
2018 COMEC Performance 4.5
- Manufacturer: Comec
- Axle: 3 axles
SOSP. FULL PNEUMATIC 1 Liftable axle ABS ADR Number of axles: 3 | Useful range: 31000 | Type of tyres: 385/65 R 22.5 | Total length: 10.48 | Inside length: 9.20 | Internal height: 1.84 | Overall width: 2.55 | Int...
Andria, Italy
Comec Belt Surfacer
- Manufacturer: Comec
The SPN800 Belt Surfacer offers a highly cost-effective and efficient solution for resurfacing engine components such as intake and exhaust manifolds, cylinder heads, covers, pans, and other flat surfaces. Design...
Mansfield, Australia
Comec Valve Refacing Machine
- Manufacturer: Comec
The RV516 is one of the fastest and most precise valve grinding machines available, featuring advanced technical solutions that enhance both speed and accuracy. Its centreless grinding system, which causes the va...
Mansfield, Australia
Comec Head & Block Resurfacer
- Manufacturer: Comec
The RP1000 is a resurfacing machine designed for cylinder heads and engine blocks of cars and trucks, as well as for all flat surfaces requiring a precise and finished mating surface. All major components, includ...
Mansfield, Australia
Comec Cylinder Boring Machine
- Manufacturer: Comec
The AC170 boring machine is designed for the reconditioning of cylinder blocks for motor cars and trucks, accommodating diameters ranging from 35 to 170 mm. The machine’s exceptional finishing and precision are a...
Mansfield, Australia
Comec Head & Block Resurfacer
- Manufacturer: Comec
This model integrates proven features, such as the flat and V-shaped lubricated slides on the base, which ensure smooth and reliable operation. It also incorporates innovative technologies, including a table feed...
Mansfield, Australia
Comec Valve Seat Machine
- Manufacturer: Comec
Mansfield, Australia
Comec Valve Seat Machine
- Manufacturer: Comec
Mansfield, Australia
Comec Cylinder Head Resurfacer
- Manufacturer: Comec
The RP330 Resurfacer is a user-friendly machine designed for resurfacing engine heads of cars and light trucks, made from either aluminium or cast iron. Its unique operating system, in which the head moves while ...
Mansfield, Australia
Comec Pressure Tester for Cylinder Heads and Blocks
- Manufacturer: Comec
The VPT130 is an advanced tester tank designed for the precise and efficient detection of failures and wear in cylinder heads and blocks through immersion in hot water. Constructed from durable stainless steel an...
Mansfield, Australia
Comec CNC Head & Block Resurfacer
- Manufacturer: Comec
Mansfield, Australia
Comec CNC Cylinder Boring & Resurfacing Machine
- Manufacturer: Comec
The ACF200.CNC boring machine seamlessly integrates two essential operations in the reconditioning of car and truck monoblocks—boring and smoothing—into a single, advanced system. Featuring cutting-edge CNC contr...
Mansfield, Australia
Comec Head & Block Resurfacer
- Manufacturer: Comec
The Comec RP850 head and block resufacer delivers high speed resurfacing of cast iron and aluminum. Using specialized CBN or PCD tooling will deliver an accurate high quality finish. With a wide range of features...
Mansfield, Australia
Comec Cylinder Boring Machine
- Manufacturer: Comec
The AC200 boring machine is specifically designed for the reconditioning of cylinder blocks in motor vehicles and trucks, with bore diameters ranging from 30 to 170 mm. It delivers exceptional finishing quality a...
Mansfield, Australia
Comec Cylinder Boring & Resurfacing Machine
- Manufacturer: Comec
The ACF200 seamlessly integrates both primary reconditioning operations—boring and resurfacing—essential for maintaining light and heavy vehicle cylinder blocks. Despite its compact footprint, the ACF200 is engin...
Mansfield, Australia

