Used cispr

TBOH01 5 µH, 10A LISN, CISPR 16-1-2, CISPR 25, 1 path, EN 55025

• Manufacturer: LiSN

The TBOH01 5uH LISN is a device required to setup conducted noise measurements of DC-powered devices. It is designed to be used for EMC pre-testing in the frequency range of 150kHz to 110 MHz. The LISN is inserte...

TBL0550-1 5 µH, 50A LISN, CISPR 16-1-2, CISPR 25, 1 path, EN 55025, MIL-STD-461F

• Manufacturer: LiSN

The TBL0550-1 5µH LISN is a device required to setup conducted noise measurements of DC-powered electronic equipment. It is designed to be used for measurements in the frequency range of 150kHz to 110 MHz accordi...

Rohde & Schwarz ESPI

• Manufacturer: Rohde & Schwarz
• Model: ESPI

B2 The R&S ESPI EMI test receivers are especially designed to meet all EMC testing demands during product development and for EMC precertification. Equipped with the preselector/preamplifier option (R&S ESPI-B2),...

SCHWARZBECK NSLK 8127

• Manufacturer: SCHWARZBECK

Single-phase LISN network 2 x 16 A, 10 kHz to 30 MHz. Frequency range: 10 kHz to 30 MHz AMN impedance: (50 µH + 5 ?) || 50 ? Pre-filter choke: 250 µH Maximum continuous current: 2 x 16 A Maximum voltage: - 250 V ...

TBLC08 50 Ohm // 50 µH + 5 Ohm, 8A LISN, 2 paths, CISPR 16-1-2

• Manufacturer: LiSN

The TBLC08 50uH LISN is a Line Impedance Stabilization Network for the measurement of line-conducted interference within the range of 9kHz to 30MHz, according to the CISPR16 standard. The device is designed for t...

TBL5016-3 50 Ohm // 50 µH + 5 Ohm, 16A LISN, 4 paths, CISPR 16-1-2

• Manufacturer: LiSN

The TBL5016-3 is a Line Impedance Stabilization Network for the measurement of line-conducted interference within the range of 9 kHz to 30MHz, according to the CISPR 16-1-2 standard. The device is designed for te...

TBL5016-2 50 Ohm // 50 µH + 5 Ohm, 16A LISN, 2 paths, CISPR 16-1-2

• Manufacturer: LiSN

The TBL5016-2 is a Line Impedance Stabilization Network for the measurement of line-conducted interference within the range of 9kHz to 30MHz, according to the CISPR 16-1-2 standard. The device is designed for tes...

T500HVD Non-contact AC high voltage detector with hot stick

• Manufacturer: BEIJING GFUVE ELECTRONICS

The model T500HVD is designed to detect the presence of high voltage without physical contact. As the sensor is moved closer to the voltage carrying conductor, its sensor head picks up the radiated electric field.

VVLA-30M Three Loop Antenna

The three loop antenna VVLA-30M is a standard measurement antenna according to CISPR15-2018 GB17743-2007 EN55015 standard

ESRP3 - Test Receiver - ROHDE AND SCHWARZ - 9 kHz - 3.6 GHz

• Manufacturer: Rohde & Schwarz
• Model: ESRP3

EMI Test Receiver9 kHz - 3.6 GHz EMI test receiver and signal/spectrum analyzer combined in one box Weighting detectors: PK+, QPK and CISPR and RMS average (CISPR 16-1-1) Resolution bandwidths according to CISPR ...