bridge with combined superstructure 120 cm high - tiltable to the left (tiltable to the right on request) - end wall and rear wall are continuous drop si...

Conow HW 60 V2.2

• Manufacturer: Conow

- Tilting bridge with wide wall structure 95 cm high - tiltable on one side, with a middle stanchion - front and rear walls are firmly welded to the tipping bridge - one side: continuous dropside, firmly welded t...

Conow HW 60 V4.1

• Manufacturer: Conow

- Tipping bridge with combined body 120 cm high. - End wall and rear wall are continuous drop sides and firmly welded to the tipping body - right side wall with two drop sides and middle stanchion also firmly wel...

Conow HW 60 V2.5

• Manufacturer: Conow

- Tilting bridge with wide wall structure 95 cm high - tiltable on both sides with two center stanchions - front and rear walls are firmly welded to the tipper body - both sides with pendulum tailboards, center s...

Conow HW 60 V3.2

• Manufacturer: Conow

- Tipping bridge with combined superstructure 95 cm high - front, rear and one side wall are each continuous drop sides and are firmly welded to the tipping body - the other side wall can be opened completely via...

Conow HW 80 V3.2

• Manufacturer: Conow

Tipping bridge with combined superstructure 95 cm high - tiltable to the left (tiltable to the right on request) - front, rear and one side wall are continuous drop sides and firmly welded to the tipping body - t...

Conow HW 60 V3.1

• Manufacturer: Conow

- Tipping bridge with combined superstructure 95 cm high. - front, rear and one side wall are continuous drop sides and firmly welded to the tipping body - the other side with two longitudinally divided drop side...

Conow HW 60 V2.1

• Manufacturer: Conow

- Tilting bridge with wide wall 95 cm high - tiltable on one side, without center stanchion - Tipping bridge on the tipping side with reinforced outer frame profile 6 mm, - front and rear walls are firmly welded ...

Conow HW 80 V4.2

• Manufacturer: Conow

- Tipping bridge with combined superstructure 120 cm high - tiltable to the left (on request also tiltable to the right) - front, rear and one side wall are continuous drop sides and firmly welded to the tipping ...