Used Extruders

BERLYN HV-3

• Manufacturer: BERLYN

Used 18" wide Berlyn high velocity air stripper. Model HV-3, Sserial #1021171. Has 5 HP blower, 460 volt, 3 phase, 60 hertz. Includes starter.

GALA 38" x 39"

• Manufacturer: GALA

Used Gala SS bin only. Square construction, 38" x 39" with hinged top cover on 1/3 of top of bin, and openings on balance of 2/3. No pumps or filters included.

2006 Scheer Bay WAA300

• Manufacturer: Scheer

Used 13.5" wide Scheer Bay Model air knife. Model WAA300, Serial #WAA300-0582, new 2006. Driven by a 7.5 HP Baldor Super E motor, 460 volt 3 phase 60 hertz. Includes starter and controls. Caster mounted. Previous...

6.75" Wide

Used 6.75" Wide Air Knife. Top/bottom air input. 72" work height. Includes 1 hp blower, 208-230/460 volt.

GALA 403VDW

• Manufacturer: GALA

Used 50,000 Lb. Per Hour Gala Model 403VDW Stainless Steel Spin Dryer 43" diameter circular housing 20 hp Baldor motor Serial No. 911039-2

AIR KNIFE 6"

• Manufacturer: AIR KNIFE

Used 6" Wide Air Knife With 2 HP Blower

GALA 16.2ECLN-BF

• Manufacturer: GALA

Used Gala Stainless Steel Spin Dryer Model 16.2ECLN-BF Serial #982157

PRODEX 4.5"

• Manufacturer: PRODEX

Used 4.5" pelletizing line consisting of the following: - 4.5" Prodex 34/1 L/D vented extruder including strand die, Lufkin "Change Gear" gearbox with 15.03/1 reduction, and an hydraulic screen changer with pump....

Motan 100

• Manufacturer: Motan

Used 300 lb. Motan model 100 desiccant dryer. No hopper included. Serial #9003860. 6 kW total heater load, 80-100 psi air, 2.3 HP. 240 volt AC input.

1997 PIOVAN T6000ix

• Manufacturer: Piovan

Used 6000 lb Piovan stainless steel drying hopper. New 1997. Hopper model T6000ix. Hoppers are approximately 60" o.d. X 14' tall.

CINCINATTI MILACRON 34" Wide

• Manufacturer: Cincinnati

Used 34" wide Cincinatti Milacron 2-roll sheet take-off with 34" face X 18" diameter rolls. Rolls are mounted in a vertical stack arrangement. Chromed and cored rolls with rotary unions, silent chain driven with ...

THORESON MCCOSH TD360

• Manufacturer: Thoreson McCosh

Used Thoreson McCosh Model TD360 desiccant dryer including approximately 1000 lb. hopper. Rated at approximately 360 lbs. per hour. Includes 10 hp 460 volt motor, Serial #971128.

THORESON MCCOSH TD-24

• Manufacturer: Thoreson McCosh

Used Thoreson McCosh Model TD-24 dehumidifying hopper dryer. Serial #206-152-10. Caster mounted dryer includes 50 lb. capacity insulated hopper mounted on stand. 24 CFM. 480 volt, 3 phase, 60 cycle operation at 9...

NOVATEC CDM-750

• Manufacturer: Novatec
• Model: CDM-750

Used Novatec Desiccant Dryer. Model CDM-750, serial number #12-095, new 1994. Has touch screen micro processor control model MCD-1002. Includes (2) approximatey 1000 lb hoppers with receivers and process heaters....