Processing » CMG » Italy

Building Filters

12

Used CMG Processing in Italy

Trusted Seller
CMG TAURUS 100
- used
- Manufacturer: CMG
No. 1 calibrator No. 8 polishing heads No. 4 chamfering units No. 1 blade cutter
Castelleone, Italy
Trusted Seller
2002 CMG TAURUS 100
- used
- Manufacturer: CMG
Material entry: left | Number of polishing mandrels: 8 | Number of polishing spindles: 8 | Number of bevelers: 4
Domegliara, Italy
Trusted Seller
Bullnose Edge Polishing Machine Cmg Taurus 100/8
- used
- Manufacturer: CMG
Used bullnose edge polishing for straight and bullnose edges with: - N.1 Calibrator/Water drip group - N.4 bevels - N.7 polishing heads - Thickness of the pieces from 20 to 100 mm
Bergamo, Italy
Trusted Seller
Bullnose Edge Polishing Machine Cmg Taurus 02/8R
- used
- Manufacturer: CMG
Used bullnose edge polishing for straight and bullnose edges with: - Abrasive diameter 130/150 mm - N.4 bevels - N.7 polishing heads - Thickness of the pieces from 20 to 100 mm - Workable width 200 mm - Belt widt...
Bergamo, Italy
Trusted Seller
CMG THERMOFORMING
- used
- Manufacturer: CMG
Extruder: A...35mm new B...90mm refurbished C...70mm new New die 1000mm New continuous feeding gear Con air 4 components with vacuum motors ;gravimetric up to 500 kg/h In line CMG grinder with 2 inverter for the...
Negrar di Valpolicella, Italy
Trusted Seller
1999 1 layers CMG blown film machine
- used
- Manufacturer: CMG
Raw material most commonly used are low density polyethylene (LDPE) and High density polyethylene (HDPE). These are often used in blends with other polymers and additives.
Negrar di Valpolicella, Italy
Trusted Seller
2015 5 layers CMG blown film plant
- used
- Manufacturer: CMG
In a blown film extruder PE granulates (or other polymer) are melted in an extruder and pushed through a circular die extruding a tube of molten polymer. Tube is then inflated to multiples of its initial diameter...
Negrar di Valpolicella, Italy
Trusted Seller
2000 1 layers CMG blown film machine
- used
- Manufacturer: CMG
Raw material most commonly used are low density polyethylene (LDPE) and High density polyethylene (HDPE). These are often used in blends with other polymers and additives.
Negrar di Valpolicella, Italy
Trusted Seller
2005 CMG S25-30-SE-C
- used
- Manufacturer: CMG
New 8mm grid New blades New belts Typology: Single shaft | Blower: No | Cyclone: No | Engine power kw:: 4 | Rotating blades n.: 3 | Fixed blades no.: 2 | Rotor diameter mm: 240 | Material extraction: Drawer | Mou...
Cerreto d'Esi, Italy
Trusted Seller
2002 1 layers CMG Blown film extrusion line
- used
- Manufacturer: CMG
Blown film extrusion lines are commonly used to extrude plastic films for flexible packaging industry.
Negrar di Valpolicella, Italy
Trusted Seller
2002 CMG S 40 70 TS AI0273
- used
- Manufacturer: CMG
Extraction of material by fall with provision for lateral aspirator.
Cerreto d'Esi, Italy
1994 EXTRUDER CMG
- used
- Manufacturer: Testa
EXTRUDER BRAND CMG DIAM. 40 YEAR 1994 COMPLETO OF: * MOTOR C.C.
Fossò, Italy