Used Electrical Test Instruments in Dublin, Ireland

Schloder SESD230

Details The Schloder SESD230 ESD Simulator delivers up to 30kV in both air and contact discharge modes, complying with IEC 61000-4-2 standards (150 pF / 330 Ohm network). It supports single or repeated pulse mode...

Schloder SESD200

Details The Schloder SESD200 ESD Simulator delivers precision electrostatic discharge testing with output voltages up to 16.5kV in air and 9kV in contact mode. It offers single pulse or repeated operation, a pre-...

Rohde & Schwarz ESW8

• Manufacturer: Rohde & Schwarz
• Model: ESW8

Details The Rohde and Schwarz ESW8 is an advanced EMI test receiver supporting frequencies from 2 Hz to 8 GHz, delivering exceptional RF characteristics and fast measurement speed. It complies with CISPR16-1-1, A...

Solar 2854-2

Details The Solar 2854-2 LISN is a precision Line Impedance Stabilization Network designed for EMC testing, delivering accurate measurement of conducted emissions to ensure compliance with international EMI stand...

Rohde & Schwarz ESVS30

• Manufacturer: Rohde & Schwarz
• Model: ESVS

Details The Rohde & Schwarz ESVS30 EMI Test Receiver operates from 20 MHz to 1 GHz and offers full compliance with CISPR16-1 and VDE0876 standards. It features integrated preselectors, selectable 10 dB preamplifi...

Rohde & Schwarz ESIB7

• Manufacturer: Rohde & Schwarz
• Model: ESIB7

Details The Rohde & Schwarz ESIB7 EMI Test Receiver features a frequency range from 20 Hz to 7 GHz, with exceptional sensitivity (NF typ. 10 dB), low noise (<–3 dBµV), and broad dynamic range. It supports fast sc...

Schaffner NSG2025-8

• Manufacturer: Teseq - Schaffner

Details The Schaffner NSG2025-8 is a high-end 3-phase fast transient/burst generator capable of generating signals up to 8kV with a maximum burst frequency of 500kHz. It integrates a 30A coupling network and supp...

Schaffner NSG2025-4

• Manufacturer: Teseq - Schaffner

Details The Schaffner NSG2025-4 is a high-end three-phase Fast Transient/Burst Generator, delivering up to 4.4kV pulse amplitude with a maximum burst frequency of 1MHz. It integrates a 30A coupling network and su...

Rohde & Schwarz ESU26

• Manufacturer: Rohde & Schwarz
• Model: ESU26

Details The Rohde & Schwarz ESU26 is a high-performance EMI test receiver and spectrum analyzer covering 20Hz to 26.5GHz. It is CISPR 16-compliant and meets all commercial and military standards for electromagnet...

Rohde & Schwarz ESW

• Manufacturer: Rohde & Schwarz
• Model: ESW

Details The Rohde & Schwarz ESW provides exceptional signal analysis with frequency coverage from 1 Hz to 44 GHz, supporting compliance with CISPR 16-1-1, ANSI C63.2, MIL‑STD‑461, and FCC standards. It delivers h...

Keysight Technologies 84105EM

• Manufacturer: Agilent - Keysight

Details The Keysight (Agilent) 84105EM EMC Design Development System integrates the E7401A EMC analyzer and the 11945A close field probe set, offering a comprehensive setup for electromagnetic compatibility testi...

Teseq (Schaffner) NSG 5600

• Manufacturer: Teseq - Schaffner

Details The Teseq Schaffner NSG 5600 is a precision EMC tester that generates synchronized, multi-channel automotive-specific waveforms including voltage dropouts, sinusoidal bursts, dips, ISO/SAE pulses, and mag...

Hipotronics 880PL-10MA

Details RENT Hiptronics 880PL-10MA (call for availability) The Hiptoronics 880PL-10mA DC hipot tester is an economical solution to DC field testing of cables, terminations, motors, generators and other electrical...

Keysight Technologies 11956A

• Manufacturer: Agilent - Keysight

Details The Keysight (Agilent) 11956A is a high-power antenna capable of handling a maximum continuous power of 1000 Watts. It maintains a VSWR of less than 2:1 and operates with a 50-ohm impedance. This model in...

Schaffner NSG431

• Manufacturer: Teseq - Schaffner

Details The Teseq Schaffner NSG431 ESD Gun offers precision electrostatic discharge testing from 2 to 21 kV, with a swift rise time of 5 ns ±30 % at 2 kV, a discharge capacitor of 150 pF ±10 %, and a discharge re...