Used tc

2013 DMG MORI CTX GAMMA 2000 TC

• Manufacturer: DMG Mori
• Model: CTX GAMMA 2000 TC

Good running machine, can be seen under power. Programmable Steady Rest 120 Position ATC HSK 63 Milling Spindle

2015 DMG MORI CTX BETA 800 TC

• Manufacturer: DMG Mori
• Model: CTX BETA 800 TC

CNC Lathe features a 19.7" swing, 40" machining length, and a 10" chuck. Max RPM at 5,000. Equipped with Siemens 840 D sl Operate, coolant thru mill spindle, and chip conveyor for enhanced functionality. 4-Color ...

2007 YCM TC-26

• Manufacturer: YCM
• Model: TC-26

2007 YCM TC-26 CNC lathe with LNS SERVO S3 Barfeed. Specs: 500 mm swing, 647 mm machining length, 2-axis, 10" chuck, 4,000 RPM max. Features FANUC TXP-100e control, hydraulic chuck, parts catcher, 12-position tur...

2014 Takisawa TC-203J CNC Lathe ()

• Manufacturer: Takisawa
• Model: TC203J

Imperial Metric Fanuc 0iT-D Control Main Motor 15HP 3200 RPM A2-6 Spindle Nose 8" Hydraulic 3 Jaw Chuck 8 Station Turret, 1" Stick OD Tools, 1.5" Boring Bar ID 945 IPM Rapids X and Z 2.01" Bar Capacity Hydraulic ...

DMG MORI GILDEMEISTER CTX beta 1250 TC

• Manufacturer: DMG Mori
• Model: CTX BETA 1250 TC

Status: Available | Number of axis: 5-Axis | Tool changer: 24 ATC | Control: SIEMENS 840D | Y axis: 3.93" (100 mm) | B axis: +/- 110 degrees | Spindle number: 2 | Spindle 1: 4,000 rpm | Spindle 2: 5,000 rpm

2009 DMG MORI GILDEMEISTER CTX beta 1250 TC 064366

• Manufacturer: DMG Mori
• Model: CTX BETA 1250 TC

Number of axis: 5-Axis | Tool changer: 24 ATC | Control: SIEMENS 840D | Y axis: 3.93" (100 mm) | B axis: +/- 110 degrees | Spindle number: 2 | Spindle 1: 4,000 rpm | Spindle 2: 5,000 rpm

2010 DMG MORI CTX beta 1250 TC Turn Mill Center

• Manufacturer: DMG Mori
• Model: CTX BETA 1250 TC

Takisawa TC-2 2 Axis CNC Lathe

• Manufacturer: Takisawa
• Model: TC2

Imperial Metric Takisawa TC-2 2 Axis CNC Lathe Max working diam. 9.4" Max length 23.6" Max spindle speed 3200rpm two speed gearbox 8 tool turret 2 axis, Fanuc 0T, Kitigawa 8" hydraulic chuck 16C collet chuck hydr...

Takisawa TC-3 CNC Lathe

• Manufacturer: Takisawa
• Model: TC3
• Spindle bore: 77.978 millimeter

Location Niles, IL Logistics LOADING FEE OF $500.00 WILL BE ADDED TO WINNING INVOICE Lot # 12 System ID # 4346599 End Date Central Standard Time Start Date Central Standard Time Item # 4346600 Fanuc Series 15-T C...

Takisawa TC-20 CNC Lathe

• Manufacturer: Takisawa
• Model: TC20

Location Niles, IL Logistics LOADING FEE OF $600.00 WILL BE ADDED TO WINNING INVOICE Lot # 7 System ID # 4346402 End Date Central Standard Time Start Date Central Standard Time Item # 4346403 Fanuc Series 21-T CN...

2009 DMG MORI GILDEMEISTER CTX beta 1250 TC 5-Axis Turn-Mill center

• Manufacturer: DMG Mori
• Model: CTX BETA 1250 TC

**NEW spindle and NEW window just installed in 2024** 4,000 rpm main spindle 5,000 rpm sub spindle Mist-Fit oil mist extractor B-Axis milling head This machine has been fully aligned and is running parts cur...

2015 DMG MORI GILDEMEISTER CTX beta 800 TC 5-Axis Turn-Mill Center

• Manufacturer: DMG Mori
• Model: CTX BETA 800 TC

Machine was manufactured at Gildemeister Drehmaschinen GmbH in Bielefeld, Germany Approximately only 7,815 program run time hours over the LIFE of the machine: (<4 years of use on average, on a 1 shift basis) ...