Used machine tools in Wallonia, Belgium

Camera with endoscope KS TOOLS

In black box Endoscope lens Ø 8,5 mm Weight: ± 5 kg | Dimensions: length 370 mm, width 290 mm, height 70 mm

Pulling tool, G+F, type PZV for PFG unit

Pulling tool Additional device for PFG

Grinding tool GREIF, Ø 50 0mm, 60 m/s, cone pulley

• Manufacturer: Greif

7,5 kW, 220/380V Grinding stone: Ø 500mm x 127mm, width 50 mm

Combination woodworking machine

Saw, mill, planer, and drilling machine Dimension: length: 1690mm; width: 1310mm; height: 1000mm 3PS,220V tree-phase 1445/2070r/min All is driven by one motor

Modell inside sandpapering machine ENDE

• Manufacturer: ENDE

Dimensions: length: 500mm; width: 500mm; height: 1100mm Dimensions of the table 500mm ×500mm; height from the ground: 1000mm With 2 speeds With 10 tools (10-150mm)

Sandpapering machine for ALU 600mm, VOGT

Disc in alu 600 mm, 5 speeds Belt, reclining table, quick With board alu,can be changed, and tools for wood, conter point, ...

Tensing testing machine 5 - 30 t, WPM LEIPZIG

Type: VEB ZDM30T, serial number: 2344/57 dossier F.11350 Year of constructon: 1957, weight: ± 2400 kg Motor RAFENA, type: M63154, serial number: 219871, 0,65 kW, 220/380 V, 50 Hz With indicator of forces and hydr...

1998 Core shooter LAEMPE LB20

• Manufacturer: Laempe / Röperwerk

Hydraulic clamping of core boxes on the table Upper part regulated over end switch Table lift and side clamping via electronic path measuring system Core box dimensions and weights Maximum gassing area with gassi...

1998 Core shooter LAEMPE with core mixer LAEMPE SM6_3

• Manufacturer: Laempe / Röperwerk

Hydraulic clamping of core boxes on the table Upper part regulated over end switch Table lift and side clamping via electronic path measuring system Core box dimensions and weights Maximum gassing area with gassi...

1998 Core shooter LAEMPE with core mixer LAEMPE SM6_3

• Manufacturer: Laempe / Röperwerk

Hydraulic clamping of core boxes on the table Upper part regulated over end switch Table lift and side clamping via electronic path measuring system Core box dimensions and weights Maximum gassing area with gassi...

2000 Core shooter LAEMPE LB25 and mixer LAEMPE SM7

• Manufacturer: Laempe / Röperwerk

Corebox measurements and weights Maximum gassing area with gassing manifold (alu): 580mm x 700mm Optional: gassing area with gassing hood and integrated cope eject plate: 550mm x 630mm Optional: shoot head, shoot...

flexion test devicer GF /PFA with drive

• Manufacturer: GF

Dimensions: Length: 660mm; Width: 360mm; Height: 250mm With electric drive and tools for flexion testing

2006 Green sand mixer FONDARC SCOVAL ROTOMAX RTM2000 ±40 to 50t/h 2000 kg

• Manufacturer: Scoval Fondarc

Mixing tools from above With water dosing ROTOKONTOL With power desk, witout control desk and frequency converter With mecanic discharge flap in the bottom

2008 Fettling Centre MAUS SAM300 S

• Manufacturer: Maus

Cast part: length 300mm, width 300mm, height 250mm, Ø 360mm, weight 15 kg With 1 vertical cutting/grinding disc With 1 vertical grinding disc With 1 inside grinding tool

Fettling Centre MAUS SAM 1200-U

• Manufacturer: Maus

Brand: MAUSType: SAM1200 With 1 vertical grinding disc With 1 horizontal grinding disc With 2 internal grinding tools With FANUC robot (celle) With 2 motorised roller conveyors