Used Machine Tools in Iowa, USA

Clausing 15" Single Spindle Drill Press 1771

• Manufacturer: Clausing
• Model: 1771

Equipped with: Drill chuck Work light Table size: 12" x 18" | Main motor: 3/4 HP, 208/460V, 3 PH | Spindle speeds: 330-2640, variable | Quill travel: 5" | Quill taper: 3MT | Column diameter: 3"

Burgmaster 6 Spindle Turret Drill Press IDL

• Manufacturer: Burgmaster 6 Spindle Turret Drill Press

Equipped with: 3MT holder (4) drill chucks Tapping head

Knuth Single Spindle Drill SSB 50 F Super VT

• Manufacturer: Knuth Werkzeugmaschinen
• Model: SSB50F
• Throat depth: 355.59999999999997 millimeter
• Drilling diameter: 50.038 millimeter

Equipped with: 8” touchscreen control panel Coolant system Tapping unit Operating tools Protective shield Manual LED work lamp Thread cutting feature Table height adjustment Electronic depth stop 4 automati...

Knuth Knuth Single Spindle Drill SSB 32 XN

• Manufacturer: Knuth Werkzeugmaschinen
• Model: SSB32XN
• Throat depth: 317.5 millimeter
• Drilling diameter: 32.004 millimeter

Equipped with: Tapping feature Spindle guide w/emergency stop Work lamp Coolant system Operating tools Manual

Solberga Geared Head Single Spindle Drill SEnr11

• Manufacturer: Solberga
• Model: SENR

Equipped with: Manual downfeed Spindle speeds: 120-1548 (8 steps) | Table size: 14.5" x 18" | Quill travel: 5" | Quill taper: 3MT | Column diameter: 4"

2006 PEDDINGHAUS MDL1000/1B #83783

• Manufacturer: Peddinghaus

SPECIFICATIONS: STD MFG SPECS - PLEASE VERIFY ACTUAL MACHINE FEATURES: UNDER POWER FOR INSPECTIONSTD MFG SPECS - PLEASE VERIFY ACTUAL MACHINETHE OCEAN FLIPPER IS THE MOST POPULAR BEAM FLIPPING DEVICE BECAUSE IT: ...

2016 Boschert 5/32" Hydraulic Corner Notcher Light

• Manufacturer: Boschert

Cutting capacity: 5/32" (10ga) stainless | Cutting length: 8-7/8" x 8-7/8" | Cut angle: 90 degrees | Main motor: 4.5 HP | Strokes per minute: 50 | Table size: 25" F-B x 35" L-R | Machine weight: 1,452 LBS | Mach...

WELDING MACHINES - lot of 3

Lot of 3 WELDING MACHINES (1) MILLER DIALARC AC/DC WELDER 250 (1) MILLER MATIC 200 WELDER (1) NAPA WIRE WELDER CONDITION: UNKNOWN SITE CONTACT: JARED HUMMEL 1145 2ND AVE DES MONIES, IA 50318 (515) 283-7703 The co...

TIRE MACHINE #85144

LITTEL 4 ROLL STRAIGHTNER, S/N: 41298-50 #80782

• Manufacturer: Littell

NOTES: SPECIFICATIONS SUBJECT TO VERIFICATION DELIVERY: IMMEDIATE, SUBJECT TO PRIOR SALE

JET JMD-15 #85662

• Manufacturer: JET
• Model: JMD-15
• Drilling diameter: 25.4 millimeter

DETAILS: Mill drills are a lighter alternative to a milling machine. These combine a belt driven drill press with the dual coordinate abilities of the milling machine's table for flexibility and efficiency. A loc...

JET JDP-20VS-1 #85660

• Manufacturer: JET
• Model: JDP-20VS-1
• Drilling diameter: 28.575 millimeter

DETAILS: Solid design and construction deliver precision operation and control. JET 20” Variable Speed Drill Presses combine variable speed spindles with a massively constructed head that increases accuracy and r...

ELLIS 9400 #86228

• Manufacturer: Ellis
• Model: 9400

SPECIFICATIONS: FEATURES: - POWER DOWN FEED - VARIABLE SPEED FROM 0-1200 RPM - ADJUST SPEEDS WHILE OPERATING IN THE MATERIAL - HIGH TORQUE AT LOW RPM SPEEDS - INSTANTANEOUS REVERSING FOR TAPPING - TAPPING HEAD IS...

JET JDPE-20EVS-PDF #85661

• Manufacturer: JET
• Model: JDPE-20EVS-PDF
• Drilling diameter: 31.75 millimeter

DETAILS: The 20'' JET JDPE-20EVS-PDF Drill Press produces high torque at all speeds in both forward and reverse necessary for a wide range of operations. Spindle is supported by high quality ball bearings reducin...

POWERMATIC 1200 #79256

• Manufacturer: Powermatic
• Model: 1200
• Throat depth: 228.6 millimeter

FEATURES: T-SLOTTED BASE EQUIPPED WITH: COMMANDER MULTI-DRILL HEAD (M#3-22, S#14CV42) **6 SPINDLES ** DRILL FIXTURE NOTES: SPECIFICATIONS SUBJECT TO VERIFICATION DELIVERY: IMMEDIATE, SUBJECT TO PRIOR SALE