Used Machine Tools in Massachusetts, USA

G25 Electric Press Brakes (80 Ton, 8.5 ft. bed)

• Manufacturer: Unknown

The G25 features an “O-frame” and is an 80ton 8.5ft. machine. It deflects less than conventional C-frame while still remaining light weight. The G25 electric Press Brake has four servo driven ball screws which cr...

G20 Electric Press Brakes (60 Ton, 6.9ft. Bed)

• Manufacturer: Unknown

The G20 features an “O-frame” and is a 60 ton machine with a 6.9ft. bed length. It deflects less than a conventional C-frame while still remaining lightweight. The G20 electric press brake has three servo driven ...

System Helios E2-25 Pneumatic Knife Holder

Used System Helios E2-25 Pneumatic Shear Knife Holder. Soft-Cut Self-Locking Minimum Slit Width = 25mm Maximum 1000FPM 90mm Blade O.D.

PS50 Shearfeed Systems

• Manufacturer: Automec

The operator loads a blank onto PS 50, locks the parts in place with pneumatic grippers, and sets the feed in motion which automatically triggers a shear, punch or stamping machine. PS 50 advances the material to...

Thune SP45 Screw Press Screen Segment #44528

• Manufacturer: THUNE

Thune SP45 Screw Press Screen Segment, Pattern #5, 1.2 mm Holes, 22.7% Open Area

Sci CHECK 4" Steel Check Valve, 200 Lb Flange, Avva C508, 200W, 2005 #24739

• Manufacturer: SCI

4" Steel Check Valve, 200 Lb Flange, Avva C508, 200w, 2005

4 Evergreen Valve Co CHECK 4" Steel Check Valve, 150 Lb Flange, Wcb, F 6005 #24738

• Manufacturer: 4 EVERGREEN VALVE CO

4" Steel Check Valve, 150 Lb Flange, Wcb, F 6005 Material: STEEL

Sharpe GLOBE 6" Steel Globe Valve, 150 Lb Flange, Body Wcb, Z 1293 #24729

• Manufacturer: SHARPE

6" Steel Globe Valve, 150 Lb Flange, Body Wcb, Z 1293

Beloit DD3000 Refiner Top Flange, 4" Diameter #35595

• Manufacturer: Beloit
• Model: DD3000

Beloit Dd3000 Refiner Top Flange, 4" Diameter, 45 Degree Angle, Stainless Steel

Starrett 823BZ Tubular Inside Micrometer with Box #39276

• Manufacturer: Starrett

Starrett 823bz Tubular Inside Micrometer, With Box

Starrett 449AZ-64 Micrometer Depth Gage #39257

• Manufacturer: Starrett

Starrett 449az-6r Micrometer Depth Gage, With Non-rotating Blade, Unused Storeroom Spare

Goulds 3135 M 4x10x18, 4x12x18 Shaft Flange, 71813 #37273

• Manufacturer: Goulds

Goulds 3135m 4x10x18, 4x12x18 Pump Shaft Flange, Goulds Part No. 71813, Iron, Unused

Manual Hand Sheet Press #41687

Manual Hand Sheet Press Hp: 0

Laboratory Hand Sheet Press For Sheets That Are 11" Diameter Or 9.5" Square #26898

Laboratory Hand Sheet Press For Sheets That Are 11" Diameter Or 9.5" Square, Air Loaded, Brass Press Plate.