SYNKS SPN2
- Manufacturer: SHINX
No.1 installation rate in Japan. Digital positioning ruler control specification with a height of 1,800mm. 1. linear guide rail is adopted for the lifting rail, and more accurate cutting processing is achieved. 2...
Kumagaya, Japan
SYNKS SPN1
- Manufacturer: Thinks
No.1 in Japan in terms of installation rate. Linear guide rails are used for the lifting and lowering rails to achieve more precise cutting processing. 2. standard ruled line setting changed from manual to automa...
Kumagaya, Japan
Matsui Ironworks HP-603
- Manufacturer: Matsui Ironworks
-Blade height can be adjusted by either the blade gauge type for easy adjustment or the set screw type for more precise adjustment. Set screw type for more precise adjustment is available.
Kumagaya, Japan
Matsui Ironworks VC-350
- Manufacturer: Matsui Ironworks
Double insulated, with electric brake Power supply: Single phase 100V | Current: 11A | Power consumption: 1,050W | Mass: 6kg | Chain speed: 7.3 m/s (440 m/min) | Effective length of cut: VC-100:95mmVC-300:300mmVC...
Kumagaya, Japan
Matsui Ironworks KM-101 with 5-minute blade
- Manufacturer: Matsui Ironworks
-Dramatic reduction in processing time. With a 4m length of material, it takes only about 3 minutes to make 18 indentations. -Good finishing accuracy. The newly developed special chip cutter The finish is incompa...
Kumagaya, Japan
Matsui Ironworks KM-101 with 3-minute blade
- Manufacturer: Matsui Ironworks
-Dramatic reduction in processing time. With a 4m length of material, it takes only about 3 minutes to make 18 indentations. -Good finishing accuracy. The newly developed special chip cutter The finish is incompa...
Kumagaya, Japan
Matsui Ironworks VC-300
- Manufacturer: Matsui Ironworks
Double insulated, with electric brake Power supply: Single phase 100V | Current: 11A | Power consumption: 1,050W | Mass: 6kg | Chain speed: 7.3 m/s (440 m/min) | Effective length of cut: VC-100:95mmVC-300:300mmVC...
Kumagaya, Japan
Matsui Ironworks VCR-3
- Manufacturer: Matsui Ironworks
Power supply: Single phase 100V | Current: 15 A | Power consumption: 1,430W | Mass: 10.5kg | Oil tank capacity: 65ml: 5 m | Chain speed: 10.2 m/s (440 m/min) | Effective length of cut: 360mm
Kumagaya, Japan
Matsui Ironworks VC-100
- Manufacturer: Matsui Ironworks
Double insulated, with electric brake Power supply: Single phase 100V | Current: 11A | Power consumption: 1,050W | Mass: 6kg | Chain speed: 7.3 m/s (440 m/min) | Effective length of cut: VC-100:95mmVC-300:300mmVC...
Kumagaya, Japan
2003 Daito GAⅡ510
- Manufacturer: Daito
Product name: Band saw | Main specifications: Cutting capacity: Φ510, □510, saw blade dimensions width thickness length: 41 x 1.27 x 5300 mm, saw blade speed: 10~137
Tokigawa, Japan2005 Amada HFA-700CⅡ
- Manufacturer: Amada
- Model: HFA-700
Product name: Band saw | Main specifications: Cutting capacity: Φ290~Φ700mm, □700×800mm~30×290mm, saw blade dimensions (width/thickness/length): 67×1.6×8300mm, running speed: 15~120m/min (inverter speed change),...
Tokigawa, Japan1991 Amada HFA-300
- Manufacturer: Amada
- Model: HFA-300
Product name: Band saw | Main specifications: Cutting capacity: Φ330, □330×330, Blade dimensions: 32×1.066×4115mm
Tokigawa, Japan1971 Amada V-400
- Manufacturer: Amada
- Model: V-400
Product name: Contour machine | Main specifications: Saw blade speed: 15-90m/m, Saw blade size: 3380-3578, Adjustment amount: 80, Motor saw 1.5Kw, Grinder 0.75kW, SN: 192559
Tokigawa, JapanMakita LS008GZ
- Manufacturer: Makita
Cutting speed is approximately 2.5 times faster Cutting 312mm wide x 62mm high in one shot Saw blade 190mm for cutting 1 inch Shark skin chip saw (A-74354), dust bag, triangular ruler, vertical vise, hex wrench (...
$630 USDKumagaya, JapanMakita 2703
- Manufacturer: Makita
Ideal for cutting materials of fixed dimensions! Electric motor: Direct-wound commutator motor | Voltage: Single-phase AC 100V | Current: 15 A | Frequency: 50/60 Hz | Power consumption: 1,430W | Rotation speed: 4...
$582 USDKumagaya, Japan
Tip: Enter manufacturer, model or keyword