Used Centrifugal Pumps

Gusher CL6X6-13SELCDMADP Vertical Centrifugal Pump 6x6" Flanged 600 GPM 40Hp

• Manufacturer: Gusher

Immersion Depth (Length from flange to bottom of intake): 20" Pump is in good clean condition. Looks repainted, possibly rebuilt but we don't know for sure. Impeller looks new. Tested @460V. 24"x 36" mounting ...

Cornell 3RB-F16K Horizontal Centrifugal Pump 5"x 3" Flanged Discharge Rebuilt

• Manufacturer: Cornell

Rebuilt repainted condition. 420 Lbs. If this item ships as Flat Rate Freight please see details in Shipping tab

Ingersoll Rand Type HC Size 2.5X1.5X12 End Suction Centrifugal Pump

• Manufacturer: Ingersoll Rand

New Surplus, Acquired From Spare Parts Storeroom Pump has some rust Type HC Size 2.5X1.5X12 S.N. 0387/4156 Impeller 12.250" 1-3/8" Shaft 2.5" Inlet 1.5" Discharge Contact us for a freight quote or set up your own...

Gusher CL4X4-8SEL+58CDM-ADP Vertical Centrifugal Pump 4x4" 550GPM 10Hp 3PH 215TC

• Manufacturer: Gusher

Immersion Depth (Length from flange to bottom of intake): 78" (24"x 36" Mounting plate) Pump was used in a coolant pit, was only used for about a month. 850 Lbs. If this item ships as Flat Rate Freight please se...

MAGNATEX MAGNETIC DRIVE Pneumatic PUMP MODEL MP221-N25N-140TC SIZE 1X3/4X5

• Manufacturer: Magnatex

S/N M-504508. 316 STAINLESS STEEL. RATED FOR 10 GPM @ 60' TDH. 5.6" IMPELLER Ø. 1.5 HP MOTOR.

Peerless 4AE11 Split Case Centrifugal Pump 5x4" Flanged 15Hp 230/460V 3PH

• Manufacturer: Peerless

In Good Used Condition. Removed from a Working Environment. Tested @460V. 22"W x 48" base plate. If this item ships as Flat Rate Freight please see details in Shipping tab

Gusher CL4X4-13SEL+58CDM-ADP Vertical Centrifugal Pump 4x4 500GPM 40Hp 3PH 324TC

• Manufacturer: Gusher

Immersion Depth (Length from flange to bottom of intake): 79" (24"x 36" Mounting plate) Pump was used in a coolant pit, was only used for about a month. 1475 Lbs. If this item ships as Flat Rate Freight please s...

Burks GNB6-1-1/2-AB-6.25 Bronze Centrifugal Pump 2"x 1.5"npt Bronze Impeller

• Manufacturer: Burks

In Good Used Condition. If this item ships as Flat Rate Freight please see details in Shipping tab

Scot Model 17 Cast Iron Centrifugal Pump 2x2" NPT 200 GPM 5Hp 230/460V 3PH 182JM

• Manufacturer: Scot Pump

New surplus. Removed from spare parts crib. If this item ships as Flat Rate Freight please see details in Shipping tab

Union Unilign 8X8X18 Centrifugal Pump 2250 GPM 170 Ft. Head 1800rpm

• Manufacturer: Union

In good used condition This pump comes out of a parts warehouse and it appears it was rebuilt and has been sitting in storage for a long time. Comes with a new seal that has not been installed. Union Unilign 8X8X...

Pump, Centrif., 5 HP, S/st, Size 2G, Quimby, #S611766

Quimby Centrifugal Pump - Model B8964. Stainless steel construction, size 2G, driven by a 5 HP motor. Last used at 100 GPM and 50' head for efficient flow. Serial number unavailable.

Sanwa VM 25 Stainless Centrifugal Pump 1" Flanged 2Hp 460V 13 GPM Ext Shaft

• Manufacturer: Sanwa

Used condition. Unit is tested and runs, pump was not tested for leaks. Sanwa Hydrotech Type VM Size 25. Stainless pump and shaft. Set up with an extra long shaft extension. 15-1/2" from motor to mounting flange...

Goulds 3196 Stainless Centrifugal Pump 1"x 1-1/2" Flanged 4.5" Impeller 5Hp

• Manufacturer: Goulds
• Model: 3196

In Good Used Condition. Clean all parts look original. Pump input is 1-1/2 and out is 1". The NPT is both 1-1/2" If this item ships as Flat Rate Freight please see details in Shipping tab